# 3D Printer Parts **URL:** https://3dprintingspace.com/c/3d-printer-parts/54.md [Latest](https://3dprintingspace.com/latest.md) · [Categories](https://3dprintingspace.com/categories.md) --- ## [About the 3D Printer Parts category](https://3dprintingspace.com/t/about-the-3d-printer-parts-category/72)
**Author:** [@tony](https://3dprintingspace.com/u/tony)\ **Replies:** 1\ **Last updated:** [May 6, 2022, 2:01pm UTC](https://3dprintingspace.com/t/about-the-3d-printer-parts-category/72 "2022-05-06T14:01:24Z")
Discuss hardware upgrades and components for 3D printers available on the market --- ## [AMS2 Really? Again?](https://3dprintingspace.com/t/ams2-really-again/10421)
**Author:** [@kitedemon](https://3dprintingspace.com/u/kitedemon)\ **Replies:** 2\ **Last updated:** [June 14, 2026, 1:18am UTC](https://3dprintingspace.com/t/ams2-really-again/10421 "2026-06-14T01:18:34Z")
My AMS2 is again having issues. The AMS units I have I converted them to Python ams. The reliability when from absolutely unreliable to rock solid, I use the spool refill function all the time. The AMS2 is rapidly becom… --- ## [Your goto printed master refill spool design?](https://3dprintingspace.com/t/your-goto-printed-master-refill-spool-design/10320)
**Author:** [@Watever44](https://3dprintingspace.com/u/Watever44)\ **Replies:** 5\ **Last updated:** [January 21, 2026, 4:16am UTC](https://3dprintingspace.com/t/your-goto-printed-master-refill-spool-design/10320 "2026-01-21T04:16:56Z")
Hi everyone, I just ordered my first refill spool from 3d Printing Canada and I was wondering what other are using as master spool ? I have used that spool model : MasterSpool for BambuLab filament, BambuLab spool, Bam… --- ## [Question about Bambu Part # lookups](https://3dprintingspace.com/t/question-about-bambu-part-lookups/10308)
**Author:** [@Jason](https://3dprintingspace.com/u/Jason)\ **Replies:** 2\ **Last updated:** [December 24, 2025, 9:17am UTC](https://3dprintingspace.com/t/question-about-bambu-part-lookups/10308 "2025-12-24T09:17:45Z")
Good Day all I know I work on them all the time but I always find it a little cumbersome about looking up part #s for Bambu printers. I have a basic list and descriptions for some parts. Does anyone have a good part # l… --- ## [Question about Extra Hot ends and nozzles for P1S](https://3dprintingspace.com/t/question-about-extra-hot-ends-and-nozzles-for-p1s/10297)
**Author:** [@Bobbi1977](https://3dprintingspace.com/u/Bobbi1977)\ **Replies:** 9\ **Last updated:** [December 3, 2025, 2:40am UTC](https://3dprintingspace.com/t/question-about-extra-hot-ends-and-nozzles-for-p1s/10297 "2025-12-03T02:40:50Z")
Hi all! I am looking to buy an extra hot end and nozzle for my P1S - just in case something happens to the original. (also want to get a different size nozzle and I hear its easier to swap out if I just get the hot end… --- ## [Common Connectors used in 3D printers - A guide](https://3dprintingspace.com/t/common-connectors-used-in-3d-printers-a-guide/10286)
**Author:** [@Jason](https://3dprintingspace.com/u/Jason)\ **Replies:** 0\ **Last updated:** [November 30, 2025, 11:47pm UTC](https://3dprintingspace.com/t/common-connectors-used-in-3d-printers-a-guide/10286 "2025-11-30T23:47:59Z")
I have tried to outline some of the common connectors used in 3D printers, I have included Descriptors and 3rd party suppliers for the various connectors you may find on a 3D Printer. A great overview of the crimping pro… --- ## [Be Warned: CFS Upgrade for K1 Series](https://3dprintingspace.com/t/be-warned-cfs-upgrade-for-k1-series/10094)
**Author:** [@SeanSemple](https://3dprintingspace.com/u/SeanSemple)\ **Replies:** 3\ **Last updated:** [June 24, 2025, 9:23pm UTC](https://3dprintingspace.com/t/be-warned-cfs-upgrade-for-k1-series/10094 "2025-06-24T21:23:40Z")
Instructions were extremely lacking right out of the gate, I’ve got 7 hours into this now over 5 of which are troubleshooting the extremely random errors from the cutter “jamming” or extrusion issues or “filament jammed … --- ## [Turtle Box to understand it](https://3dprintingspace.com/t/turtle-box-to-understand-it/9966)
**Author:** [@Hellmut1956](https://3dprintingspace.com/u/Hellmut1956)\ **Replies:** 6\ **Last updated:** [June 24, 2025, 1:57pm UTC](https://3dprintingspace.com/t/turtle-box-to-understand-it/9966 "2025-06-24T13:57:35Z")
I read on YouTube about the Turtle Box, which seems to be a DIY MMS. I do own a QIDI Plus 4, and I am thrilled about how it does its job. What I am looking for next is the multicolor printing. Is the Turtle Box a way to… --- ## [K1Max incompatible Thermistor](https://3dprintingspace.com/t/k1max-incompatible-thermistor/10159)
**Author:** [@NickGarai](https://3dprintingspace.com/u/NickGarai)\ **Replies:** 1\ **Last updated:** [June 19, 2025, 8:58pm UTC](https://3dprintingspace.com/t/k1max-incompatible-thermistor/10159 "2025-06-19T20:58:51Z")
On my K1Max I bought two hot ends. They are both incompatible. The old thermal adaptor in my heat sink will not come out so I cannot put in the new thermal adaptor. Yes, I removed the set screw. On the end of the the… --- ## [Infinity flow 30 days later](https://3dprintingspace.com/t/infinity-flow-30-days-later/10062)
**Author:** [@kitedemon](https://3dprintingspace.com/u/kitedemon)\ **Replies:** 2\ **Last updated:** [April 14, 2025, 10:44pm UTC](https://3dprintingspace.com/t/infinity-flow-30-days-later/10062 "2025-04-14T22:44:32Z")
I have been trying an infinity flow recently. It is working exactly as advertised and so far is rock solid. The base unit will automatically change filament as it runs out with zero issues. I have used this feature in a… --- ## [Co Print MMS System Anyone Try?](https://3dprintingspace.com/t/co-print-mms-system-anyone-try/10041)
**Author:** [@SnackMaster](https://3dprintingspace.com/u/SnackMaster)\ **Replies:** 0\ **Last updated:** [April 1, 2025, 8:21pm UTC](https://3dprintingspace.com/t/co-print-mms-system-anyone-try/10041 "2025-04-01T20:21:15Z")
Hi everyone! I have on order a Co Print KCM Set for klipper, wanted to know if anyone has any experience with Co Print? Am planning on installing it on my modified CR10s Pro V2 but I also just bought a Qidi X-Max 3 tha… --- ## [CFS Upgrade for K1](https://3dprintingspace.com/t/cfs-upgrade-for-k1/9993)
**Author:** [@HobbyMaker3D](https://3dprintingspace.com/u/HobbyMaker3D)\ **Replies:** 4\ **Last updated:** [March 7, 2025, 10:33pm UTC](https://3dprintingspace.com/t/cfs-upgrade-for-k1/9993 "2025-03-07T22:33:09Z")
I hope these become available soon at 3D Printing Canada. Looks promising! --- ## [CR-X Pro Micro SD Card Question](https://3dprintingspace.com/t/cr-x-pro-micro-sd-card-question/9914)
**Author:** [@Carlosk12](https://3dprintingspace.com/u/Carlosk12)\ **Replies:** 4\ **Last updated:** [February 12, 2025, 6:10pm UTC](https://3dprintingspace.com/t/cr-x-pro-micro-sd-card-question/9914 "2025-02-12T18:10:31Z")
I need a new micro sd card for my Creality CR-X pro and i was wondering if you need to have a netac card or is it just recommended? Thank you in advance. --- ## [Resin vat warmer inquiry](https://3dprintingspace.com/t/resin-vat-warmer-inquiry/9854)
**Author:** [@MMPRamy](https://3dprintingspace.com/u/MMPRamy)\ **Replies:** 2\ **Last updated:** [February 4, 2025, 4:23pm UTC](https://3dprintingspace.com/t/resin-vat-warmer-inquiry/9854 "2025-02-04T16:23:11Z")
So I realize that I’ve been getting frequent failed prints (most likely due to colder temperatures) for my sonic mighty 4k, and came across this product that’s a thermal vat band that goes around the vat itself and warms… --- ## [Diamondback Nozzles](https://3dprintingspace.com/t/diamondback-nozzles/9825)
**Author:** [@rsterne](https://3dprintingspace.com/u/rsterne)\ **Replies:** 0\ **Last updated:** [January 18, 2025, 6:38pm UTC](https://3dprintingspace.com/t/diamondback-nozzles/9825 "2025-01-18T18:38:17Z")
I did a couple of tests with the 0.6mm Diamondback nozzle, here are the results… I know only two datapoints are not the greatest, but all I really wanted to know was if there was an increase or decrease in strength wi… --- ## [Looking for exstruder for my CR M4](https://3dprintingspace.com/t/looking-for-exstruder-for-my-cr-m4/7415)
**Author:** [@1954\_3d\_printer](https://3dprintingspace.com/u/1954_3d_printer)\ **Replies:** 4\ **Last updated:** [January 4, 2025, 1:30am UTC](https://3dprintingspace.com/t/looking-for-exstruder-for-my-cr-m4/7415 "2025-01-04T01:30:18Z")
Hello 3d My extruder jammed up at 95% of 100hr guitar build. Searching for a new extruder. Anyone aware of where to buy one? Thanks in advance Dan --- ## [Corexy Mercury sold in EU](https://3dprintingspace.com/t/corexy-mercury-sold-in-eu/8661)
**Author:** [@Hellmut1956](https://3dprintingspace.com/u/Hellmut1956)\ **Replies:** 3\ **Last updated:** [September 4, 2024, 4:02pm UTC](https://3dprintingspace.com/t/corexy-mercury-sold-in-eu/8661 "2024-09-04T16:02:24Z")
I have an Ender 5 Plus and would like to upgrade it by adding Corexy. Mercury 1.1 is such a kit but not available in the EU, at least I was not able to find such a source. But if there are other kita to do such an upgrad… --- ## [Lost hammock for monoprice delta mini](https://3dprintingspace.com/t/lost-hammock-for-monoprice-delta-mini/9272)
**Author:** [@rnleao](https://3dprintingspace.com/u/rnleao)\ **Replies:** 2\ **Last updated:** [August 31, 2024, 2:17am UTC](https://3dprintingspace.com/t/lost-hammock-for-monoprice-delta-mini/9272 "2024-08-31T02:17:21Z")
Hi all, I am trying to revive my old monoprice mini delta and it is missing the hammock (the original part was a flat late with bent flaps to connect the 6 little arms. I tried to source a replacement with no luck. There… --- ## [Cooling fan upgrade for Ender 5 plus](https://3dprintingspace.com/t/cooling-fan-upgrade-for-ender-5-plus/9012)
**Author:** [@JudahCo](https://3dprintingspace.com/u/JudahCo)\ **Replies:** 9\ **Last updated:** [August 20, 2024, 9:07pm UTC](https://3dprintingspace.com/t/cooling-fan-upgrade-for-ender-5-plus/9012 "2024-08-20T21:07:56Z")
I want to upgrade my Ender 5 plus with a dual 5015 24v Satsana cooling upgrade or a dual 5015 hero me gen 7 cooling system. But I would like to know if the ender 5 plus stock board will be able to handle the power draw o… --- ## [Ender 3 replacement Encoder](https://3dprintingspace.com/t/ender-3-replacement-encoder/7977)
**Author:** [@Andy.wpg](https://3dprintingspace.com/u/Andy.wpg)\ **Replies:** 0\ **Last updated:** [March 9, 2024, 8:45pm UTC](https://3dprintingspace.com/t/ender-3-replacement-encoder/7977 "2024-03-09T20:45:47Z")
I had a failure on the rotary encoder on my Ender 3 Pro. This is the “menu button” that you move and select with. The one I have has this display: Rather than spend approximately $50 on a replacement display, I dec… --- ## [CR 5 Pro -Issues with mainboard](https://3dprintingspace.com/t/cr-5-pro-issues-with-mainboard/7972)
**Author:** [@Almostgem](https://3dprintingspace.com/u/Almostgem)\ **Replies:** 4\ **Last updated:** [March 9, 2024, 1:40pm UTC](https://3dprintingspace.com/t/cr-5-pro-issues-with-mainboard/7972 "2024-03-09T13:40:52Z")
Hi All, Several months ago I purchased a Creality CR-5 H Pro directly from Creality. I only got to setting it up about 3 or 4 weeks ago now and immediately began having issues. First thing I noticed was that the dongle … --- ## [Ender 3 Thermistor](https://3dprintingspace.com/t/ender-3-thermistor/7925)
**Author:** [@garyogden1957uk](https://3dprintingspace.com/u/garyogden1957uk)\ **Replies:** 7\ **Last updated:** [March 6, 2024, 6:43pm UTC](https://3dprintingspace.com/t/ender-3-thermistor/7925 "2024-03-06T18:43:14Z")
Looking like I will have to change my Thermistor part as I am having Runway issues today, although I did a print over 10 hours yesterday? Is it worth upgrading to a new Hotend upgrade like this one? Link --- ## [Hardened Steel Nozzles for Ender 5 S-1?](https://3dprintingspace.com/t/hardened-steel-nozzles-for-ender-5-s-1/7121)
**Author:** [@rsterne](https://3dprintingspace.com/u/rsterne)\ **Replies:** 9\ **Last updated:** [December 31, 2023, 7:01pm UTC](https://3dprintingspace.com/t/hardened-steel-nozzles-for-ender-5-s-1/7121 "2023-12-31T19:01:09Z")
Does anyone have a source for these?.. I understand that the Ender 7 uses the same ones, but Creality don’t sell any!.. Bob --- ## [Alternatives for the bowden tube?](https://3dprintingspace.com/t/alternatives-for-the-bowden-tube/7451)
**Author:** [@KeldSor](https://3dprintingspace.com/u/KeldSor)\ **Replies:** 10\ **Last updated:** [December 18, 2023, 9:42pm UTC](https://3dprintingspace.com/t/alternatives-for-the-bowden-tube/7451 "2023-12-18T21:42:50Z")
Are the some cheaper alternatives for the bowden tube for CR10s PRO ? --- ## [Why use different nozzle materials?](https://3dprintingspace.com/t/why-use-different-nozzle-materials/7434)
**Author:** [@Demonearth](https://3dprintingspace.com/u/Demonearth)\ **Replies:** 1\ **Last updated:** [December 12, 2023, 6:22pm UTC](https://3dprintingspace.com/t/why-use-different-nozzle-materials/7434 "2023-12-12T18:22:23Z")
I was looking to get spare nozzles for my Neptune 4 Max when I came across these ones. https://www.aliexpress.com/item/1005005852871405.html They offer steel and hardened steel as well as brass. Is there a specific rea… --- ## [Better holding for the capricorn bowden tube?](https://3dprintingspace.com/t/better-holding-for-the-capricorn-bowden-tube/7429)
**Author:** [@KeldSor](https://3dprintingspace.com/u/KeldSor)\ **Replies:** 6\ **Last updated:** [December 10, 2023, 4:06am UTC](https://3dprintingspace.com/t/better-holding-for-the-capricorn-bowden-tube/7429 "2023-12-10T04:06:03Z")
I notice that when you have a lot of moving back and forth of the filament the bowden tubing have a tendency to loosen up from the holder - I think I have a good quality holder, but what do you do ? (I’m NOT ready to go… --- ## [Anyone add a touchscreen to a Ender 3?](https://3dprintingspace.com/t/anyone-add-a-touchscreen-to-a-ender-3/3388)
**Author:** [@derek3pugh](https://3dprintingspace.com/u/derek3pugh)\ **Replies:** 16\ **Last updated:** [December 3, 2023, 12:58pm UTC](https://3dprintingspace.com/t/anyone-add-a-touchscreen-to-a-ender-3/3388 "2023-12-03T12:58:57Z")
I have had my Ender 3 for a year now… not the Rolls Royce of 3d printers but it has taught me well and serves my needs well and with basic maint will run for years (I hope). The only thing I really don’t like is the con… --- ## [M3201 Micro Swiss NG direct drive extruder](https://3dprintingspace.com/t/m3201-micro-swiss-ng-direct-drive-extruder/7409)
**Author:** [@Tom](https://3dprintingspace.com/u/Tom)\ **Replies:** 3\ **Last updated:** [December 2, 2023, 3:33pm UTC](https://3dprintingspace.com/t/m3201-micro-swiss-ng-direct-drive-extruder/7409 "2023-12-02T15:33:31Z")
Good rainy Friday evening. This week I purchased the above extruder. I have it installed and after a few false starts (mostly my fault and learning as I went) it is working. I have to mention here that I followed BJ’s vi… --- ## [Need help with new motherboard and Cr touch install](https://3dprintingspace.com/t/need-help-with-new-motherboard-and-cr-touch-install/7326)
**Author:** [@Soggydawg](https://3dprintingspace.com/u/Soggydawg)\ **Replies:** 3\ **Last updated:** [November 5, 2023, 5:36pm UTC](https://3dprintingspace.com/t/need-help-with-new-motherboard-and-cr-touch-install/7326 "2023-11-05T17:36:27Z")
Hi, I am new to some of this but decided to upgrade my motherboard on my Ender 3 to the Creality silent motherboard, the 4.2.7 I believe. And add a Cr Touch at the same time. I installed everything and grabbed the firm… --- ## [Creality Spider Heating Block](https://3dprintingspace.com/t/creality-spider-heating-block/7262)
**Author:** [@griffinmt](https://3dprintingspace.com/u/griffinmt)\ **Replies:** 1\ **Last updated:** [October 16, 2023, 4:02pm UTC](https://3dprintingspace.com/t/creality-spider-heating-block/7262 "2023-10-16T16:02:13Z")
I am trying to obtain the heating block for the Spider (not V2 or V3). Mine is damaged. [Next page](https://3dprintingspace.com/c/3d-printer-parts/54.md?page=1)