{"users":[{"id":8,"username":"Jason","avatar_template":"/user_avatar/3dprintingspace.com/jason/{size}/6148_2.png","admin":true,"trust_level":4},{"id":361,"username":"Glenn","avatar_template":"/user_avatar/3dprintingspace.com/glenn/{size}/728_2.png","moderator":true,"trust_level":4},{"id":2207,"username":"ShadowScythes","avatar_template":"/user_avatar/3dprintingspace.com/shadowscythes/{size}/7691_2.png","trust_level":2},{"id":1245,"username":"Loosenut","avatar_template":"/user_avatar/3dprintingspace.com/loosenut/{size}/3612_2.png","moderator":true,"trust_level":4},{"id":175,"username":"gerritv","avatar_template":"/letter_avatar_proxy/v4/letter/g/e495f1/{size}.png","trust_level":2},{"id":2928,"username":"flyguysh","avatar_template":"/letter_avatar_proxy/v4/letter/f/ee59a6/{size}.png","trust_level":2},{"id":2665,"username":"Den","avatar_template":"/letter_avatar_proxy/v4/letter/d/ce7236/{size}.png","trust_level":4},{"id":2675,"username":"gerscoot","avatar_template":"/letter_avatar_proxy/v4/letter/g/b3f665/{size}.png","trust_level":2},{"id":2004,"username":"Matthew","avatar_template":"/user_avatar/3dprintingspace.com/matthew/{size}/7552_2.png","moderator":true,"trust_level":2},{"id":2644,"username":"lnp00","avatar_template":"/user_avatar/3dprintingspace.com/lnp00/{size}/8763_2.png","trust_level":2},{"id":778,"username":"Blair","avatar_template":"/user_avatar/3dprintingspace.com/blair/{size}/964_2.png","trust_level":2},{"id":1270,"username":"aPrinterIntheWater","avatar_template":"/letter_avatar_proxy/v4/letter/a/a6a055/{size}.png","trust_level":2},{"id":852,"username":"lwindrem","avatar_template":"/letter_avatar_proxy/v4/letter/l/3d9bf3/{size}.png","trust_level":2},{"id":1346,"username":"mykepredko","avatar_template":"/user_avatar/3dprintingspace.com/mykepredko/{size}/4027_2.png","trust_level":4},{"id":399,"username":"f11","avatar_template":"/letter_avatar_proxy/v4/letter/f/2bfe46/{size}.png","trust_level":2},{"id":800,"username":"HobbyMaker3D","avatar_template":"/letter_avatar_proxy/v4/letter/h/bb73d2/{size}.png","trust_level":2},{"id":312,"username":"Kools","avatar_template":"/letter_avatar_proxy/v4/letter/k/3ec8ea/{size}.png","trust_level":2},{"id":2398,"username":"JondZ33","avatar_template":"/letter_avatar_proxy/v4/letter/j/e47c2d/{size}.png","trust_level":2},{"id":2143,"username":"gkenney","avatar_template":"/letter_avatar_proxy/v4/letter/g/4af34b/{size}.png","trust_level":2},{"id":2157,"username":"Vulcan2023","avatar_template":"/letter_avatar_proxy/v4/letter/v/278dde/{size}.png","trust_level":2},{"id":618,"username":"kitedemon","avatar_template":"/letter_avatar_proxy/v4/letter/k/ecae2f/{size}.png","moderator":true,"trust_level":4},{"id":1616,"username":"Davethegearhead","avatar_template":"/user_avatar/3dprintingspace.com/davethegearhead/{size}/5299_2.png","trust_level":2},{"id":1627,"username":"MicroFarmModels","avatar_template":"/letter_avatar_proxy/v4/letter/m/9fc348/{size}.png","trust_level":2},{"id":1345,"username":"BobZahn","avatar_template":"/letter_avatar_proxy/v4/letter/b/eb9ed0/{size}.png","trust_level":2},{"id":2045,"username":"rakender3","avatar_template":"/letter_avatar_proxy/v4/letter/r/f4b2a3/{size}.png","trust_level":2},{"id":2032,"username":"Jobe8302","avatar_template":"/user_avatar/3dprintingspace.com/jobe8302/{size}/7193_2.png","trust_level":2},{"id":2028,"username":"l33tloser","avatar_template":"/letter_avatar_proxy/v4/letter/l/82dd89/{size}.png","trust_level":2},{"id":2008,"username":"Kye","avatar_template":"/letter_avatar_proxy/v4/letter/k/58956e/{size}.png","trust_level":2},{"id":1808,"username":"Blenky","avatar_template":"/letter_avatar_proxy/v4/letter/b/bc79bd/{size}.png","trust_level":2},{"id":1997,"username":"yilmazbozaci","avatar_template":"/letter_avatar_proxy/v4/letter/y/9fc29f/{size}.png","trust_level":2},{"id":1952,"username":"Kota1979","avatar_template":"/letter_avatar_proxy/v4/letter/k/f14d63/{size}.png","trust_level":2},{"id":1829,"username":"Vin","avatar_template":"/letter_avatar_proxy/v4/letter/v/a87d85/{size}.png","trust_level":2},{"id":715,"username":"3DMultiMaker","avatar_template":"/user_avatar/3dprintingspace.com/3dmultimaker/{size}/1037_2.png","trust_level":2},{"id":737,"username":"Scott","avatar_template":"/letter_avatar_proxy/v4/letter/s/3e96dc/{size}.png","trust_level":2},{"id":1794,"username":"MadDog05","avatar_template":"/letter_avatar_proxy/v4/letter/m/a183cd/{size}.png","trust_level":2},{"id":1763,"username":"twoody65","avatar_template":"/letter_avatar_proxy/v4/letter/t/50afbb/{size}.png","trust_level":2},{"id":144,"username":"Rotorfreak","avatar_template":"/letter_avatar_proxy/v4/letter/r/f07891/{size}.png","trust_level":2},{"id":443,"username":"VagabondElf","avatar_template":"/user_avatar/3dprintingspace.com/vagabondelf/{size}/4936_2.png","trust_level":2},{"id":612,"username":"Derrick","avatar_template":"/letter_avatar_proxy/v4/letter/d/d9b06d/{size}.png","trust_level":2},{"id":1696,"username":"TheDGils","avatar_template":"/letter_avatar_proxy/v4/letter/t/76d3ee/{size}.png","trust_level":2},{"id":1640,"username":"Ekicek","avatar_template":"/letter_avatar_proxy/v4/letter/e/a88e57/{size}.png","trust_level":2},{"id":1190,"username":"era99","avatar_template":"/letter_avatar_proxy/v4/letter/e/7ab992/{size}.png","trust_level":2},{"id":1041,"username":"SuperKev","avatar_template":"/letter_avatar_proxy/v4/letter/s/db5fbb/{size}.png","trust_level":2}],"primary_groups":[],"flair_groups":[],"topic_list":{"can_create_topic":false,"filter":"latest","more_topics_url":"/c/3d-printer-firmware/112?page=1","per_page":30,"topics":[{"fancy_title":"About the 3D Printer Firmware category","id":4218,"title":"About the 3D Printer Firmware category","slug":"about-the-3d-printer-firmware-category","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2022-05-25T13:07:59.724Z","last_posted_at":"2022-05-26T13:56:56.806Z","bumped":true,"bumped_at":"2022-05-26T13:56:56.806Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"This is a general Firmware Category \nThere are specific categories below, anything that does not fit below please post here.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":403,"like_count":1,"has_summary":false,"last_poster_username":"Jason","category_id":112,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":361,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"General Firmware Knowledge for Printer Design","id":10089,"title":"General Firmware Knowledge for Printer Design","slug":"general-firmware-knowledge-for-printer-design","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2025-04-23T00:35:58.827Z","last_posted_at":"2025-04-26T17:00:02.686Z","bumped":true,"bumped_at":"2025-04-26T17:00:02.686Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Not sure if this is the right place to ask this, but I’ve started on a project to design and build my own 3D printer from scratch and while I have the mechanical side of things down pretty well, I’m woefully uninformed o…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":88,"like_count":0,"has_summary":false,"last_poster_username":"gerritv","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2207,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":175,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Lost Network capability and Firmware Update thru USB stuck","id":9770,"title":"Lost Network capability and Firmware Update thru USB stuck","slug":"lost-network-capability-and-firmware-update-thru-usb-stuck","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2025-01-03T20:48:11.583Z","last_posted_at":"2025-01-06T14:43:18.798Z","bumped":true,"bumped_at":"2025-01-06T14:43:18.798Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Bought a Ender 3 V3 Plus last week. Has been working amazing out of the box. Today I connect the printer to Creality Print and it says its connected and showing idle. Great. I send a new print to it and after waiting  5m…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":142,"like_count":0,"has_summary":false,"last_poster_username":"Den","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2928,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2665,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Halot mage screen not working after firmware upgrade","id":8325,"title":"Halot mage screen not working after firmware upgrade","slug":"halot-mage-screen-not-working-after-firmware-upgrade","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":null,"created_at":"2024-04-22T14:58:05.917Z","last_posted_at":"2024-04-24T20:53:58.800Z","bumped":true,"bumped_at":"2024-04-24T20:53:58.800Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"hi can i get this machine back working had issues with prints, upgranded the firmware from creality and now screen comes on ,but nothing works, many thanks","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":299,"like_count":0,"has_summary":false,"last_poster_username":"gerscoot","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":2675,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Looking for CR-20 Pro firmware in .BIN","id":8018,"title":"Looking for CR-20 Pro firmware in .BIN","slug":"looking-for-cr-20-pro-firmware-in-bin","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2024-03-14T21:21:04.593Z","last_posted_at":"2024-03-18T15:22:38.525Z","bumped":true,"bumped_at":"2024-03-18T15:22:38.525Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey all, I am currently trying to flash the firmware on two CR-20 Pros, one with BL Touch and one with CR Touch.  I tried flashing with a .HEX file using the SD card but it didn’t seem to take. \nI’m wondering if anyone c…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":229,"like_count":0,"has_summary":false,"last_poster_username":"lnp00","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":2644,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":778,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Firmware, Creality CRS10v2, setting auto-temperatures?","id":7713,"title":"Firmware, Creality CRS10v2, setting auto-temperatures?","slug":"firmware-creality-crs10v2-setting-auto-temperatures","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2024-02-08T12:11:35.508Z","last_posted_at":"2024-02-08T12:11:35.606Z","bumped":true,"bumped_at":"2024-02-08T12:11:35.606Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"i’ve followed instructions to install the MicroSwiss hotend, from CJ, at 3d printing canada.  Excellent instructions. \nit is working well \nBUT, question \nthere is a button to set the temperature of hotend and nozzle, (pr…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":263,"like_count":0,"has_summary":false,"last_poster_username":"aPrinterIntheWater","category_id":117,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1270,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sonic Pad Updates","id":7472,"title":"Sonic Pad Updates","slug":"sonic-pad-updates","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":null,"created_at":"2023-12-22T20:01:09.027Z","last_posted_at":"2023-12-23T08:33:27.604Z","bumped":true,"bumped_at":"2023-12-23T08:33:27.604Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My Ender5 Plus and Sonic pad was working seamlessly until I got the Nov. 7 Update for the Sonic Pad since then I has been down hill. Is it possible the update of Nov. 7 was Faulty ???","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":375,"like_count":1,"has_summary":false,"last_poster_username":"mykepredko","category_id":113,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":852,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sonic Pad Config","id":7471,"title":"Sonic Pad Config","slug":"sonic-pad-config","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2023-12-22T19:10:32.667Z","last_posted_at":"2023-12-22T19:10:32.751Z","bumped":true,"bumped_at":"2023-12-22T21:24:06.466Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My Ender5 Plus and Sonic pad was working seamlessly until I got the Nov. 7 Update for the Sonic Pad since then I has been down hill. Is it possible the update of Nov. 7 was Faulty ??? \nIt all started when a  message came…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":263,"like_count":0,"has_summary":false,"last_poster_username":"lwindrem","category_id":130,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":852,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sonic Pad Klipper Replaces OEM Firmware?","id":7290,"title":"Sonic Pad Klipper Replaces OEM Firmware?","slug":"sonic-pad-klipper-replaces-oem-firmware","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2023-10-26T22:09:19.862Z","last_posted_at":"2023-10-27T05:51:04.110Z","bumped":true,"bumped_at":"2023-10-27T05:51:04.110Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m looking into the Creality Sonic Pad as an add-on to my CR-10 Max. After reviewing Klipper online, I rather like the expanded adjustability and view into the printing process it provides. But I’ve identified two issue…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":659,"like_count":1,"has_summary":false,"last_poster_username":"f11","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":399,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":800,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Klipper Heater extruder not heating at expected rate","id":5363,"title":"Klipper Heater extruder not heating at expected rate","slug":"klipper-heater-extruder-not-heating-at-expected-rate","posts_count":9,"reply_count":3,"highest_post_number":9,"image_url":null,"created_at":"2023-03-06T02:22:15.970Z","last_posted_at":"2023-09-07T19:48:42.095Z","bumped":true,"bumped_at":"2023-09-07T19:48:42.095Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, all fellow 3D printer friends I was hoping you could help me out with an issue I’m having I have a sonic pad running a CR10. I keep getting the error Heater extruder not heating at expected rate and shuts down. he…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":12665,"like_count":3,"has_summary":false,"last_poster_username":"HobbyMaker3D","category_id":113,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":312,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2398,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":800,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Firmware files or Factory Reset for Fokoos Odin 5 f3","id":6681,"title":"Firmware files or Factory Reset for Fokoos Odin 5 f3","slug":"firmware-files-or-factory-reset-for-fokoos-odin-5-f3","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":null,"created_at":"2023-07-04T14:50:30.940Z","last_posted_at":"2023-07-05T20:15:28.211Z","bumped":true,"bumped_at":"2023-07-05T20:15:28.211Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Where can I find the firmware files for the Fokoos Odin 5 f3 printer? \nIs there a way to factory reset  the Fokoos Odin 5 f3 printer? \nThanks. Gene","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1607,"like_count":1,"has_summary":false,"last_poster_username":"gkenney","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":2143,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Need a little advice to fix my CR20 Pro","id":6658,"title":"Need a little advice to fix my CR20 Pro","slug":"need-a-little-advice-to-fix-my-cr20-pro","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2023-07-01T01:26:40.678Z","last_posted_at":"2023-07-03T17:39:54.093Z","bumped":true,"bumped_at":"2023-07-03T17:39:54.093Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, I became a recent owner of a non-working CR20 Pro. The previous owner (allegedly) was using it just fine with Marlin V1.1.6. He upgraded it and it now has a TCM connection error. He gave up and sold it to me. This is…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":372,"like_count":0,"has_summary":false,"last_poster_username":"MicroFarmModels","category_id":117,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2157,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1616,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1627,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sonic Pad Issues - Z Offset","id":5047,"title":"Sonic Pad Issues - Z Offset","slug":"sonic-pad-issues-z-offset","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":null,"created_at":"2023-01-12T19:00:11.802Z","last_posted_at":"2023-04-06T20:18:31.589Z","bumped":true,"bumped_at":"2023-04-06T20:18:31.589Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Been using my Sonic Pad since end of December and had it working decent for many prints. \nRecently all my prints are failing like the nozzle is too far away from the bed on the first layer. \nI have done factory reboot an…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":6458,"like_count":0,"has_summary":false,"last_poster_username":"Jason","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1345,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2045,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ender 3 Pro upgraded to v2","id":5459,"title":"Ender 3 Pro upgraded to v2","slug":"ender-3-pro-upgraded-to-v2","posts_count":7,"reply_count":3,"highest_post_number":7,"image_url":null,"created_at":"2023-03-29T00:00:31.244Z","last_posted_at":"2023-04-03T17:39:44.797Z","bumped":true,"bumped_at":"2023-04-03T17:39:44.797Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have an Ender 3 Pro with original B1 board. I decided to upgrade to the 4.2.7. Board with v2 twist knob screen and I added the CRtouch. I have also added the dual z axis with timing belt. I downloaded the firmware from…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":414,"like_count":0,"has_summary":false,"last_poster_username":"Matthew","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2032,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sonic Pad -> Prusa MK3S Firmware Issues","id":5450,"title":"Sonic Pad -> Prusa MK3S Firmware Issues","slug":"sonic-pad-prusa-mk3s-firmware-issues","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2023-03-27T04:23:48.580Z","last_posted_at":"2023-03-28T04:02:37.128Z","bumped":true,"bumped_at":"2023-03-28T04:02:37.128Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello! Just got a sonic pad for my prusa MK3S, and while following the set up instructions for the user defined model adaptation (Creality Sonic Pad User-Defined Model Adaptation Tutorial (Take Prusa MK3S as an example) …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":922,"like_count":1,"has_summary":false,"last_poster_username":"l33tloser","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":2028,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"CR-10S PRO V2 - BLT Offset not found","id":5392,"title":"CR-10S PRO V2 - BLT Offset not found","slug":"cr-10s-pro-v2-blt-offset-not-found","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2023-03-14T23:24:50.494Z","last_posted_at":"2023-03-24T16:34:42.814Z","bumped":true,"bumped_at":"2023-03-24T16:34:42.814Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey guys! \nFirst off I want to say thanks for this amazing video: INSTALLING A MICRO SWISS DIRECT DRIVE ON CR-10S PRO V2 - YouTube \nI’ve followed it all the way to the end, and even rigged it to print the fan shroud half…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":394,"like_count":1,"has_summary":false,"last_poster_username":"Jason","category_id":117,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2008,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ender 3 S1 Plus Firmware to 300 C","id":5000,"title":"Ender 3 S1 Plus Firmware to 300 C","slug":"ender-3-s1-plus-firmware-to-300-c","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2023-01-01T17:32:06.696Z","last_posted_at":"2023-03-05T16:45:01.470Z","bumped":true,"bumped_at":"2023-03-05T16:45:01.470Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The Ender 3 S1 Plus is limited to 260 C so it limits what filaments you can use. \nI am thinking of upgrading my hot end to 300 C but I am not sure if there is firmware out yet that will allow it to go to 300 C. \nAnyone k…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":3601,"like_count":1,"has_summary":false,"last_poster_username":"yilmazbozaci","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1808,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1627,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1997,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ender five plus firmware","id":5329,"title":"Ender five plus firmware","slug":"ender-five-plus-firmware","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2023-02-23T17:32:13.136Z","last_posted_at":"2023-02-23T21:11:28.296Z","bumped":true,"bumped_at":"2023-02-23T21:11:28.296Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m looking for some help I have downloaded the firmware for the touch screen and the main board I got the touch screen working without the touch I’m trying to go and get the firmware on the main board but it will not lo…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":519,"like_count":0,"has_summary":false,"last_poster_username":"Davethegearhead","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1952,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1616,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Klipper error virtual end stop","id":5171,"title":"Klipper error virtual end stop","slug":"klipper-error-virtual-end-stop","posts_count":9,"reply_count":5,"highest_post_number":9,"image_url":null,"created_at":"2023-01-27T15:05:15.602Z","last_posted_at":"2023-02-22T15:47:31.485Z","bumped":true,"bumped_at":"2023-02-22T15:47:31.485Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have a BTT Manta M8P with CB1. Klipper, Moonraker, Mainsail installed and board flashed. The board is currently powered by USB and Mainsail connected without issue. Now I am modifying the basic Manta M8P printer cfg fi…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":2604,"like_count":3,"has_summary":false,"last_poster_username":"mykepredko","category_id":113,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1616,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":1346,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sonic pad issue","id":4976,"title":"Sonic pad issue","slug":"sonic-pad-issue","posts_count":16,"reply_count":9,"highest_post_number":16,"image_url":"https://storage.3dprintingspace.com/optimized/2X/7/783894057afaa8c9f99b65dae844dabce13f0691_2_1024x768.jpeg","created_at":"2022-12-29T20:22:14.266Z","last_posted_at":"2023-01-10T12:59:40.142Z","bumped":true,"bumped_at":"2023-01-10T12:59:40.142Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I need some help with my CR-10 Smart Pro, I got a Sonic pad for my birthday and after weeks of talking with Creality and try everything I can think of, the Sonic pad will not connect to the printer with the usb cable? An…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":6920,"like_count":0,"has_summary":false,"last_poster_username":"Vin","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1829,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1627,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":715,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":737,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to do a firmware upgrade properly","id":4904,"title":"How to do a firmware upgrade properly","slug":"how-to-do-a-firmware-upgrade-properly","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2022-12-13T03:01:07.692Z","last_posted_at":"2022-12-13T22:43:50.623Z","bumped":true,"bumped_at":"2022-12-13T22:43:50.623Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Question: \nHow do I do a Firmware upgrade on an Ender 3 S1 purchased this fall.   Creality’s instructions are confusing because they are incomplete due to missing steps and details. \nSpecifically: \nI would like to update…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":3001,"like_count":0,"has_summary":false,"last_poster_username":"Jason","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1794,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Adding a webcam to your Duet contoled printer","id":4900,"title":"Adding a webcam to your Duet contoled printer","slug":"adding-a-webcam-to-your-duet-contoled-printer","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/original/2X/6/6239e8106c52a36452a25f8219c87098d43f2224.jpeg","created_at":"2022-12-12T20:14:42.683Z","last_posted_at":"2022-12-12T20:14:42.736Z","bumped":true,"bumped_at":"2022-12-12T20:14:42.736Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Found the very helpful article on setting up an IP camera on your duet Wifi, Though many of you out there would find it useful.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":679,"like_count":0,"has_summary":false,"last_poster_username":"Jason","category_id":114,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Firmware for Creality CR-10S with BLTouch","id":4867,"title":"Firmware for Creality CR-10S with BLTouch","slug":"firmware-for-creality-cr-10s-with-bltouch","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2022-12-04T09:54:29.870Z","last_posted_at":"2022-12-08T14:37:29.908Z","bumped":true,"bumped_at":"2022-12-08T14:37:29.908Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Does anyone have the firmware for a Creality CR-10S with a BLTouch?  I flashed mine with supposedly the newest firmware but it just messed up printer and it won’t print now.  I know how to put all the info into Marlin bu…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":519,"like_count":0,"has_summary":false,"last_poster_username":"Jason","category_id":117,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1763,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Marlin 2.1.1 Number of ‘Z’ Stepper Driver selection GONE?","id":4668,"title":"Marlin 2.1.1 Number of 'Z' Stepper Driver selection GONE?","slug":"marlin-2-1-1-number-of-z-stepper-driver-selection-gone","posts_count":14,"reply_count":8,"highest_post_number":14,"image_url":null,"created_at":"2022-10-12T13:20:16.667Z","last_posted_at":"2022-10-30T15:03:30.724Z","bumped":true,"bumped_at":"2022-10-30T15:03:30.724Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone. \nI have CR10S4 which came equipped with dual ‘Z’ steppers hooked up in series and plugged in to one driver. We all know the issues with gantry drop when powered off. I tried anti-backlash screws but find the…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":2205,"like_count":1,"has_summary":false,"last_poster_username":"Blair","category_id":117,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":144,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":778,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Printer settings lost?","id":4553,"title":"Printer settings lost?","slug":"printer-settings-lost","posts_count":10,"reply_count":5,"highest_post_number":10,"image_url":null,"created_at":"2022-09-05T13:50:04.566Z","last_posted_at":"2022-10-13T18:48:53.175Z","bumped":true,"bumped_at":"2022-10-13T18:48:53.175Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve had my CR10S4 for some time now and last year I upgraded the MB, installed new drivers, direct drive, improved bed heating etc. I learned how to use Marlin and Pronterface. I got everything working and my prints wer…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":411,"like_count":1,"has_summary":false,"last_poster_username":"Rotorfreak","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":144,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":443,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Having problems building the Marlin firmware suddenly?","id":4663,"title":"Having problems building the Marlin firmware suddenly?","slug":"having-problems-building-the-marlin-firmware-suddenly","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/9/91e425e9a10e8a67d41e8ba320bbc852f5a55bc4_2_1024x576.jpeg","created_at":"2022-10-09T14:49:46.579Z","last_posted_at":"2022-10-09T14:49:46.732Z","bumped":true,"bumped_at":"2022-10-09T14:49:46.732Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"How to properly reinstall Visual Studio Code to get your Marlin firmware build environment working again: \n  \n    \n  \n\n#vscode #visualstudio #marlin #firmware #creality #ender5pro #tech #3dprint #3dprinting","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":267,"like_count":1,"has_summary":false,"last_poster_username":"Derrick","category_id":112,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":612,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"PIDTEMP calibration","id":4659,"title":"PIDTEMP calibration","slug":"pidtemp-calibration","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2022-10-07T20:24:12.590Z","last_posted_at":"2022-10-07T20:24:12.766Z","bumped":true,"bumped_at":"2022-10-07T20:24:12.766Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello Hello everybody, \nI have a DELTA KOSSEL K800XL I change original board to a SKR1.3+TMC2226 (TMC2209) \nI use marlin 2.1.x \nI try to calibrate PIDTEMP and PIDTEMPBED. \nI use pronterface to do it : \nM503 to get ref of…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":448,"like_count":0,"has_summary":false,"last_poster_username":"TheDGils","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1696,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Robo3D R1+ Screen Upgrade Issue (Help Needed)","id":4521,"title":"Robo3D R1+ Screen Upgrade Issue (Help Needed)","slug":"robo3d-r1-screen-upgrade-issue-help-needed","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2022-08-22T15:12:52.927Z","last_posted_at":"2022-08-22T15:12:53.071Z","bumped":true,"bumped_at":"2022-08-22T15:12:53.071Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, first time posting here and I was wondering if anyone could help me out. Id like to preface this by saying I am a novice, I don’t know much about 3D printing or printers. I do know how to use Arduino loosely. \nI’v…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":390,"like_count":0,"has_summary":false,"last_poster_username":"Ekicek","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1640,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Build a new release of Marlin","id":4348,"title":"Build a new release of Marlin","slug":"build-a-new-release-of-marlin","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2022-06-20T23:15:44.010Z","last_posted_at":"2022-06-22T14:34:13.611Z","bumped":true,"bumped_at":"2022-06-22T14:34:13.611Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve previously built Marlin 2.0.9.3 for my Ender 3 Max, and have been using it for a while. \nI want to re-flash the printer, but would like to update to the 2.1.x release. \nDoes anyone have experience upgrading Marlin v…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":554,"like_count":0,"has_summary":false,"last_poster_username":"era99","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1190,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"CR10 Max Firmware upload issues","id":4347,"title":"CR10 Max Firmware upload issues","slug":"cr10-max-firmware-upload-issues","posts_count":7,"reply_count":1,"highest_post_number":7,"image_url":null,"created_at":"2022-06-20T22:15:36.471Z","last_posted_at":"2022-06-22T10:11:20.489Z","bumped":true,"bumped_at":"2022-06-22T10:11:20.489Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have a fairly new CR10 MAX, (just over a year). I had upgraded the firmware to Tiny machines v7.4.3 because I did some upgrades.  All was fine until a couple weeks ago and then I started getting errors. (Similar to ano…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":757,"like_count":0,"has_summary":false,"last_poster_username":"kitedemon","category_id":112,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1041,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]}]}}