# Creality CR-10 Smart/Smart Pro **URL:** https://3dprintingspace.com/c/filament-3d-printer/cr-10-smart/126.md [Latest](https://3dprintingspace.com/latest.md) · [Categories](https://3dprintingspace.com/categories.md) --- ## [About the Creality CR-10 Smart/Smart Pro category](https://3dprintingspace.com/t/about-the-creality-cr-10-smart-smart-pro-category/5074)
**Author:** [@chris](https://3dprintingspace.com/u/chris)\ **Replies:** 1\ **Last updated:** [April 4, 2026, 3:58pm UTC](https://3dprintingspace.com/t/about-the-creality-cr-10-smart-smart-pro-category/5074 "2026-04-04T15:58:43Z")
This Tree of our Forum is dedicated to questions comments, Problems and concerns about the Creality CR-10 Smart/Smart Pro 3D printer. Feel free to post here, It will show up in the general thread tracker so anyone may r… --- ## [Tramming AKA levelling, why does it look like a cliff!](https://3dprintingspace.com/t/tramming-aka-levelling-why-does-it-look-like-a-cliff/10418)
**Author:** [@dkerrivan](https://3dprintingspace.com/u/dkerrivan)\ **Replies:** 4\ **Last updated:** [June 4, 2026, 10:25pm UTC](https://3dprintingspace.com/t/tramming-aka-levelling-why-does-it-look-like-a-cliff/10418 "2026-06-04T22:25:19Z")
SIGH. I started having adhesion issues. Cleaned the PEI sheet. 3 times. no go. checked the UBL. was ok. Not much play left as I was using the silicon spacers, and things were pretty cranked down to get my old value of a… --- ## [CR10 Smart Pro AB Temp issue - next steps?](https://3dprintingspace.com/t/cr10-smart-pro-ab-temp-issue-next-steps/10265)
**Author:** [@dkerrivan](https://3dprintingspace.com/u/dkerrivan)\ **Replies:** 19\ **Last updated:** [December 2, 2025, 12:35pm UTC](https://3dprintingspace.com/t/cr10-smart-pro-ab-temp-issue-next-steps/10265 "2025-12-02T12:35:33Z")
Ok. It’s Friday, I’ve spend too much time dealing with MS PowerShell, and while many are watching the Blue Jays and the Dodgers game tonight after the trick or treaters have made the rounds, I decided, with a mounting he… --- ## [CR-10 Smart upgrades?](https://3dprintingspace.com/t/cr-10-smart-upgrades/10237)
**Author:** [@Monson](https://3dprintingspace.com/u/Monson)\ **Replies:** 6\ **Last updated:** [September 28, 2025, 7:14pm UTC](https://3dprintingspace.com/t/cr-10-smart-upgrades/10237 "2025-09-28T19:14:23Z")
Hi, I have been using my CR-10 Smart for about two years with mixed results. I found that upgrading to a PEI Print-bed was money well spent. I was sold a Sonic Pad that I wasn’t able get work. I was sold a Silent CR-10 … --- ## [Frequent stops through print](https://3dprintingspace.com/t/frequent-stops-through-print/8351)
**Author:** [@SGSimpson](https://3dprintingspace.com/u/SGSimpson)\ **Replies:** 39\ **Last updated:** [May 6, 2024, 2:57pm UTC](https://3dprintingspace.com/t/frequent-stops-through-print/8351 "2024-05-06T14:57:39Z")
So, the definition of insane is doing the same thing over and over again, expecting different results. That’s me right now, going insane. I have a CR-10 Smart. Print starts fine, etc etc, but for some reason it has st… --- ## [CR-10 Smart Upgrades](https://3dprintingspace.com/t/cr-10-smart-upgrades/7008)
**Author:** [@blaze](https://3dprintingspace.com/u/blaze)\ **Replies:** 15\ **Last updated:** [February 26, 2024, 5:28am UTC](https://3dprintingspace.com/t/cr-10-smart-upgrades/7008 "2024-02-26T05:28:24Z")
Hey fellow CR-10 Smart users I’m blaze, one of the people here with the CR-10 Smart. I’ve had my printer for around 8 months now and have modded my printer a bunch of times. I’ve tried many upgrades, fried many motherbo… --- ## [CR10 Smart Pro ABL mesh probe and manual adjustment issues](https://3dprintingspace.com/t/cr10-smart-pro-abl-mesh-probe-and-manual-adjustment-issues/7308)
**Author:** [@dkerrivan](https://3dprintingspace.com/u/dkerrivan)\ **Replies:** 7\ **Last updated:** [December 15, 2023, 3:15am UTC](https://3dprintingspace.com/t/cr10-smart-pro-abl-mesh-probe-and-manual-adjustment-issues/7308 "2023-12-15T03:15:17Z")
I’m getting mildly annoyed with this problem, and yes, that’s after I willfully and knowingly accepted that this is a moving mechanical device with lots and lots of ways to invite Mr. Murphy… I’m not a constant user of … --- ## [Creality Large enclosure for CR10-Smart Pro and PLA oopsie](https://3dprintingspace.com/t/creality-large-enclosure-for-cr10-smart-pro-and-pla-oopsie/7328)
**Author:** [@dkerrivan](https://3dprintingspace.com/u/dkerrivan)\ **Replies:** 2\ **Last updated:** [November 6, 2023, 5:37pm UTC](https://3dprintingspace.com/t/creality-large-enclosure-for-cr10-smart-pro-and-pla-oopsie/7328 "2023-11-06T17:37:07Z")
Ok… new lesson learned this week. In addition to the probs with keeping the ABL and actual bed adjusments in sync, I had a fit of … organization?? and cleaned up space on a table in my office, and assembled, and moved th… --- ## [Head won’t go down to bed](https://3dprintingspace.com/t/head-won-t-go-down-to-bed/7162)
**Author:** [@SGSimpson](https://3dprintingspace.com/u/SGSimpson)\ **Replies:** 0\ **Last updated:** [September 19, 2023, 8:56pm UTC](https://3dprintingspace.com/t/head-won-t-go-down-to-bed/7162 "2023-09-19T20:56:42Z")
I have a Creality CR-10 Smart. And it’s acting no-so-smart… When I choose a print, it zeros out the X and Y axis then does the Z axis in the center of the build plate. On the left post of the tower, there is a red IR … --- ## [Extruder motor keeps stopping mid print](https://3dprintingspace.com/t/extruder-motor-keeps-stopping-mid-print/5284)
**Author:** [@blaze](https://3dprintingspace.com/u/blaze)\ **Replies:** 47\ **Last updated:** [June 12, 2023, 3:18pm UTC](https://3dprintingspace.com/t/extruder-motor-keeps-stopping-mid-print/5284 "2023-06-12T15:18:07Z")
Hi guys So whenever instart my print, after a few mins or hours later, the extrudrr motor stops. I dont know why but im sure its not the driver getting how cause it stops 5 mins after i start a print. Idk whats happenin… --- ## [Replacing the strain gauge on the cr 10 smart woth bl/cr touch](https://3dprintingspace.com/t/replacing-the-strain-gauge-on-the-cr-10-smart-woth-bl-cr-touch/5374)
**Author:** [@blaze](https://3dprintingspace.com/u/blaze)\ **Replies:** 0\ **Last updated:** [March 8, 2023, 1:59am UTC](https://3dprintingspace.com/t/replacing-the-strain-gauge-on-the-cr-10-smart-woth-bl-cr-touch/5374 "2023-03-08T01:59:21Z")
Hey everyone So as you know the strain gauge on the cr 6 se and cr 10 smart are not the best and have their own swt of issues. Ivr been wondering how i can switch it out for a bl/cr touch. If anyone has some progress or… --- ## [Unable to start prints via wifi (SD CARD DOES NOT WORK SO NOT AN OPTION)](https://3dprintingspace.com/t/unable-to-start-prints-via-wifi-sd-card-does-not-work-so-not-an-option/5196)
**Author:** [@blaze](https://3dprintingspace.com/u/blaze)\ **Replies:** 4\ **Last updated:** [March 4, 2023, 4:25am UTC](https://3dprintingspace.com/t/unable-to-start-prints-via-wifi-sd-card-does-not-work-so-not-an-option/5196 "2023-03-04T04:25:25Z")
Hey guys So my CR-10 Smart Doesn’t seem to be wanting to start a print. I haven’t had this issue before. It just shows this and doesn’t start. The printer screen shows the normalstuff but it just doesn’t seem to be … --- ## [Cura Profile for CR10 Smart](https://3dprintingspace.com/t/cura-profile-for-cr10-smart/5301)
**Author:** [@AstroTaj91](https://3dprintingspace.com/u/AstroTaj91)\ **Replies:** 2\ **Last updated:** [March 4, 2023, 3:38am UTC](https://3dprintingspace.com/t/cura-profile-for-cr10-smart/5301 "2023-03-04T03:38:52Z")
Can anyone share a great Cura Profile they have been using for CR10 Smart? I keep having issues, (may be retraction) with underextrusion, it was just repaired and perfectly fine from 3D printing Canada. --- ## [SD Card issues Mid Print](https://3dprintingspace.com/t/sd-card-issues-mid-print/5276)
**Author:** [@Slohand](https://3dprintingspace.com/u/Slohand)\ **Replies:** 1\ **Last updated:** [February 12, 2023, 2:18pm UTC](https://3dprintingspace.com/t/sd-card-issues-mid-print/5276 "2023-02-12T14:18:01Z")
After five years of printing on a CR10s I’ve traded up to a new CR10 Smart Pro, purchased here at 3D Printing Canada. I’ve only had it for a week or so now but I have an issue that is baffling me and wondering if this ha… --- ## [Modified CR-10 Smart Pro Printing Issues](https://3dprintingspace.com/t/modified-cr-10-smart-pro-printing-issues/5219)
**Author:** [@cy1der](https://3dprintingspace.com/u/cy1der)\ **Replies:** 28\ **Last updated:** [February 7, 2023, 12:55am UTC](https://3dprintingspace.com/t/modified-cr-10-smart-pro-printing-issues/5219 "2023-02-07T00:55:13Z")
I recently replaced the stock Sprite extruder on my CR-10 Smart Pro in favor of an E3D V6, Orbiter v2, 4020 Noctua fan, and 2 5015 blower fans, photo below. Ever since, the printer is unable to print basic calibration t…