# Creality K1 **URL:** https://3dprintingspace.com/c/filament-3d-printer/134-category/134.md [Latest](https://3dprintingspace.com/latest.md) · [Categories](https://3dprintingspace.com/categories.md) --- ## [About the Creality K1 category](https://3dprintingspace.com/t/about-the-creality-k1-category/6560)
**Author:** [@Jason](https://3dprintingspace.com/u/Jason)\ **Replies:** 1\ **Last updated:** [July 21, 2023, 4:40pm UTC](https://3dprintingspace.com/t/about-the-creality-k1-category/6560 "2023-07-21T16:40:21Z")
This Category is dedicated to any issues or problems dedicated to the K1 3D printer. Post up any Hints, Links or tricks you have learned using this printer. If you have a problem, Post it as well and let the community … --- ## [K1 Error E0002 Key 2060 Internal Error](https://3dprintingspace.com/t/k1-error-e0002-key-2060-internal-error/9566)
**Author:** [@HobbyMaker3D](https://3dprintingspace.com/u/HobbyMaker3D)\ **Replies:** 3\ **Last updated:** [November 4, 2024, 7:50pm UTC](https://3dprintingspace.com/t/k1-error-e0002-key-2060-internal-error/9566 "2024-11-04T19:50:54Z")
Just loading new filament and doing print (with calibration) and seems like the machine head was grinding while doing calibration. Got the error message mentioned and Creality says to… Which wire are they talking abo… --- ## [Abnormal nozzle error key 111 unknown exception](https://3dprintingspace.com/t/abnormal-nozzle-error-key-111-unknown-exception/7444)
**Author:** [@CanadianMaple](https://3dprintingspace.com/u/CanadianMaple)\ **Replies:** 9\ **Last updated:** [September 18, 2024, 2:08am UTC](https://3dprintingspace.com/t/abnormal-nozzle-error-key-111-unknown-exception/7444 "2024-09-18T02:08:41Z")
Hi all I bought the new Micro Swiss hot end for my K1 but it only worked great for about 30 seconds before an issue with my nozzle board (connector breaking) triggering “error key 111 unknown exception” (picture 1 &2) … --- ## [Heating Issue Error Message](https://3dprintingspace.com/t/heating-issue-error-message/7511)
**Author:** [@BrandonO](https://3dprintingspace.com/u/BrandonO)\ **Replies:** 6\ **Last updated:** [January 8, 2024, 2:52pm UTC](https://3dprintingspace.com/t/heating-issue-error-message/7511 "2024-01-08T14:52:49Z")
Had just gotten it repaired and replaced hotend and such under 14 warranty…first 2 prints were great, then third would start the print but within seconds the temp would flick around for a few seconds and would stop with … --- ## [Octoeverywhere for K1/K1Max](https://3dprintingspace.com/t/octoeverywhere-for-k1-k1max/7275)
**Author:** [@Davethegearhead](https://3dprintingspace.com/u/Davethegearhead)\ **Replies:** 1\ **Last updated:** [October 23, 2023, 4:08pm UTC](https://3dprintingspace.com/t/octoeverywhere-for-k1-k1max/7275 "2023-10-23T16:08:50Z")
The new Octoeverywhere companion works with the K1/K1max. Just install it on a raspberry pi or equivalent. I put it on spare pi I had but you could could install it on a Pi you are already using for octoprint on a printe… --- ## [Don't Try This At Home 🙈](https://3dprintingspace.com/t/dont-try-this-at-home/6799)
**Author:** [@lauran](https://3dprintingspace.com/u/lauran)\ **Replies:** 0\ **Last updated:** [July 7, 2023, 2:04pm UTC](https://3dprintingspace.com/t/dont-try-this-at-home/6799 "2023-07-07T14:04:40Z")
So, my husband and I were printing with the K1 last night, and he freed the bowden tube from the cable harness to give the filament a bit of a better path to travel. This was his first time printing with the lid on the … --- ## [New Video posted for the K1](https://3dprintingspace.com/t/new-video-posted-for-the-k1/6566)
**Author:** [@Jason](https://3dprintingspace.com/u/Jason)\ **Replies:** 0\ **Last updated:** [June 7, 2023, 3:03pm UTC](https://3dprintingspace.com/t/new-video-posted-for-the-k1/6566 "2023-06-07T15:03:55Z")