{"users":[{"id":618,"username":"kitedemon","avatar_template":"/letter_avatar_proxy/v4/letter/k/ecae2f/{size}.png","moderator":true,"trust_level":4},{"id":361,"username":"Glenn","avatar_template":"/user_avatar/3dprintingspace.com/glenn/{size}/728_2.png","moderator":true,"trust_level":4},{"id":192,"username":"LEGOManiac","avatar_template":"/letter_avatar_proxy/v4/letter/l/ba8739/{size}.png","moderator":true,"trust_level":2},{"id":3382,"username":"zachiedoo","avatar_template":"/letter_avatar_proxy/v4/letter/z/f05b48/{size}.png","trust_level":2},{"id":4,"username":"Keith","avatar_template":"/user_avatar/3dprintingspace.com/keith/{size}/92_2.png","trust_level":3},{"id":8,"username":"Jason","avatar_template":"/user_avatar/3dprintingspace.com/jason/{size}/6148_2.png","admin":true,"trust_level":4},{"id":1218,"username":"lauran","avatar_template":"/user_avatar/3dprintingspace.com/lauran/{size}/4205_2.png","moderator":true,"trust_level":4},{"id":1956,"username":"glai","avatar_template":"/letter_avatar_proxy/v4/letter/g/6de8d8/{size}.png","trust_level":2},{"id":2737,"username":"3DP","avatar_template":"/letter_avatar_proxy/v4/letter/3/848f3c/{size}.png","trust_level":2},{"id":3,"username":"tony","avatar_template":"/user_avatar/3dprintingspace.com/tony/{size}/218_2.png","trust_level":4},{"id":818,"username":"jkdone","avatar_template":"/letter_avatar_proxy/v4/letter/j/b5e925/{size}.png","trust_level":2},{"id":130,"username":"Just_a_nerd","avatar_template":"/letter_avatar_proxy/v4/letter/j/9de053/{size}.png","trust_level":3},{"id":877,"username":"AlisonD","avatar_template":"/letter_avatar_proxy/v4/letter/a/c77e96/{size}.png","trust_level":2},{"id":983,"username":"Alaingg","avatar_template":"/letter_avatar_proxy/v4/letter/a/f6c823/{size}.png","trust_level":2},{"id":3343,"username":"JPPaq","avatar_template":"/letter_avatar_proxy/v4/letter/j/f04885/{size}.png","trust_level":2},{"id":1245,"username":"Loosenut","avatar_template":"/user_avatar/3dprintingspace.com/loosenut/{size}/3612_2.png","moderator":true,"trust_level":4},{"id":3123,"username":"JohnInWaterdown","avatar_template":"/letter_avatar_proxy/v4/letter/j/41988e/{size}.png","trust_level":2},{"id":2,"username":"chris","avatar_template":"/user_avatar/3dprintingspace.com/chris/{size}/1090_2.png","admin":true,"trust_level":4},{"id":3375,"username":"wirycrank74","avatar_template":"/letter_avatar_proxy/v4/letter/w/13edae/{size}.png","trust_level":2},{"id":3349,"username":"BrassKettle","avatar_template":"/user_avatar/3dprintingspace.com/brasskettle/{size}/10664_2.png","trust_level":2},{"id":3330,"username":"gregmcd5340","avatar_template":"/letter_avatar_proxy/v4/letter/g/a183cd/{size}.png","trust_level":2},{"id":3381,"username":"davidjin","avatar_template":"/letter_avatar_proxy/v4/letter/d/dec6dc/{size}.png","trust_level":2},{"id":2242,"username":"juansa","avatar_template":"/letter_avatar_proxy/v4/letter/j/8e8cbc/{size}.png","trust_level":2},{"id":1346,"username":"mykepredko","avatar_template":"/user_avatar/3dprintingspace.com/mykepredko/{size}/4027_2.png","trust_level":4},{"id":800,"username":"HobbyMaker3D","avatar_template":"/letter_avatar_proxy/v4/letter/h/bb73d2/{size}.png","trust_level":2},{"id":2202,"username":"chrisclw","avatar_template":"/letter_avatar_proxy/v4/letter/c/c0e974/{size}.png","trust_level":2},{"id":3214,"username":"3D_nerd","avatar_template":"/letter_avatar_proxy/v4/letter/3/41988e/{size}.png","trust_level":2},{"id":3166,"username":"Burger","avatar_template":"/letter_avatar_proxy/v4/letter/b/96bed5/{size}.png","trust_level":2},{"id":3197,"username":"Bullwinkle","avatar_template":"/letter_avatar_proxy/v4/letter/b/8491ac/{size}.png","trust_level":2},{"id":3327,"username":"Perliyn","avatar_template":"/letter_avatar_proxy/v4/letter/p/ee59a6/{size}.png","trust_level":2},{"id":2065,"username":"Hynes555","avatar_template":"/letter_avatar_proxy/v4/letter/h/5f8ce5/{size}.png","trust_level":2},{"id":2004,"username":"Matthew","avatar_template":"/user_avatar/3dprintingspace.com/matthew/{size}/7552_2.png","moderator":true,"trust_level":2},{"id":3323,"username":"redman684","avatar_template":"/letter_avatar_proxy/v4/letter/r/e0b2c6/{size}.png","trust_level":2},{"id":3307,"username":"aussieinkguy","avatar_template":"/letter_avatar_proxy/v4/letter/a/a698b9/{size}.png","trust_level":2},{"id":3275,"username":"nerak","avatar_template":"/letter_avatar_proxy/v4/letter/n/eb9ed0/{size}.png","trust_level":2},{"id":1821,"username":"dkerrivan","avatar_template":"/user_avatar/3dprintingspace.com/dkerrivan/{size}/6279_2.png","trust_level":2},{"id":3276,"username":"dingCor","avatar_template":"/letter_avatar_proxy/v4/letter/d/58f4c7/{size}.png","trust_level":2}],"primary_groups":[],"flair_groups":[],"topic_list":{"can_create_topic":false,"filter":"latest","more_topics_url":"/c/filament-3d-printer/7?page=1","per_page":30,"topics":[{"fancy_title":"Empty spool weights","id":1514,"title":"Empty spool weights","slug":"empty-spool-weights","posts_count":35,"reply_count":10,"highest_post_number":36,"image_url":null,"created_at":"2021-02-10T08:53:21.263Z","last_posted_at":"2026-09-29T11:14:29.702Z","bumped":true,"bumped_at":"2026-09-29T11:14:29.702Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"This is lifted from ‘So you have run out of …’ thread by (@gondolin). \n3D Printing Canada Euro Line Spool: 225g (@Keith ) \n3D Printing Canada NEAT Line Early 2020 Spool: 240g (@Keith ) \n3D Printing Canada Standard Line S…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":10206,"like_count":45,"has_summary":false,"last_poster_username":"kitedemon","category_id":7,"op_like_count":11,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":361,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":192,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":3382,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"If your printer is not listed here - Please Read This","id":1037,"title":"If your printer is not listed here - Please Read This","slug":"if-your-printer-is-not-listed-here-please-read-this","posts_count":51,"reply_count":11,"highest_post_number":52,"image_url":null,"created_at":"2021-02-04T16:52:23.935Z","last_posted_at":"2025-12-03T23:08:41.487Z","bumped":true,"bumped_at":"2025-12-03T23:08:41.487Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"Hi Everyone and thanks for taking the time to visit our Forum. \nAs you all are aware we just started our new 3D Printing Forums. \nWe are trying our best to support all of our customers and appreciate everyone’s contribut…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":2061,"like_count":20,"has_summary":true,"last_poster_username":"Jason","category_id":7,"op_like_count":4,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1218,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1956,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2737,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"About the Filament 3D Printer Technical Help category","id":21,"title":"About the Filament 3D Printer Technical Help category","slug":"about-the-filament-3d-printer-technical-help-category","posts_count":6,"reply_count":0,"highest_post_number":6,"image_url":null,"created_at":"2021-01-25T21:43:50.548Z","last_posted_at":"2021-04-04T18:16:29.481Z","bumped":true,"bumped_at":"2021-04-04T18:16:29.481Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"Post your questions and our community will assist you in resolving your Filament 3d printer technical problems.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":552,"like_count":0,"has_summary":false,"last_poster_username":"Alaingg","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":818,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":130,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":877,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":983,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"3DCA PETG filament separation","id":10457,"title":"3DCA PETG filament separation","slug":"3dca-petg-filament-separation","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":"https://storage.3dprintingspace.com/optimized/2X/5/50feee64a39c5b3f303da74d19ba2ed8870f597c_2_771x1024.jpeg","created_at":"2026-08-20T18:17:42.566Z","last_posted_at":"2026-10-04T22:17:55.578Z","bumped":true,"bumped_at":"2026-10-04T22:17:55.578Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone, \nA 3D newbie here. Why does the PETG filament separate at post print layers or go spaghetti when previous prints hold strong and complete without issues. \nThe filament has been in used 3 days prior to my pro…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":84,"like_count":1,"has_summary":false,"last_poster_username":"JPPaq","category_id":146,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":3343,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":3123,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to Fix Z-Banding on 3D Prints: 7 Fixes for Smooth, Even Layers (Bambu Lab, Ender & Prusa)","id":10447,"title":"How to Fix Z-Banding on 3D Prints: 7 Fixes for Smooth, Even Layers (Bambu Lab, Ender & Prusa)","slug":"how-to-fix-z-banding-on-3d-prints-7-fixes-for-smooth-even-layers-bambu-lab-ender-prusa","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":"https://storage.3dprintingspace.com/optimized/2X/4/4b7550dadb5c6ba2d196ff3472dcbaaa4cc39375_2_1024x682.jpeg","created_at":"2026-07-20T13:20:00.731Z","last_posted_at":"2026-10-04T15:12:51.642Z","bumped":true,"bumped_at":"2026-10-04T15:12:51.642Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\nZ-banding is caused by tiny, repeating variations in how far the Z axis moves between layers, so some layers sit slightly proud or recessed and form horizontal bands. The most reliable fixes are to reliev…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":81,"like_count":0,"has_summary":false,"last_poster_username":"BrassKettle","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":3375,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":3349,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Creality K1 Max wont extrude - NOT Clogged Nozzle","id":10521,"title":"Creality K1 Max wont extrude - NOT Clogged Nozzle","slug":"creality-k1-max-wont-extrude-not-clogged-nozzle","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":null,"created_at":"2026-09-24T16:15:40.727Z","last_posted_at":"2026-09-26T17:28:41.571Z","bumped":true,"bumped_at":"2026-09-26T17:28:41.571Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I was having poor exclusion problems and I had to replace the extruder assembly.  When I removed the old assembly. I found there was a blue tube about three quarters of an inch long between the extruder and the frame in …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":37,"like_count":0,"has_summary":false,"last_poster_username":"gregmcd5340","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":3330,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"The 3D printer is set to 200°C, but the temperature suddenly drops to 0°C when printing begins","id":10519,"title":"The 3D printer is set to 200°C, but the temperature suddenly drops to 0°C when printing begins","slug":"the-3d-printer-is-set-to-200-c-but-the-temperature-suddenly-drops-to-0-c-when-printing-begins","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":null,"created_at":"2026-09-22T20:06:45.813Z","last_posted_at":"2026-09-23T14:38:04.835Z","bumped":true,"bumped_at":"2026-09-23T14:38:04.835Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The issue started when the 1.75mm filament got stuck and snapped inside the guide tube. To remove the broken filament, I used needle-nose pliers to loosen the screw securing the tube to the nozzle assembly and extracted …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":44,"like_count":0,"has_summary":false,"last_poster_username":"davidjin","category_id":159,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":3381,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Printing Letter Issues","id":6788,"title":"Printing Letter Issues","slug":"printing-letter-issues","posts_count":18,"reply_count":9,"highest_post_number":18,"image_url":"https://storage.3dprintingspace.com/optimized/2X/f/fd11c7b7571422d36f256a9af12a61f0c4f91afa_2_1024x768.jpeg","created_at":"2023-07-06T20:21:38.738Z","last_posted_at":"2026-09-22T15:44:30.647Z","bumped":true,"bumped_at":"2026-09-22T15:44:30.647Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone, and thank you in advance for your help! \nI hope that I started this topic in the correct area, if not please let me know! As you can see in the below photo, the printer (Ender 3) works more or less correctly…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":932,"like_count":11,"has_summary":false,"last_poster_username":"3D_nerd","category_id":119,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2242,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":800,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2202,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":3214,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to Fix Sagging Bridges and Poor Bridging: Settings for Clean Overhangs (Bambu Lab, Ender & Prusa)","id":10449,"title":"How to Fix Sagging Bridges and Poor Bridging: Settings for Clean Overhangs (Bambu Lab, Ender & Prusa)","slug":"how-to-fix-sagging-bridges-and-poor-bridging-settings-for-clean-overhangs-bambu-lab-ender-prusa","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://storage.3dprintingspace.com/optimized/2X/3/3db014935f79b1966335e22128f6db76d4b266a3_2_1024x683.jpeg","created_at":"2026-07-21T13:15:22.474Z","last_posted_at":"2026-09-20T14:09:54.575Z","bumped":true,"bumped_at":"2026-09-20T14:09:54.575Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\nSagging bridges are almost always caused by too much heat and not enough cooling for the short time the filament is unsupported. Set your part cooling fan to 100%, drop the nozzle temperature 5-10°C below…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":126,"like_count":0,"has_summary":false,"last_poster_username":"wirycrank74","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":3375,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Need help with print settings for a Cuban chain in PLA silk","id":10323,"title":"Need help with print settings for a Cuban chain in PLA silk","slug":"need-help-with-print-settings-for-a-cuban-chain-in-pla-silk","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2026-01-05T22:12:19.808Z","last_posted_at":"2026-09-15T12:39:38.831Z","bumped":true,"bumped_at":"2026-09-15T12:39:38.831Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m printing this cuban chain in Eryone red/gold PLA silk on my Bambu Lab A1, and I dont know if my settings are reasonable for this or not, can someone help? I’m using Bambu Studio BTW. \nSpeed: \nOuter wall speed: 30mm/s …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":139,"like_count":0,"has_summary":false,"last_poster_username":"Bullwinkle","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3166,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":800,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":3197,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Why Is 3D Printer Filament Brittle and Snapping? 7 Fixes (PLA, PETG & ABS)","id":10448,"title":"Why Is 3D Printer Filament Brittle and Snapping? 7 Fixes (PLA, PETG & ABS)","slug":"why-is-3d-printer-filament-brittle-and-snapping-7-fixes-pla-petg-abs","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":"https://storage.3dprintingspace.com/optimized/2X/d/d8fed0b3924e293118feb730d07b5625a5089e2c_2_1024x573.jpeg","created_at":"2026-07-20T18:12:31.574Z","last_posted_at":"2026-08-05T15:25:43.943Z","bumped":true,"bumped_at":"2026-08-05T15:25:43.943Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\nBrittle filament that snaps easily is almost always caused by moisture absorption, since PLA, PETG, and nylon are all hygroscopic and pull water from the air. UV exposure, temperature swings, tight spool …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":158,"like_count":0,"has_summary":false,"last_poster_username":"Perliyn","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":3327,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ender 5 Pro no display - Anything else to try?","id":5554,"title":"Ender 5 Pro no display - Anything else to try?","slug":"ender-5-pro-no-display-anything-else-to-try","posts_count":24,"reply_count":16,"highest_post_number":24,"image_url":null,"created_at":"2023-04-16T12:10:31.453Z","last_posted_at":"2026-07-26T22:04:32.162Z","bumped":true,"bumped_at":"2026-07-26T22:04:32.162Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone, I have a Ender 5 Pro for a couple of years now. It has been working great until yesterday. I concluded a small print about a week with no issues. I loaded up the printer yesterday and was hit with the no dis…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1202,"like_count":0,"has_summary":false,"last_poster_username":"Loosenut","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2065,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":3323,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to Fix the Z-Seam on 3D Prints: Hide the Vertical Seam Line (Bambu Lab, Orca & Prusa)","id":10446,"title":"How to Fix the Z-Seam on 3D Prints: Hide the Vertical Seam Line (Bambu Lab, Orca & Prusa)","slug":"how-to-fix-the-z-seam-on-3d-prints-hide-the-vertical-seam-line-bambu-lab-orca-prusa","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/4/4b7550dadb5c6ba2d196ff3472dcbaaa4cc39375_2_1024x682.jpeg","created_at":"2026-07-20T12:54:17.693Z","last_posted_at":"2026-07-20T12:54:17.808Z","bumped":true,"bumped_at":"2026-07-20T12:54:17.808Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\nThe Z-seam is the small vertical scar left where every layer starts and stops. You can’t delete it, but you can hide it: set the seam position to Aligned/Back (or paint it onto a hidden edge), enable a sc…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":112,"like_count":0,"has_summary":false,"last_poster_username":"chris","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to Fix ABS Cracking and Layer Separation: 7 Fixes for Strong Prints (Bambu Lab, Ender & Prusa)","id":10443,"title":"How to Fix ABS Cracking and Layer Separation: 7 Fixes for Strong Prints (Bambu Lab, Ender & Prusa)","slug":"how-to-fix-abs-cracking-and-layer-separation-7-fixes-for-strong-prints-bambu-lab-ender-prusa","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/c/c35673ff6904d60da9c5cd6e3bab87d81d437a7c_2_1024x682.jpeg","created_at":"2026-07-12T18:11:39.613Z","last_posted_at":"2026-07-12T18:11:39.719Z","bumped":true,"bumped_at":"2026-07-12T18:11:39.719Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\nABS cracks and splits between layers because the plastic shrinks as it cools, and uneven cooling pulls finished layers apart. The fix is to keep the whole print warm and let it cool slowly: run the printe…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":62,"like_count":0,"has_summary":false,"last_poster_username":"chris","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"TPU Not Feeding or Extruding? How to Fix Flexible Filament Feeding Problems (Bambu Lab, Ender & Prusa)","id":10442,"title":"TPU Not Feeding or Extruding? How to Fix Flexible Filament Feeding Problems (Bambu Lab, Ender & Prusa)","slug":"tpu-not-feeding-or-extruding-how-to-fix-flexible-filament-feeding-problems-bambu-lab-ender-prusa","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/8/81f847bc1345ca46aadf521376918873258e6cc5_2_1024x682.jpeg","created_at":"2026-07-12T16:55:21.661Z","last_posted_at":"2026-07-12T16:55:21.799Z","bumped":true,"bumped_at":"2026-07-12T16:55:21.799Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\nTPU jams and clicks when the soft, elastic filament buckles before it reaches the nozzle instead of feeding through cleanly. The fix is to slow the print speed to roughly 15-30 mm/s, cut retraction to abo…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":93,"like_count":0,"has_summary":false,"last_poster_username":"chris","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to Remove 3D Print Supports That Won’t Come Off (Bambu Lab, Ender & Prusa)","id":10439,"title":"How to Remove 3D Print Supports That Won't Come Off (Bambu Lab, Ender & Prusa)","slug":"how-to-remove-3d-print-supports-that-wont-come-off-bambu-lab-ender-prusa","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/4/4b7550dadb5c6ba2d196ff3472dcbaaa4cc39375_2_1024x682.jpeg","created_at":"2026-07-03T18:11:22.838Z","last_posted_at":"2026-07-03T18:11:22.944Z","bumped":true,"bumped_at":"2026-07-03T18:11:22.944Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\nSupports that won’t release are almost always caused by too small a support Z gap, too many or too dense interface layers, or printing the supports in the same material as the model. Set the top Z distanc…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":139,"like_count":0,"has_summary":false,"last_poster_username":"chris","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to Dry 3D Printer Filament: Temperatures, Times & Methods (Bambu Lab, Ender & Prusa)","id":10438,"title":"How to Dry 3D Printer Filament: Temperatures, Times & Methods (Bambu Lab, Ender & Prusa)","slug":"how-to-dry-3d-printer-filament-temperatures-times-methods-bambu-lab-ender-prusa","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/d/d8fed0b3924e293118feb730d07b5625a5089e2c_2_1024x573.jpeg","created_at":"2026-07-03T13:14:17.963Z","last_posted_at":"2026-07-03T13:14:18.096Z","bumped":true,"bumped_at":"2026-07-03T13:14:18.096Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\nWet filament causes stringing, popping and hissing sounds, weak layers and rough surfaces. Dry it in a filament dryer, food dehydrator, or low oven at the temperature that matches your material — roughly …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":76,"like_count":0,"has_summary":false,"last_poster_username":"chris","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to Level Your 3D Printer Bed and Set the Z-Offset: Step-by-Step Guide (Bambu Lab, Ender & Prusa)","id":10437,"title":"How to Level Your 3D Printer Bed and Set the Z-Offset: Step-by-Step Guide (Bambu Lab, Ender & Prusa)","slug":"how-to-level-your-3d-printer-bed-and-set-the-z-offset-step-by-step-guide-bambu-lab-ender-prusa","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/c/c35673ff6904d60da9c5cd6e3bab87d81d437a7c_2_1024x682.jpeg","created_at":"2026-07-02T18:11:34.101Z","last_posted_at":"2026-07-02T18:11:34.208Z","bumped":true,"bumped_at":"2026-07-02T18:11:34.208Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\nA perfect first layer comes from two separate adjustments: leveling (making the whole bed evenly spaced from the nozzle) and the Z-offset (setting the exact nozzle-to-bed gap). Level the bed cold-then-war…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":89,"like_count":0,"has_summary":false,"last_poster_username":"chris","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to Fix PLA Stringing: Retraction, Temperature & Travel Fixes (Bambu Lab, Ender & Prusa)","id":10435,"title":"How to Fix PLA Stringing: Retraction, Temperature & Travel Fixes (Bambu Lab, Ender & Prusa)","slug":"how-to-fix-pla-stringing-retraction-temperature-travel-fixes-bambu-lab-ender-prusa","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/c/c35673ff6904d60da9c5cd6e3bab87d81d437a7c_2_1024x682.jpeg","created_at":"2026-06-30T18:25:51.613Z","last_posted_at":"2026-06-30T18:25:51.719Z","bumped":true,"bumped_at":"2026-06-30T18:25:51.719Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\nPLA stringing is the thin, hairy wisps of plastic left between separate parts of a print, and it comes mostly from too high a nozzle temperature, too little retraction, and damp filament. Lower the nozzle…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":68,"like_count":0,"has_summary":false,"last_poster_username":"chris","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Over-Extrusion vs Under-Extrusion: How to Diagnose and Fix Flow Problems (Bambu Lab, Ender & Prusa)","id":10434,"title":"Over-Extrusion vs Under-Extrusion: How to Diagnose and Fix Flow Problems (Bambu Lab, Ender & Prusa)","slug":"over-extrusion-vs-under-extrusion-how-to-diagnose-and-fix-flow-problems-bambu-lab-ender-prusa","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/c/c35673ff6904d60da9c5cd6e3bab87d81d437a7c_2_1024x682.jpeg","created_at":"2026-06-30T16:48:23.695Z","last_posted_at":"2026-06-30T16:48:23.817Z","bumped":true,"bumped_at":"2026-06-30T16:48:23.817Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\nOver-extrusion (blobs, zits, bulging walls, oversized dimensions) means your printer is laying down too much plastic, so lower the flow rate to around 95-97% and drop the temperature by about 5 °C. Under-…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":91,"like_count":0,"has_summary":false,"last_poster_username":"chris","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sprite pro not extruding consistently - NEED HELP","id":10432,"title":"Sprite pro not extruding consistently - NEED HELP","slug":"sprite-pro-not-extruding-consistently-need-help","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":"https://storage.3dprintingspace.com/original/2X/8/8cfb4b6b1df8f58006b1b025fdf9a0b8fbd547d3.jpeg","created_at":"2026-06-28T06:16:37.558Z","last_posted_at":"2026-06-29T10:53:01.804Z","bumped":true,"bumped_at":"2026-06-29T10:53:01.804Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi All, \nI have an ender 3 v2 purchased in 2020. Worked well - dozens of prints. \nUpgrades included: Capricorn PTFE tube / Marlin firmware / inverted bed (printing on glass side) / New bed springs. \nIn 2024 upgraded to S…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":102,"like_count":0,"has_summary":false,"last_poster_username":"aussieinkguy","category_id":18,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":3307,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Nozzle Clog or Not Extruding? How to Unclog a 3D Printer Nozzle (Bambu Lab, Ender & Prusa)","id":10429,"title":"Nozzle Clog or Not Extruding? How to Unclog a 3D Printer Nozzle (Bambu Lab, Ender & Prusa)","slug":"nozzle-clog-or-not-extruding-how-to-unclog-a-3d-printer-nozzle-bambu-lab-ender-prusa","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/c/c35673ff6904d60da9c5cd6e3bab87d81d437a7c_2_1024x682.jpeg","created_at":"2026-06-20T11:30:51.860Z","last_posted_at":"2026-06-20T11:30:52.013Z","bumped":true,"bumped_at":"2026-06-20T11:30:52.013Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\nA clogged nozzle or a printer that has stopped extruding almost always comes down to filament that is not melting and flowing freely: a partial blockage in the tip, heat creep softening the filament too e…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":80,"like_count":0,"has_summary":false,"last_poster_username":"chris","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to Fix Layer Shifting on 3D Prints: 8 Fixes (Bambu Lab, Ender & Prusa)","id":10427,"title":"How to Fix Layer Shifting on 3D Prints: 8 Fixes (Bambu Lab, Ender & Prusa)","slug":"how-to-fix-layer-shifting-on-3d-prints-8-fixes-bambu-lab-ender-prusa","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://storage.3dprintingspace.com/optimized/2X/c/c35673ff6904d60da9c5cd6e3bab87d81d437a7c_2_1024x682.jpeg","created_at":"2026-06-15T13:15:22.392Z","last_posted_at":"2026-06-16T02:47:03.932Z","bumped":true,"bumped_at":"2026-06-16T02:47:03.932Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\nLayer shifting happens when an axis loses its position mid-print, so every layer above the shift prints offset from the ones below it. The usual culprits are a loose or worn belt, loose pulley set screws,…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":88,"like_count":0,"has_summary":false,"last_poster_username":"kitedemon","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to Fix Ghosting and Ringing on 3D Prints: 7 Fixes for Sharp Walls (Bambu Lab, Ender & Prusa)","id":10428,"title":"How to Fix Ghosting and Ringing on 3D Prints: 7 Fixes for Sharp Walls (Bambu Lab, Ender & Prusa)","slug":"how-to-fix-ghosting-and-ringing-on-3d-prints-7-fixes-for-sharp-walls-bambu-lab-ender-prusa","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/4/4b7550dadb5c6ba2d196ff3472dcbaaa4cc39375_2_1024x682.jpeg","created_at":"2026-06-15T18:13:23.867Z","last_posted_at":"2026-06-15T18:13:23.989Z","bumped":true,"bumped_at":"2026-06-15T18:13:23.989Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\nGhosting (also called ringing or echoing) is the faint, repeating ripple you see just after sharp corners and around embossed text. It is caused by vibration in the printer, not by your filament. Fix it b…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":77,"like_count":0,"has_summary":false,"last_poster_username":"chris","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Creality Hi calibration and prints","id":10407,"title":"Creality Hi calibration and prints","slug":"creality-hi-calibration-and-prints","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2026-05-03T07:49:40.921Z","last_posted_at":"2026-06-14T18:42:38.117Z","bumped":true,"bumped_at":"2026-06-14T18:42:38.117Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"hey there, \ni have had a Creality HI for about 350 hrs now and just recently started producing terrible prints, under extrusion weird layer line, and many others all out of the blue, does anyone know why this could be ha…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":97,"like_count":0,"has_summary":false,"last_poster_username":"chris","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3275,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to Fix Elephant’s Foot on 3D Prints: 7 Fixes for a Clean Base (Bambu Lab & Ender)","id":10426,"title":"How to Fix Elephant's Foot on 3D Prints: 7 Fixes for a Clean Base (Bambu Lab & Ender)","slug":"how-to-fix-elephants-foot-on-3d-prints-7-fixes-for-a-clean-base-bambu-lab-ender","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/4/4b7550dadb5c6ba2d196ff3472dcbaaa4cc39375_2_1024x682.jpeg","created_at":"2026-06-14T18:13:27.649Z","last_posted_at":"2026-06-14T18:13:27.750Z","bumped":true,"bumped_at":"2026-06-14T18:13:27.750Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\nElephant’s foot is when the bottom layers of a print bulge out wider than the rest of the model. It’s almost always caused by too much heat or pressure on the first layer, so the quickest fixes are to low…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":71,"like_count":0,"has_summary":false,"last_poster_username":"chris","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to Stop 3D Print Warping and Lifting Corners (PLA, PETG and ABS Fixes)","id":10425,"title":"How to Stop 3D Print Warping and Lifting Corners (PLA, PETG and ABS Fixes)","slug":"how-to-stop-3d-print-warping-and-lifting-corners-pla-petg-and-abs-fixes","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/4/4b7550dadb5c6ba2d196ff3472dcbaaa4cc39375_2_1024x682.jpeg","created_at":"2026-06-14T14:13:36.605Z","last_posted_at":"2026-06-14T14:13:36.717Z","bumped":true,"bumped_at":"2026-06-14T14:13:36.717Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\n3D prints warp because the plastic shrinks as it cools, and uneven cooling pulls the corners up off the bed. The fix is to keep the part warm and evenly heated (correct bed temperature, no drafts, an encl…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":75,"like_count":0,"has_summary":false,"last_poster_username":"chris","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to Fix PETG Stringing: The Complete Settings Checklist (Bambu Lab)","id":10424,"title":"How to Fix PETG Stringing: The Complete Settings Checklist (Bambu Lab)","slug":"how-to-fix-petg-stringing-the-complete-settings-checklist-bambu-lab","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/d/d73fea2175f768a6786d14c6f487121658f118f0_2_1024x576.jpeg","created_at":"2026-06-13T13:55:18.893Z","last_posted_at":"2026-06-13T13:55:18.998Z","bumped":true,"bumped_at":"2026-06-13T13:55:18.998Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Quick answer\nPETG stringing is caused mostly by moisture in the filament, a nozzle temperature that’s too high, and insufficient retraction. Dry the spool at 60-65C for 6-8 hours, lower the nozzle temperature in 5C st…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":95,"like_count":0,"has_summary":false,"last_poster_username":"chris","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Tramming AKA levelling, why does it look like a cliff!","id":10418,"title":"Tramming AKA levelling, why does it look like a cliff!","slug":"tramming-aka-levelling-why-does-it-look-like-a-cliff","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":"https://storage.3dprintingspace.com/original/2X/8/89e466651bd5149d5048dc6dbf43ad5dc70c0be7.png","created_at":"2026-06-01T00:42:38.984Z","last_posted_at":"2026-06-04T22:25:19.743Z","bumped":true,"bumped_at":"2026-06-04T22:25:19.743Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"SIGH. \nI started having adhesion issues. Cleaned the PEI sheet. 3 times. no go. checked the UBL. was ok. Not much play left as I was using the silicon spacers, and things were pretty cranked down to get my old value of a…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":72,"like_count":0,"has_summary":false,"last_poster_username":"dkerrivan","category_id":126,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1821,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"0 to clog in 3 seconds","id":10408,"title":"0 to clog in 3 seconds","slug":"0-to-clog-in-3-seconds","posts_count":14,"reply_count":4,"highest_post_number":14,"image_url":"https://storage.3dprintingspace.com/original/2X/b/ba6b9117bdb61668c285acba64428391df373091.jpeg","created_at":"2026-05-04T16:44:41.223Z","last_posted_at":"2026-05-08T14:44:11.663Z","bumped":true,"bumped_at":"2026-05-08T14:44:11.663Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"PLA was supposed to be easy to print. But then I bought a new roll. \nTime to clog is about 0.3s  now. It clogs literally before bed finishes heating up. Best case it clogs 10min into the print. HELP \nBackground: Bowden s…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":203,"like_count":0,"has_summary":false,"last_poster_username":"kitedemon","category_id":7,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3276,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]}]}}