{"users":[{"id":4,"username":"Keith","avatar_template":"/user_avatar/3dprintingspace.com/keith/{size}/92_2.png","trust_level":3},{"id":2938,"username":"jacobhenn","avatar_template":"/letter_avatar_proxy/v4/letter/j/57b2e6/{size}.png","trust_level":2},{"id":800,"username":"HobbyMaker3D","avatar_template":"/letter_avatar_proxy/v4/letter/h/bb73d2/{size}.png","trust_level":2},{"id":618,"username":"kitedemon","avatar_template":"/letter_avatar_proxy/v4/letter/k/ecae2f/{size}.png","moderator":true,"trust_level":4},{"id":1695,"username":"Tempus_3D_Printing","avatar_template":"/user_avatar/3dprintingspace.com/tempus_3d_printing/{size}/5490_2.png","trust_level":2},{"id":2397,"username":"rsterne","avatar_template":"/user_avatar/3dprintingspace.com/rsterne/{size}/8046_2.png","trust_level":2},{"id":778,"username":"Blair","avatar_template":"/user_avatar/3dprintingspace.com/blair/{size}/964_2.png","trust_level":2},{"id":1845,"username":"mocotonio","avatar_template":"/user_avatar/3dprintingspace.com/mocotonio/{size}/6308_2.png","trust_level":2},{"id":304,"username":"Yarkspiri","avatar_template":"/user_avatar/3dprintingspace.com/yarkspiri/{size}/234_2.png","trust_level":2},{"id":2004,"username":"Matthew","avatar_template":"/user_avatar/3dprintingspace.com/matthew/{size}/7552_2.png","moderator":true,"trust_level":2},{"id":1808,"username":"Blenky","avatar_template":"/letter_avatar_proxy/v4/letter/b/bc79bd/{size}.png","trust_level":2},{"id":1346,"username":"mykepredko","avatar_template":"/user_avatar/3dprintingspace.com/mykepredko/{size}/4027_2.png","trust_level":4},{"id":2015,"username":"Saad.alikhan","avatar_template":"/letter_avatar_proxy/v4/letter/s/a87d85/{size}.png","trust_level":2},{"id":1233,"username":"Arnaldo","avatar_template":"/user_avatar/3dprintingspace.com/arnaldo/{size}/3544_2.png","trust_level":2},{"id":1248,"username":"dbar3d","avatar_template":"/letter_avatar_proxy/v4/letter/d/ea666f/{size}.png","trust_level":2},{"id":1491,"username":"milesstone","avatar_template":"/letter_avatar_proxy/v4/letter/m/d78d45/{size}.png","trust_level":2},{"id":1941,"username":"sporky","avatar_template":"/letter_avatar_proxy/v4/letter/s/94ad74/{size}.png","trust_level":2},{"id":1846,"username":"antsriondel","avatar_template":"/letter_avatar_proxy/v4/letter/a/76d3ee/{size}.png","trust_level":2},{"id":1803,"username":"howtouse3dprint.com","avatar_template":"/letter_avatar_proxy/v4/letter/h/e79b87/{size}.png","trust_level":2},{"id":8,"username":"Jason","avatar_template":"/user_avatar/3dprintingspace.com/jason/{size}/6148_2.png","admin":true,"trust_level":4},{"id":454,"username":"mobiobi","avatar_template":"/user_avatar/3dprintingspace.com/mobiobi/{size}/7960_2.png","trust_level":2},{"id":192,"username":"LEGOManiac","avatar_template":"/letter_avatar_proxy/v4/letter/l/ba8739/{size}.png","moderator":true,"trust_level":2},{"id":1457,"username":"apollo","avatar_template":"/letter_avatar_proxy/v4/letter/a/41988e/{size}.png","trust_level":2},{"id":1646,"username":"Sam","avatar_template":"/letter_avatar_proxy/v4/letter/s/5f9b8f/{size}.png","moderator":true,"trust_level":4},{"id":715,"username":"3DMultiMaker","avatar_template":"/user_avatar/3dprintingspace.com/3dmultimaker/{size}/1037_2.png","trust_level":2},{"id":443,"username":"VagabondElf","avatar_template":"/user_avatar/3dprintingspace.com/vagabondelf/{size}/4936_2.png","trust_level":2},{"id":580,"username":"Ted","avatar_template":"/letter_avatar_proxy/v4/letter/t/db5fbb/{size}.png","trust_level":2},{"id":291,"username":"eeffoc","avatar_template":"/user_avatar/3dprintingspace.com/eeffoc/{size}/233_2.png","trust_level":2},{"id":317,"username":"Buck1793","avatar_template":"/letter_avatar_proxy/v4/letter/b/8e8cbc/{size}.png","trust_level":2},{"id":1089,"username":"Mr.Croquet","avatar_template":"/letter_avatar_proxy/v4/letter/m/7feea3/{size}.png","trust_level":2},{"id":1098,"username":"Albergman","avatar_template":"/user_avatar/3dprintingspace.com/albergman/{size}/2308_2.png","trust_level":2},{"id":784,"username":"SpaceMoose","avatar_template":"/user_avatar/3dprintingspace.com/spacemoose/{size}/951_2.png","trust_level":2},{"id":188,"username":"bd43","avatar_template":"/letter_avatar_proxy/v4/letter/b/d26b3c/{size}.png","trust_level":2},{"id":361,"username":"Glenn","avatar_template":"/user_avatar/3dprintingspace.com/glenn/{size}/728_2.png","moderator":true,"trust_level":4},{"id":1139,"username":"JSmith92","avatar_template":"/letter_avatar_proxy/v4/letter/j/f07891/{size}.png","trust_level":2},{"id":47,"username":"TurkeyOnRye","avatar_template":"/user_avatar/3dprintingspace.com/turkeyonrye/{size}/1788_2.png","trust_level":2},{"id":125,"username":"LGSGreybeard","avatar_template":"/user_avatar/3dprintingspace.com/lgsgreybeard/{size}/1295_2.png","trust_level":2},{"id":507,"username":"Amiro62","avatar_template":"/user_avatar/3dprintingspace.com/amiro62/{size}/732_2.png","trust_level":2},{"id":249,"username":"Dr.Marvin","avatar_template":"/user_avatar/3dprintingspace.com/dr.marvin/{size}/195_2.png","trust_level":2},{"id":3,"username":"tony","avatar_template":"/user_avatar/3dprintingspace.com/tony/{size}/218_2.png","trust_level":4},{"id":561,"username":"new2print","avatar_template":"/letter_avatar_proxy/v4/letter/n/f14d63/{size}.png","trust_level":2},{"id":189,"username":"codyp","avatar_template":"/letter_avatar_proxy/v4/letter/c/ad7895/{size}.png","trust_level":2},{"id":883,"username":"Jan","avatar_template":"/letter_avatar_proxy/v4/letter/j/ce7236/{size}.png","trust_level":2},{"id":2,"username":"chris","avatar_template":"/user_avatar/3dprintingspace.com/chris/{size}/1090_2.png","admin":true,"trust_level":4},{"id":416,"username":"Red-Nick","avatar_template":"/letter_avatar_proxy/v4/letter/r/90db22/{size}.png","trust_level":2},{"id":526,"username":"Newguy","avatar_template":"/letter_avatar_proxy/v4/letter/n/c67d28/{size}.png","trust_level":2},{"id":49,"username":"Benchy","avatar_template":"/user_avatar/3dprintingspace.com/benchy/{size}/323_2.png","trust_level":2},{"id":831,"username":"andr3w","avatar_template":"/letter_avatar_proxy/v4/letter/a/7cd45c/{size}.png","trust_level":2},{"id":241,"username":"CaptainSky","avatar_template":"/user_avatar/3dprintingspace.com/captainsky/{size}/166_2.png","trust_level":2},{"id":56,"username":"frozenrc","avatar_template":"/user_avatar/3dprintingspace.com/frozenrc/{size}/149_2.png","trust_level":2},{"id":175,"username":"gerritv","avatar_template":"/letter_avatar_proxy/v4/letter/g/e495f1/{size}.png","trust_level":2},{"id":148,"username":"daffod","avatar_template":"/letter_avatar_proxy/v4/letter/d/9de053/{size}.png","trust_level":2},{"id":343,"username":"PJprincefpv","avatar_template":"/user_avatar/3dprintingspace.com/pjprincefpv/{size}/262_2.png","trust_level":2}],"primary_groups":[],"flair_groups":[],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/3ddesign/9?page=1","per_page":30,"topics":[{"fancy_title":"About the 3D Design category","id":23,"title":"About the 3D Design category","slug":"about-the-3d-design-category","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2021-01-25T21:47:02.365Z","last_posted_at":null,"bumped":true,"bumped_at":"2021-02-03T21:30:29.552Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"Use this branch of the forum to talk about all 3D design related topics! \nHaving a design problem? \nCannot figure out how to get an offset plane to wrap helically around an axis? \nAsk it here and the community will help …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":603,"like_count":1,"has_summary":false,"last_poster_username":"Keith","category_id":9,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Can I print this?","id":9807,"title":"Can I print this?","slug":"can-i-print-this","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":"https://storage.3dprintingspace.com/optimized/2X/8/8e5bcb7f58ec8f6ea572e16ba6facfc401637ec2_2_1024x888.jpeg","created_at":"2025-01-14T20:01:01.895Z","last_posted_at":"2025-01-15T11:09:32.437Z","bumped":true,"bumped_at":"2025-01-15T11:09:32.437Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi guys, I am new to 3D printing, and I was wondering if I would even be able to 3D print something like this? As you can see, there is no flat side to print on, so I was wondering if the 3D printers I have access to can…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":105,"like_count":2,"has_summary":false,"last_poster_username":"kitedemon","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2938,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":800,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"3D printed Orthotics","id":8711,"title":"3D printed Orthotics","slug":"3d-printed-orthotics","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/2/27cf12d92de6096bd588dadfe7c158997080f6ff_2_1024x682.jpeg","created_at":"2024-06-19T19:19:58.101Z","last_posted_at":"2024-06-19T19:19:58.265Z","bumped":true,"bumped_at":"2024-06-19T19:19:58.265Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"We would like to share some of the amazing 3D printed orthotics builds we have been doing for local customers. With 3D scanning and special software, they are able to get some pretty amazing results! \n  \nHere is a post w…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":86,"like_count":0,"has_summary":false,"last_poster_username":"Tempus_3D_Printing","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1695,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Printing a Bridge Between Holes","id":8024,"title":"Printing a Bridge Between Holes","slug":"printing-a-bridge-between-holes","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":"https://storage.3dprintingspace.com/original/2X/8/8c0527a60d8767dfbb655c5f1bca2102ab000439.png","created_at":"2024-03-15T01:29:16.780Z","last_posted_at":"2024-03-22T02:03:52.429Z","bumped":true,"bumped_at":"2024-03-22T02:03:52.429Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Here is a little trick I came up with for causing a bridge above a shouldered hole, where the diameter steps down and the OD of the new wall is smaller than the ID of the larger hole, so there would be no support for the…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":168,"like_count":0,"has_summary":false,"last_poster_username":"mocotonio","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2397,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":778,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1845,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Modeling Advance Supports for Production Workflow - Resin","id":5651,"title":"Modeling Advance Supports for Production Workflow - Resin","slug":"modeling-advance-supports-for-production-workflow-resin","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":"https://storage.3dprintingspace.com/optimized/2X/3/3bc6d204ca811e12d7d938168ffca221970ebc4d_2_1024x576.jpeg","created_at":"2023-05-10T08:43:10.457Z","last_posted_at":"2023-05-10T21:54:30.570Z","bumped":true,"bumped_at":"2023-05-10T21:54:30.570Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":261,"like_count":3,"has_summary":false,"last_poster_username":"Yarkspiri","category_id":9,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":304,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Awesome Threaded Insert Tool","id":5465,"title":"Awesome Threaded Insert Tool","slug":"awesome-threaded-insert-tool","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":"https://storage.3dprintingspace.com/original/2X/8/85dd5f06e9039dc712b77c7437efedde7c23e9e2.jpeg","created_at":"2023-03-29T16:08:28.636Z","last_posted_at":"2023-03-29T19:30:15.691Z","bumped":true,"bumped_at":"2023-03-29T22:56:10.044Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I found this video and built the tool as DIY Engineering recommended.  It works fantastic and so simple to make.  I had to make some minor mods to the 3D printed handle to fit my soldering iron and that was it. \nI am pro…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":928,"like_count":1,"has_summary":false,"last_poster_username":"Blenky","category_id":9,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1808,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"My Journey into the World of 3D Design","id":5406,"title":"My Journey into the World of 3D Design","slug":"my-journey-into-the-world-of-3d-design","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2023-03-17T12:26:36.088Z","last_posted_at":"2023-03-17T12:26:36.144Z","bumped":true,"bumped_at":"2023-03-17T12:26:36.144Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"As someone who has always been interested in art and technology, 3D design has been a natural fit for me. Over the past year, I’ve been exploring various 3D design software programs and techniques, and I have been absolu…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":418,"like_count":0,"has_summary":false,"last_poster_username":"Saad.alikhan","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2015,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Software for design for iPad?","id":3155,"title":"Software for design for iPad?","slug":"software-for-design-for-ipad","posts_count":5,"reply_count":0,"highest_post_number":5,"image_url":null,"created_at":"2021-10-15T22:09:45.416Z","last_posted_at":"2023-02-02T03:58:24.600Z","bumped":true,"bumped_at":"2023-02-02T03:58:24.600Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Does anyone know if there is a design software for iPad that can be use to print to 3D printer? \nI just ordered my first 3D printer and starting to do research to learn. \nThanks in advance","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":532,"like_count":0,"has_summary":false,"last_poster_username":"sporky","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1233,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1248,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1491,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1941,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"What are the best, useful 3d prints out there","id":5067,"title":"What are the best, useful 3d prints out there","slug":"what-are-the-best-useful-3d-prints-out-there","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2023-01-18T02:21:27.847Z","last_posted_at":"2023-01-18T08:48:14.568Z","bumped":true,"bumped_at":"2023-01-18T08:48:14.568Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Feel free to post all 3d prints you find to be the best, or the most useful, you know of.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":435,"like_count":1,"has_summary":false,"last_poster_username":"howtouse3dprint.com","category_id":9,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1846,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1803,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Design Tricks for Multi Jet Fusion 3D Printing (Powder bed / industrial)","id":5055,"title":"Design Tricks for Multi Jet Fusion 3D Printing (Powder bed / industrial)","slug":"design-tricks-for-multi-jet-fusion-3d-printing-powder-bed-industrial","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2023-01-14T18:08:32.560Z","last_posted_at":"2023-01-16T15:57:58.279Z","bumped":true,"bumped_at":"2023-01-16T15:57:58.279Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"For people who are interested in learning about industrial 3D printing, we would like to share some design guidelines to help you get the most out of 3D printing with HP Multi Jet Fusion powder-bed 3D printing technology…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":296,"like_count":1,"has_summary":false,"last_poster_username":"Jason","category_id":9,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1695,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"My Fan Showdown Entry","id":3369,"title":"My Fan Showdown Entry","slug":"my-fan-showdown-entry","posts_count":7,"reply_count":0,"highest_post_number":7,"image_url":"https://storage.3dprintingspace.com/optimized/2X/2/2142228bc006652257fa991b7648963931758cd2_2_1024x576.jpeg","created_at":"2021-12-13T04:24:50.861Z","last_posted_at":"2022-10-16T18:10:01.705Z","bumped":true,"bumped_at":"2022-10-16T18:10:01.705Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Any of you other nerds see my fan design performing on YouTube?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1292,"like_count":8,"has_summary":false,"last_poster_username":"apollo","category_id":9,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":454,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":192,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1457,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Filament used as a functional element","id":4555,"title":"Filament used as a functional element","slug":"filament-used-as-a-functional-element","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":"https://storage.3dprintingspace.com/optimized/2X/b/bfb73ff4d3ae007370c4af7d186589945643e651_2_1023x754.jpeg","created_at":"2022-09-06T04:15:04.428Z","last_posted_at":"2022-09-07T04:06:32.346Z","bumped":true,"bumped_at":"2022-09-07T04:06:32.346Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve seen filament used as hing pins, here’s my use as push/pull cables on Printables. Does anyone have any other ideas?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":293,"like_count":0,"has_summary":false,"last_poster_username":"mobiobi","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":454,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1646,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":715,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":443,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Great Freecad Tutotials!","id":3400,"title":"Great Freecad Tutotials!","slug":"great-freecad-tutotials","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2021-12-26T17:21:52.277Z","last_posted_at":"2021-12-26T17:21:52.738Z","bumped":true,"bumped_at":"2021-12-26T17:21:52.738Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Just thought I’d spead the word on a super duper series of freecad videos. \nMangoJelly Sulutions on the YouTube.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":426,"like_count":3,"has_summary":false,"last_poster_username":"Ted","category_id":9,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":580,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Need help designing","id":3275,"title":"Need help designing","slug":"need-help-designing","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":"https://storage.3dprintingspace.com/optimized/2X/9/9168c60ed2fffe856bfdd918cd1107d40006b921_2_768x1024.jpeg","created_at":"2021-11-13T14:46:16.952Z","last_posted_at":"2021-11-19T20:22:53.886Z","bumped":true,"bumped_at":"2021-11-19T20:22:53.886Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve been asked by my church if I could 3D print a replacement letter for its sign. I said sure why not I’ll give it a try but now I’m stuck. \nI’m not sure how to approach recreating this letter I’m not very good with 3D…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":571,"like_count":11,"has_summary":false,"last_poster_username":"Buck1793","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":291,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":454,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":317,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Slicer settings for a horizontal cylinder","id":2749,"title":"Slicer settings for a horizontal cylinder","slug":"slicer-settings-for-a-horizontal-cylinder","posts_count":21,"reply_count":9,"highest_post_number":21,"image_url":null,"created_at":"2021-06-30T09:35:32.108Z","last_posted_at":"2021-08-03T12:58:26.794Z","bumped":true,"bumped_at":"2021-08-03T12:58:26.794Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m printing a cylinder 16mm diameter and about 3 inches long. For strength, it needs to be printed horizontally. I’ve been working with PLA+ but anything stronger is also open to consider. The problem with the print is …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":10551,"like_count":3,"has_summary":false,"last_poster_username":"kitedemon","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1089,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1098,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":192,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Meshmixer STL editing","id":2768,"title":"Meshmixer STL editing","slug":"meshmixer-stl-editing","posts_count":11,"reply_count":6,"highest_post_number":11,"image_url":null,"created_at":"2021-07-05T19:20:36.766Z","last_posted_at":"2021-07-18T20:23:31.930Z","bumped":true,"bumped_at":"2021-07-18T20:23:31.930Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Is anyone familiar with using Meshmixer to edit STLs?  I printed out a side mount bracket for a spool holder and found that the holes for the t-nut insert are too small.  I thought I’d just ream them out with a drill but…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1065,"like_count":11,"has_summary":false,"last_poster_username":"Glenn","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":784,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":188,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":361,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Slicing Error (Blender)","id":2680,"title":"Slicing Error (Blender)","slug":"slicing-error-blender","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":"https://storage.3dprintingspace.com/optimized/2X/a/ae0e87ceff460d26462ab1de601fe569973dde0b_2_775x1024.jpeg","created_at":"2021-06-12T15:00:39.094Z","last_posted_at":"2021-06-12T17:49:18.686Z","bumped":true,"bumped_at":"2021-06-12T17:49:18.686Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"So I am the most beginner of beginner for actually designing my own 3d models. I’ve watched a bunch of tutorials and landed on using Blender. I wanted to make a little juice box as a test and it seemed to work out well, …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":633,"like_count":3,"has_summary":false,"last_poster_username":"kitedemon","category_id":9,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1139,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":47,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"openSCAD Techniques, Tricks, and Hacks","id":1482,"title":"openSCAD Techniques, Tricks, and Hacks","slug":"openscad-techniques-tricks-and-hacks","posts_count":9,"reply_count":0,"highest_post_number":9,"image_url":null,"created_at":"2021-02-08T23:34:45.249Z","last_posted_at":"2021-04-03T04:20:20.896Z","bumped":true,"bumped_at":"2021-04-03T04:20:20.896Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve been using openSCAD almost to the exclusion of other design tools, and although it has substantial limitations (something like a c “struct” would be peachy, for instance) its advantages are more than enough to make …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":3057,"like_count":9,"has_summary":false,"last_poster_username":"Dr.Marvin","category_id":9,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":125,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":507,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":192,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":249,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Creating Lethophane","id":1343,"title":"Creating Lethophane","slug":"creating-lethophane","posts_count":42,"reply_count":23,"highest_post_number":42,"image_url":"https://storage.3dprintingspace.com/original/2X/c/c673d77b95b83e2260f4f7495c134702ea991ac4.jpeg","created_at":"2021-02-07T16:53:16.366Z","last_posted_at":"2021-03-26T17:30:43.279Z","bumped":true,"bumped_at":"2021-03-26T17:30:43.279Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I discovered Lithophane to print and has been ask to me in high demand to print. \nIm including some links to help with the process. \nFree Photo Editer to remove back grounds for example and retouch pics \n\nLithophane Link…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":2247,"like_count":32,"has_summary":false,"last_poster_username":"Glenn","category_id":9,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":507,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":561,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":189,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":361,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Raspberry Pi case","id":2170,"title":"Raspberry Pi case","slug":"raspberry-pi-case","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":null,"created_at":"2021-03-25T00:43:16.959Z","last_posted_at":"2021-03-25T16:10:41.961Z","bumped":true,"bumped_at":"2021-03-25T16:10:41.961Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Very new to 3-D printing \nDealing with the possible heat from the raspberry pi,what filament would you use to print the case","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":662,"like_count":1,"has_summary":false,"last_poster_username":"TurkeyOnRye","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":883,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":784,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":192,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":47,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Autodesk Fusion 360 - Thoughts?","id":946,"title":"Autodesk Fusion 360 - Thoughts?","slug":"autodesk-fusion-360-thoughts","posts_count":10,"reply_count":5,"highest_post_number":10,"image_url":"https://storage.3dprintingspace.com/optimized/1X/1a0601134fa7e885f3778d2be9a0874b62387a48_2_1024x576.jpeg","created_at":"2021-02-04T13:06:58.806Z","last_posted_at":"2021-03-05T22:56:45.908Z","bumped":true,"bumped_at":"2021-03-05T22:56:45.908Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"What are your thoughts on Fusion 360? \n  \nMost people enjoy using this software because of its easy to use features and free license for personal use. \nHave you used Fusion 360 in a commercial environment? \nDoes it stand…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":713,"like_count":3,"has_summary":false,"last_poster_username":"Glenn","category_id":9,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":416,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":800,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":526,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":361,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Inches or Millimeters… Go!","id":1499,"title":"Inches or Millimeters... Go!","slug":"inches-or-millimeters-go","posts_count":36,"reply_count":10,"highest_post_number":36,"image_url":"https://storage.3dprintingspace.com/original/1X/734d91f27803233b127e4d065025de154abec792.jpeg","created_at":"2021-02-09T20:46:13.818Z","last_posted_at":"2021-03-03T21:08:12.442Z","bumped":true,"bumped_at":"2021-03-03T21:08:12.442Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I like to design all my work in inches! A lot of companies I deal with prefer inches. What do you think?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1795,"like_count":71,"has_summary":false,"last_poster_username":"Glenn","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":800,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":49,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":361,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"What have you designed","id":1100,"title":"What have you designed","slug":"what-have-you-designed","posts_count":33,"reply_count":12,"highest_post_number":33,"image_url":null,"created_at":"2021-02-04T21:11:55.640Z","last_posted_at":"2021-03-02T13:07:00.959Z","bumped":true,"bumped_at":"2021-03-02T13:07:00.959Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"What are some items that you have thought of and designed to be 3D printed? \nWas it a prototype that had many iterations or a toy that you just had to have? \nLet’s share our creativity and discus our methods of putting i…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1130,"like_count":20,"has_summary":false,"last_poster_username":"kitedemon","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":416,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":361,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":454,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":291,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Blender sculpting","id":1745,"title":"Blender sculpting","slug":"blender-sculpting","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":"https://storage.3dprintingspace.com/optimized/2X/e/e5ee204706b4f243898530734e5f8b81feae49b2_2_1024x576.jpeg","created_at":"2021-02-20T17:39:29.452Z","last_posted_at":"2021-02-23T02:37:22.825Z","bumped":true,"bumped_at":"2021-02-23T02:37:22.825Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Here is my first blender sculpting efforts. Never used blender until weds. \nI’ve been at it for 2 days now off and on. \nFeed back? Constructive criticism? \n  \nThis was my first,  just playing around with the tools, figur…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":581,"like_count":3,"has_summary":false,"last_poster_username":"Benchy","category_id":9,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":49,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":361,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":831,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How do I fix an STL for printing","id":1040,"title":"How do I fix an STL for printing","slug":"how-do-i-fix-an-stl-for-printing","posts_count":8,"reply_count":2,"highest_post_number":8,"image_url":"https://storage.3dprintingspace.com/original/1X/9e41dc82bf31bf373b07706d432706c5d163b93e.jpeg","created_at":"2021-02-04T16:55:08.386Z","last_posted_at":"2021-02-22T02:57:20.921Z","bumped":true,"bumped_at":"2021-02-22T02:57:20.921Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"So I got this STL recently and when I import it into MeshMixer it blows up with errors (non-manifold in many parts, etc) \nI printed a scaled down copy of it but it was far from perfect. Any suggestions?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":722,"like_count":3,"has_summary":false,"last_poster_username":"Jason","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":241,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":454,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":56,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":800,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Freecad is…there’s gotta be a better way","id":1139,"title":"Freecad is...there's gotta be a better way","slug":"freecad-is-theres-gotta-be-a-better-way","posts_count":33,"reply_count":14,"highest_post_number":33,"image_url":null,"created_at":"2021-02-05T02:03:39.177Z","last_posted_at":"2021-02-21T01:48:44.497Z","bumped":true,"bumped_at":"2021-02-21T01:48:44.497Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Freecad is frustrating, im new to the whole thing. Very familiar with vector graphics, but having a very hard time wrapping my head around the line segment system and how they join. \nI keep getting basic shapes with 2 co…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":3527,"like_count":38,"has_summary":false,"last_poster_username":"gerritv","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":49,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":580,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":192,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":507,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":175,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"STL Modification","id":1473,"title":"STL Modification","slug":"stl-modification","posts_count":5,"reply_count":0,"highest_post_number":5,"image_url":null,"created_at":"2021-02-08T17:44:18.265Z","last_posted_at":"2021-02-18T14:04:31.682Z","bumped":true,"bumped_at":"2021-02-18T14:04:31.682Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have an stl file and i try to mod in free cad and i keep getting errors. \nAll i am doing is doubling the thickness of part. its 1 MM and i am doing is making it to 2 MM thick.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":650,"like_count":0,"has_summary":false,"last_poster_username":"Amiro62","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":148,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":192,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":361,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":507,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Looking for a FREE 3d cad design software?","id":870,"title":"Looking for a FREE 3d cad design software?","slug":"looking-for-a-free-3d-cad-design-software","posts_count":21,"reply_count":8,"highest_post_number":21,"image_url":null,"created_at":"2021-02-04T00:35:45.260Z","last_posted_at":"2021-02-14T05:12:01.518Z","bumped":true,"bumped_at":"2021-02-14T05:12:01.518Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Many people starting out in 3d CAD design often load up Tinkercad because its a FREE 3d modeling software. You can download Tinkercad here: https://www.tinkercad.com/ \nHave you used Tinkercad? \nWhat is your overall exper…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1604,"like_count":12,"has_summary":false,"last_poster_username":"LEGOManiac","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":454,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":507,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":56,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":192,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Design programs - Which is best?","id":1099,"title":"Design programs - Which is best?","slug":"design-programs-which-is-best","posts_count":15,"reply_count":4,"highest_post_number":15,"image_url":"https://storage.3dprintingspace.com/original/1X/71234c0633dcf237eb96a5e8a5b84bb53ba55541.jpeg","created_at":"2021-02-04T21:07:44.816Z","last_posted_at":"2021-02-12T16:12:47.864Z","bumped":true,"bumped_at":"2021-02-12T16:12:47.864Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Tell us about your experiences with 3D design software! \nFrom Inventor to Solidworks, and Catia to NX. Let us know what you think the best 3D modelling method is!","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":672,"like_count":15,"has_summary":false,"last_poster_username":"Benchy","category_id":9,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":249,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":361,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":49,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"N3 Technologies Inc","id":151,"title":"N3 Technologies Inc","slug":"n3-technologies-inc","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2021-01-29T16:06:03.899Z","last_posted_at":"2021-02-11T02:37:28.723Z","bumped":true,"bumped_at":"2021-02-11T02:37:28.723Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Need design work? Well N3 Technologies Inc. is a company that does just that… and more. \nFrom 3D modelling, to professional technical drawings, to sourcing out parts, N3 Technologies Inc. does it all. The highest quality…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":743,"like_count":2,"has_summary":false,"last_poster_username":"PJprincefpv","category_id":9,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":343,"primary_group_id":null,"flair_group_id":null}]}]}}