# Creality CR-10 V2 / V3 **URL:** https://3dprintingspace.com/c/filament-3d-printer/cr10/46.md [Latest](https://3dprintingspace.com/latest.md) · [Categories](https://3dprintingspace.com/categories.md) --- ## [About the Creality CR-10 V2 / V3 category](https://3dprintingspace.com/t/about-the-creality-cr-10-v2-v3-category/62)
**Author:** [@Keith](https://3dprintingspace.com/u/Keith)\ **Replies:** 0
This category is dedicated to questions about the Creality CR-10 V2, CR-10 V3. --- ## [How to upgrade your CR10 v3 to SKR E3 Turbo](https://3dprintingspace.com/t/how-to-upgrade-your-cr10-v3-to-skr-e3-turbo/2187)
**Author:** [@sts41](https://3dprintingspace.com/u/sts41)\ **Replies:** 10\ **Last updated:** [October 2, 2023, 9:41pm UTC](https://3dprintingspace.com/t/how-to-upgrade-your-cr10-v3-to-skr-e3-turbo/2187 "2023-10-02T21:41:58Z")
I just finished getting my CR10 v3 upgraded to an SKR E3 Turbo board. I was seeing some funny things happening with the stock board, so I decided to change out the board and upgrade at the same time. Only upgrade my prin… --- ## [Please help with CR-10 V3 clogging issues!](https://3dprintingspace.com/t/please-help-with-cr-10-v3-clogging-issues/5612)
**Author:** [@InstantOafmeal](https://3dprintingspace.com/u/InstantOafmeal)\ **Replies:** 11\ **Last updated:** [May 9, 2023, 7:47pm UTC](https://3dprintingspace.com/t/please-help-with-cr-10-v3-clogging-issues/5612 "2023-05-09T19:47:39Z")
Hello! I’m hopping y’all might have a few ideas of what I can try to fix this issue. I have two Creality CR-10 V3 printers that always clog. Whenever I seem to have them working, they only get through one or two prints b… --- ## [Z axis keeps going down and hits print bed without stopping](https://3dprintingspace.com/t/z-axis-keeps-going-down-and-hits-print-bed-without-stopping/4581)
**Author:** [@Brittain](https://3dprintingspace.com/u/Brittain)\ **Replies:** 6\ **Last updated:** [October 5, 2022, 8:19pm UTC](https://3dprintingspace.com/t/z-axis-keeps-going-down-and-hits-print-bed-without-stopping/4581 "2022-10-05T20:19:16Z")
I have purchased a second user CR10s pro it was sold as a V2 but in fact is is a V1 with a failed CR touch upgrade. I have no problem as the seller was very clear and the price was good. I checked his wiring for the to… --- ## [CR10v2 upgrade Hemera](https://3dprintingspace.com/t/cr10v2-upgrade-hemera/3692)
**Author:** [@NoStress](https://3dprintingspace.com/u/NoStress)\ **Replies:** 4\ **Last updated:** [February 3, 2022, 8:27pm UTC](https://3dprintingspace.com/t/cr10v2-upgrade-hemera/3692 "2022-02-03T20:27:28Z")
hello, I used your cr10v2 upgrade to Hemera + bltouch using your Merlin from Youtube, everything works fine, I only have one problem, I can’t print again after printing, I have to turn off the printer for about 5 minutes… --- ## [Creality PEI plate adhesion issues](https://3dprintingspace.com/t/creality-pei-plate-adhesion-issues/3500)
**Author:** [@Hookup9](https://3dprintingspace.com/u/Hookup9)\ **Replies:** 21\ **Last updated:** [January 23, 2022, 11:51pm UTC](https://3dprintingspace.com/t/creality-pei-plate-adhesion-issues/3500 "2022-01-23T23:51:56Z")
Hi all. I doubt this is specific to the CR10s PRO v2, however that’s what im printing with so I posted here first. The unit is new. I’ve done the z-axis levelling, gantry level, bed level… etc… it actually was pretty … --- ## [CR10 V3 Safety Mod](https://3dprintingspace.com/t/cr10-v3-safety-mod/3342)
**Author:** [@Yarkspiri](https://3dprintingspace.com/u/Yarkspiri)\ **Replies:** 2\ **Last updated:** [December 6, 2021, 9:26am UTC](https://3dprintingspace.com/t/cr10-v3-safety-mod/3342 "2021-12-06T09:26:35Z")
Like most machines, I’ve had to replace the terminal connections since they came default with tinned wires. This video walks you through the process of doing so for the CR10 V3. --- ## [CR10 V3 - Upgrading to an All Metal Hot End](https://3dprintingspace.com/t/cr10-v3-upgrading-to-an-all-metal-hot-end/2816)
**Author:** [@Yarkspiri](https://3dprintingspace.com/u/Yarkspiri)\ **Replies:** 0\ **Last updated:** [July 17, 2021, 12:28am UTC](https://3dprintingspace.com/t/cr10-v3-upgrading-to-an-all-metal-hot-end/2816 "2021-07-17T00:28:52Z")
I’ve created an upgrade to this machine which includes an adapter along with a new cooling fan for the print. You can check out the instructions at either of these links. I hope this helps you guys out. Website Link: h… --- ## [Upgrading my CR10 V3](https://3dprintingspace.com/t/upgrading-my-cr10-v3/698)
**Author:** [@Yarkspiri](https://3dprintingspace.com/u/Yarkspiri)\ **Replies:** 5\ **Last updated:** [July 17, 2021, 12:25am UTC](https://3dprintingspace.com/t/upgrading-my-cr10-v3/698 "2021-07-17T00:25:16Z")
Here’s a couple of upgrades that I did to my CR10V3. Here’s a link to the files here: Fix for the filament run out sensor: CR10 Filament Runnout Sensor by YarkspiriFantasyArt - Thingiverse Cable Support: CR10 V3 Cable… --- ## [Bed leveling off even with the Bl-touch](https://3dprintingspace.com/t/bed-leveling-off-even-with-the-bl-touch/2484)
**Author:** [@Vero.O](https://3dprintingspace.com/u/Vero.O)\ **Replies:** 10\ **Last updated:** [May 11, 2021, 10:38pm UTC](https://3dprintingspace.com/t/bed-leveling-off-even-with-the-bl-touch/2484 "2021-05-11T22:38:28Z")
Hi, I had the BL-touch installed by 3DprintingCanada for my cr-10 V3 and it worked fairly well until now. I now have a problem where the Bl-touch does it’s probing before the print without problem but the first layer doe… --- ## [How to Change the Nozzle - CR10 V3](https://3dprintingspace.com/t/how-to-change-the-nozzle-cr10-v3/2342)
**Author:** [@Yarkspiri](https://3dprintingspace.com/u/Yarkspiri)\ **Replies:** 0\ **Last updated:** [April 18, 2021, 11:36am UTC](https://3dprintingspace.com/t/how-to-change-the-nozzle-cr10-v3/2342 "2021-04-18T11:36:12Z")
A couple of people started asking me how to go about changing the nozzle on this machine, so I created this video showing the process. \[How to Replace the nozzle on the CR10 V3\](If you just got a 3d printer and were won… --- ## [CR-10 V3 Filament Runout Sensor Worn -\> Jammed](https://3dprintingspace.com/t/cr-10-v3-filament-runout-sensor-worn-jammed/1835)
**Author:** [@Aussiemandias](https://3dprintingspace.com/u/Aussiemandias)\ **Replies:** 3\ **Last updated:** [February 26, 2021, 9:32am UTC](https://3dprintingspace.com/t/cr-10-v3-filament-runout-sensor-worn-jammed/1835 "2021-02-26T09:32:21Z")
My CR-10 V3 started jamming recently. It’s never had an issue before now. I first I did all the usual checks. I even suspected some dimensional problems with the filament I was using. But after attempting to eliminate al… --- ## [Just got my V3 - printed the default Dog](https://3dprintingspace.com/t/just-got-my-v3-printed-the-default-dog/1559)
**Author:** [@Duster6667](https://3dprintingspace.com/u/Duster6667)\ **Replies:** 3\ **Last updated:** [February 15, 2021, 12:13pm UTC](https://3dprintingspace.com/t/just-got-my-v3-printed-the-default-dog/1559 "2021-02-15T12:13:24Z")
First plastic out of my V3 FlashForge PLA+ silver --- ## [Is Hemera worth it on V3?](https://3dprintingspace.com/t/is-hemera-worth-it-on-v3/902)
**Author:** [@Duster6667](https://3dprintingspace.com/u/Duster6667)\ **Replies:** 2\ **Last updated:** [February 5, 2021, 2:28pm UTC](https://3dprintingspace.com/t/is-hemera-worth-it-on-v3/902 "2021-02-05T14:28:39Z")
Is a installing a Hemera on a V3 worth it on a brand new machine or should I wait unit I need to do hot end work? Or is there something else I should use? I’m mostly worried about dealing with the firmware. --- ## [Bed Levelling Before EVERY Print](https://3dprintingspace.com/t/bed-levelling-before-every-print/1143)
**Author:** [@midapa](https://3dprintingspace.com/u/midapa)\ **Replies:** 3\ **Last updated:** [February 5, 2021, 5:08am UTC](https://3dprintingspace.com/t/bed-levelling-before-every-print/1143 "2021-02-05T05:08:14Z")
I am having an issue where I need to level the bed of my CR-10 v3 before every print. Not just a little out of true, a lot. Anyone else have/had this problem? If so, what did you do to fix it. I have stiffer springs, but… --- ## [New V10 on way what are basic mods?](https://3dprintingspace.com/t/new-v10-on-way-what-are-basic-mods/576)
**Author:** [@daffod](https://3dprintingspace.com/u/daffod)\ **Replies:** 1\ **Last updated:** [February 3, 2021, 8:01pm UTC](https://3dprintingspace.com/t/new-v10-on-way-what-are-basic-mods/576 "2021-02-03T20:01:20Z")
Beside the bltouch what other upgrade are suggested ? i don’t want to go crazy but basic upgrades to get a quality print. --- ## [How to install a BL Touch on a Creality CR-10 V2 (Auto Bed Leveling Tutorial)](https://3dprintingspace.com/t/how-to-install-a-bl-touch-on-a-creality-cr-10-v2-auto-bed-leveling-tutorial/125)
**Author:** [@tony](https://3dprintingspace.com/u/tony)\ **Replies:** 0\ **Last updated:** [January 28, 2021, 6:49pm UTC](https://3dprintingspace.com/t/how-to-install-a-bl-touch-on-a-creality-cr-10-v2-auto-bed-leveling-tutorial/125 "2021-01-28T18:49:10Z")
Take a look at this video! We show you the way to install the BLTouch auto-bed levelling on your CR-10 V2. The items you will need to make this possible are mentioned as well! Watch the video and enhance your 3D printin…