# 3D Printers **URL:** https://3dprintingspace.com/c/3d-printers/53.md?page=1 [Latest](https://3dprintingspace.com/latest.md) · [Categories](https://3dprintingspace.com/categories.md) **Page:** 2 --- ## [3D Printer Upgraded to 300+ nozzle](https://3dprintingspace.com/t/3d-printer-upgraded-to-300-nozzle/3824)
**Author:** [@mattfritz](https://3dprintingspace.com/u/mattfritz)\ **Replies:** 2\ **Last updated:** [February 28, 2022, 3:48pm UTC](https://3dprintingspace.com/t/3d-printer-upgraded-to-300-nozzle/3824 "2022-02-28T15:48:03Z")
I’m wondering if anyone here has done an upgrade on a cheaper printer to 300+ nozzle temperature and upgraded the bed as well. I’m trying to avoid spending 4K+ on a printer that prints exotic materials when I can spend l… --- ## [New printer,,, Goofoo](https://3dprintingspace.com/t/new-printer-goofoo/3660)
**Author:** [@Glenn](https://3dprintingspace.com/u/Glenn)\ **Replies:** 12\ **Last updated:** [February 22, 2022, 1:09pm UTC](https://3dprintingspace.com/t/new-printer-goofoo/3660 "2022-02-22T13:09:35Z")
--- ## [Hiprecy Leo Printer](https://3dprintingspace.com/t/hiprecy-leo-printer/3777)
**Author:** [@hblyleven](https://3dprintingspace.com/u/hblyleven)\ **Replies:** 2\ **Last updated:** [February 17, 2022, 12:31pm UTC](https://3dprintingspace.com/t/hiprecy-leo-printer/3777 "2022-02-17T12:31:57Z")
I have a Hiprecy Leo Printer. It had been working well, but now I have a Thermal Runaway error. I have it set to 200, it goes up to 190, starts, and then quickly loses 15 degrees, slowly goes up, continues to print, and… --- ## [Ender 3 Max 3D Printer](https://3dprintingspace.com/t/ender-3-max-3d-printer/3442)
**Author:** [@Ender-3\_Max.S](https://3dprintingspace.com/u/Ender-3_Max.S)\ **Replies:** 9\ **Last updated:** [February 13, 2022, 11:25pm UTC](https://3dprintingspace.com/t/ender-3-max-3d-printer/3442 "2022-02-13T23:25:16Z")
I am the very beginner of the 3D printing. How is the Ender 3 Max 3D printer? Is this a good 3D printer to have for beginner? Does the printer have any problems often? Does the Ender 3 Max have problems with extruder or… --- ## [Creality Ender 6 heated bed](https://3dprintingspace.com/t/creality-ender-6-heated-bed/3389)
**Author:** [@jeanh](https://3dprintingspace.com/u/jeanh)\ **Replies:** 6\ **Last updated:** [February 7, 2022, 3:44am UTC](https://3dprintingspace.com/t/creality-ender-6-heated-bed/3389 "2022-02-07T03:44:22Z")
hi i have a ender 6 filmware v1.0.4.9 mainboard v4.3.1 Creality annonce Technical Specification ≤110°C for the bed but mine does not go higher 100°C and on my touchscreen we only see 0 -100°C for preheat the bed m… --- ## [Custom Printer - Z increase](https://3dprintingspace.com/t/custom-printer-z-increase/3546)
**Author:** [@adamfilip](https://3dprintingspace.com/u/adamfilip)\ **Replies:** 0\ **Last updated:** [January 23, 2022, 7:47pm UTC](https://3dprintingspace.com/t/custom-printer-z-increase/3546 "2022-01-23T19:47:36Z")
Z height increase almost ready A few things to figure out but 90% done --- ## [Anet ET5 Pro starting problems](https://3dprintingspace.com/t/anet-et5-pro-starting-problems/3386)
**Author:** [@Caistor](https://3dprintingspace.com/u/Caistor)\ **Replies:** 4\ **Last updated:** [January 1, 2022, 9:47pm UTC](https://3dprintingspace.com/t/anet-et5-pro-starting-problems/3386 "2022-01-01T21:47:00Z")
Hello guys, Does any of you have experience with the ET5 Pro? I’ve recently bought a new one and have trouble setting the Z-offset. Pronterface can send commands to the ET5, but doesn’t receive any response back. --- ## [Lowest Priced Resin Printer?](https://3dprintingspace.com/t/lowest-priced-resin-printer/721)
**Author:** [@Willy](https://3dprintingspace.com/u/Willy)\ **Replies:** 7\ **Last updated:** [December 12, 2021, 7:05pm UTC](https://3dprintingspace.com/t/lowest-priced-resin-printer/721 "2021-12-12T19:05:52Z")
I notice the price of Resin Printers keep coming down. What is the lowest you can get one that works? Cheers Willy --- ## [Binder jet 3d printer Easy3DP-M450 produced by EasyMFG](https://3dprintingspace.com/t/binder-jet-3d-printer-easy3dp-m450-produced-by-easymfg/3355)
**Author:** [@EasyMFG](https://3dprintingspace.com/u/EasyMFG)\ **Replies:** 0\ **Last updated:** [December 9, 2021, 7:30am UTC](https://3dprintingspace.com/t/binder-jet-3d-printer-easy3dp-m450-produced-by-easymfg/3355 "2021-12-09T07:30:32Z")
Images of Easy3DP-M450 Details of Easy3DP-M450 Equipment Model Easy3DP-M450 Build Box 450mm×220mmx300mm External Dimensions 1275mmx825mmx1465mm Layer Height 0.04mm-0.2mm(Can be adjustable) Printing … --- ## [BIQU B1 hot end and now bed not heating](https://3dprintingspace.com/t/biqu-b1-hot-end-and-now-bed-not-heating/3270)
**Author:** [@Peachdaydreams](https://3dprintingspace.com/u/Peachdaydreams)\ **Replies:** 8\ **Last updated:** [November 13, 2021, 4:42pm UTC](https://3dprintingspace.com/t/biqu-b1-hot-end-and-now-bed-not-heating/3270 "2021-11-13T16:42:34Z")
at 1st i thought i had a clogged nozzle after fiddling with it for a bit i now realize the hot end on my BIQU B1 is not heating and reads on the screen is stuck as -14 … while trouble shooting what i thought was a clogg… --- ## [BIQU B1 by BigTreeTech - This things neat](https://3dprintingspace.com/t/biqu-b1-by-bigtreetech-this-things-neat/940)
**Author:** [@chris](https://3dprintingspace.com/u/chris)\ **Replies:** 141\ **Last updated:** [November 3, 2021, 9:38pm UTC](https://3dprintingspace.com/t/biqu-b1-by-bigtreetech-this-things-neat/940 "2021-11-03T21:38:23Z")
The BIQU B1 by BigTreeTech is a cool machine because as most users know one of the most popular upgrades on a Creality Ender 3 is a Big Tree Tech SKR mini-board. Packed with Big Tree Tech components and with a one-click … --- ## [What would you do with it?](https://3dprintingspace.com/t/what-would-you-do-with-it/3044)
**Author:** [@Jason](https://3dprintingspace.com/u/Jason)\ **Replies:** 16\ **Last updated:** [October 10, 2021, 10:16pm UTC](https://3dprintingspace.com/t/what-would-you-do-with-it/3044 "2021-10-10T22:16:58Z")
I have a machine that I have the ability to do with whatever I really want to. Its has no plan right now and all of the electronics have been stripped. Its started life as an ender 5 plus, frame motors and mechanics ar… --- ## [Temperature stability with MicroSwiss hot end](https://3dprintingspace.com/t/temperature-stability-with-microswiss-hot-end/3042)
**Author:** [@Caistor](https://3dprintingspace.com/u/Caistor)\ **Replies:** 9\ **Last updated:** [September 16, 2021, 3:45pm UTC](https://3dprintingspace.com/t/temperature-stability-with-microswiss-hot-end/3042 "2021-09-16T15:45:09Z")
Hi all. I recently equipped my second CR 10-S Pro V2 with a Micro Swiiss hot end. It worked well after I found the correct printng temperature for my filament. For another part I needed to change filament, so I first … --- ## [Deveations along the Y-axis](https://3dprintingspace.com/t/deveations-along-the-y-axis/2985)
**Author:** [@Caistor](https://3dprintingspace.com/u/Caistor)\ **Replies:** 23\ **Last updated:** [September 4, 2021, 1:18pm UTC](https://3dprintingspace.com/t/deveations-along-the-y-axis/2985 "2021-09-04T13:18:19Z")
Hello guys, I’m printing with a CR 10 S Pro v2 and I ran into a slight problem, involving lining up the length-axis of my object. If I line it up along the X-axis, the print devellops deviations of the printed layers.… --- ## [Ender 5 Pro X-axis stuck](https://3dprintingspace.com/t/ender-5-pro-x-axis-stuck/2853)
**Author:** [@GlennW](https://3dprintingspace.com/u/GlennW)\ **Replies:** 12\ **Last updated:** [July 31, 2021, 1:15pm UTC](https://3dprintingspace.com/t/ender-5-pro-x-axis-stuck/2853 "2021-07-31T13:15:22Z")
Hello, I have not been able to use my ender 5 Pro for sometime because I have yet been able to figure out what is wrong with it. My x-axis seems to be sticking. As in it can’t even be moved by hand sometimes. I have re… --- ## [Newest Printer - Elegoo Neptune 2](https://3dprintingspace.com/t/newest-printer-elegoo-neptune-2/2717)
**Author:** [@msteele999](https://3dprintingspace.com/u/msteele999)\ **Replies:** 0\ **Last updated:** [June 19, 2021, 8:57pm UTC](https://3dprintingspace.com/t/newest-printer-elegoo-neptune-2/2717 "2021-06-19T20:57:15Z")
I recently added a new printer to my fleet, an Elegoo Neptune 2. I had heard a lot of good things about the printer and I was not disappointed! Assembly took about 20-30 minutes, and with the exception of the base of t… --- ## [Ender 3 Pro Problem](https://3dprintingspace.com/t/ender-3-pro-problem/2647)
**Author:** [@RobertNotBob](https://3dprintingspace.com/u/RobertNotBob)\ **Replies:** 9\ **Last updated:** [June 9, 2021, 5:48pm UTC](https://3dprintingspace.com/t/ender-3-pro-problem/2647 "2021-06-09T17:48:06Z")
Wife bought me a Ender 3 Pro to start my interest in this hobby. Fully assembled thanks to the video from 3D Printing Canada. All checked out but problems with the Auto Home which is not working. Been told by my local … --- ## [New Biqu B2 printer comming?](https://3dprintingspace.com/t/new-biqu-b2-printer-comming/2462)
**Author:** [@Glenn](https://3dprintingspace.com/u/Glenn)\ **Replies:** 3\ **Last updated:** [June 8, 2021, 10:22pm UTC](https://3dprintingspace.com/t/new-biqu-b2-printer-comming/2462 "2021-06-08T22:22:01Z")
Posted in the BTT git hub must be a new printer coming says it’s 2 in 1 out there is firmware but nothing else for it there so far --- ## [Shattered Glass](https://3dprintingspace.com/t/shattered-glass/2554)
**Author:** [@LEGOManiac](https://3dprintingspace.com/u/LEGOManiac)\ **Replies:** 10\ **Last updated:** [June 3, 2021, 1:42pm UTC](https://3dprintingspace.com/t/shattered-glass/2554 "2021-06-03T13:42:48Z")
Has anyone ever had a glass bed just shatter in place? I’ve been printing on this piece for months and, in fact, the model I’m printing is still sitting in the middle, still printing, yet the glass all around it shattere… --- ## [5 axis printers](https://3dprintingspace.com/t/5-axis-printers/2598)
**Author:** [@Glenn](https://3dprintingspace.com/u/Glenn)\ **Replies:** 0\ **Last updated:** [June 1, 2021, 11:49pm UTC](https://3dprintingspace.com/t/5-axis-printers/2598 "2021-06-01T23:49:10Z")
with machining to boot. --- ## [Neat SCARA printer article](https://3dprintingspace.com/t/neat-scara-printer-article/2536)
**Author:** [@Dr.Marvin](https://3dprintingspace.com/u/Dr.Marvin)\ **Replies:** 1\ **Last updated:** [May 18, 2021, 11:43pm UTC](https://3dprintingspace.com/t/neat-scara-printer-article/2536 "2021-05-18T23:43:55Z")
Here is an article from all3d about scara printers. Im not rushing out to go build 1, but interesting nonetheless. What non Cartesian printers do you guys own? --- ## [Better FDM 3D printers](https://3dprintingspace.com/t/better-fdm-3d-printers/2478)
**Author:** [@Glenn](https://3dprintingspace.com/u/Glenn)\ **Replies:** 18\ **Last updated:** [May 18, 2021, 8:21pm UTC](https://3dprintingspace.com/t/better-fdm-3d-printers/2478 "2021-05-18T20:21:56Z")
So 3D printing was not really a hobby I wanted to get into. I needed parts for things I was making out of steel, aluminum stainless, and brass. It’s gotten busier and it was getting too expensive sending out for aluminum… --- ## [3d Printed glass](https://3dprintingspace.com/t/3d-printed-glass/2519)
**Author:** [@Glenn](https://3dprintingspace.com/u/Glenn)\ **Replies:** 1\ **Last updated:** [May 14, 2021, 1:50pm UTC](https://3dprintingspace.com/t/3d-printed-glass/2519 "2021-05-14T13:50:16Z")
https://www.liosdesign.com/film --- ## [Ender 5 Pro Limit Switch](https://3dprintingspace.com/t/ender-5-pro-limit-switch/2508)
**Author:** [@GlennW](https://3dprintingspace.com/u/GlennW)\ **Replies:** 7\ **Last updated:** [May 13, 2021, 7:33pm UTC](https://3dprintingspace.com/t/ender-5-pro-limit-switch/2508 "2021-05-13T19:33:44Z")
Hello, My ender 5 Pro seems to need its limit switch adjusted for whatever reason. The Bed is crashing into the filament tip head. I can see the limit switch is not yet engaged and when I try to set an auto home to comp… --- ## [Multi color printing on the Ender 3 V2](https://3dprintingspace.com/t/multi-color-printing-on-the-ender-3-v2/2379)
**Author:** [@Geff](https://3dprintingspace.com/u/Geff)\ **Replies:** 9\ **Last updated:** [May 12, 2021, 2:03pm UTC](https://3dprintingspace.com/t/multi-color-printing-on-the-ender-3-v2/2379 "2021-05-12T14:03:58Z")
Please help. Has anyone successfully printed different color layers on an Ender 3 V2? I am using PrusaSlicer and according to PrusaSlicer I am doing everything right but the Ender 3 V2 merrily prints the whole thing in … --- ## [CreatWit K6 to make future letter signs, 3d printer extruder](https://3dprintingspace.com/t/creatwit-k6-to-make-future-letter-signs-3d-printer-extruder/2498)
**Author:** [@ankeryand](https://3dprintingspace.com/u/ankeryand)\ **Replies:** 0\ **Last updated:** [May 11, 2021, 1:34am UTC](https://3dprintingspace.com/t/creatwit-k6-to-make-future-letter-signs-3d-printer-extruder/2498 "2021-05-11T01:34:51Z")
To make future letter signages, you may need this machine CreatWit K6, slant returns, dual colors, automatically levelling, little space, no need worker… more advantages is coming to find… --- ## [Tiny, high quality 3dprinters?](https://3dprintingspace.com/t/tiny-high-quality-3dprinters/1735)
**Author:** [@TriPunk](https://3dprintingspace.com/u/TriPunk)\ **Replies:** 6\ **Last updated:** [May 6, 2021, 9:41pm UTC](https://3dprintingspace.com/t/tiny-high-quality-3dprinters/1735 "2021-05-06T21:41:08Z")
I’m looking to get a very small 3d printer to sit next to me at my desk and keep me company. I already have a CR10s Pro that is fantastic and does a great job, however sometimes if I’m printing just a small part or just … --- ## [Creality CR-20 Pro - Filament sensor or not?](https://3dprintingspace.com/t/creality-cr-20-pro-filament-sensor-or-not/2258)
**Author:** [@Calab](https://3dprintingspace.com/u/Calab)\ **Replies:** 2\ **Last updated:** [April 9, 2021, 11:19pm UTC](https://3dprintingspace.com/t/creality-cr-20-pro-filament-sensor-or-not/2258 "2021-04-09T23:19:44Z")
I recently purchased a Creality CR-20 Pro printer and have a question… Does this machine have a Filament sensor or not? I don’t see one, but I’m a n00b so I’m not sure what I’m looking for. I don’t want to be have way … --- ## [Delta printers?](https://3dprintingspace.com/t/delta-printers/1797)
**Author:** [@TLW3D](https://3dprintingspace.com/u/TLW3D)\ **Replies:** 19\ **Last updated:** [March 24, 2021, 6:29am UTC](https://3dprintingspace.com/t/delta-printers/1797 "2021-03-24T06:29:16Z")
What’s the consensus on these types of units? Might be able to get one that needs attention fairly cheap. --- ## [Please help me fixing this problem](https://3dprintingspace.com/t/please-help-me-fixing-this-problem/2034)
**Author:** [@Tonyverde](https://3dprintingspace.com/u/Tonyverde)\ **Replies:** 6\ **Last updated:** [March 14, 2021, 6:53pm UTC](https://3dprintingspace.com/t/please-help-me-fixing-this-problem/2034 "2021-03-14T18:53:24Z")
Anybody can help me fix this problem I am new on the hobby Thanks [Previous page](https://3dprintingspace.com/c/3d-printers/53.md) [Next page](https://3dprintingspace.com/c/3d-printers/53.md?page=2)