# Creality Ender 3 S1 / S1 Pro **URL:** https://3dprintingspace.com/c/filament-3d-printer/ender-3-s1/119.md [Latest](https://3dprintingspace.com/latest.md) · [Categories](https://3dprintingspace.com/categories.md) --- ## [About the Creality Ender 3 S1 / S1 Pro category](https://3dprintingspace.com/t/about-the-creality-ender-3-s1-s1-pro-category/4582)
**Author:** [@chris](https://3dprintingspace.com/u/chris)\ **Replies:** 0
This is a sub category dedicated to problems, Issues, and solutions to the Ender 3 S1 printer. Please post any issues or comments here so others may be able to easily solutions for their printer. --- ## [Printing Letter Issues](https://3dprintingspace.com/t/printing-letter-issues/6788)
**Author:** [@juansa](https://3dprintingspace.com/u/juansa)\ **Replies:** 17\ **Last updated:** [September 22, 2026, 3:44pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788 "2026-09-22T15:44:30Z")
Hi everyone, and thank you in advance for your help! I hope that I started this topic in the correct area, if not please let me know! As you can see in the below photo, the printer (Ender 3) works more or less correctly… --- ## [Ender 3 S1 PLUS Extruder stepper motor not working](https://3dprintingspace.com/t/ender-3-s1-plus-extruder-stepper-motor-not-working/9516)
**Author:** [@Blenky](https://3dprintingspace.com/u/Blenky)\ **Replies:** 8\ **Last updated:** [October 19, 2024, 5:40pm UTC](https://3dprintingspace.com/t/ender-3-s1-plus-extruder-stepper-motor-not-working/9516 "2024-10-19T17:40:45Z")
My first major glitch on this printer in 2 years. My extruder stepper motor stopped working shortly after a 2nd print when I went to start my 3rd print. I have done the following troubleshooting steps but now I am lost… --- ## [Nozzle keeps clogging](https://3dprintingspace.com/t/nozzle-keeps-clogging/8232)
**Author:** [@MadDog05](https://3dprintingspace.com/u/MadDog05)\ **Replies:** 17\ **Last updated:** [May 9, 2024, 12:08am UTC](https://3dprintingspace.com/t/nozzle-keeps-clogging/8232 "2024-05-09T00:08:30Z")
My nozzle on my CR Ender 3 s1. Keeps clogging in the print head and I do not know why. Specifics: Printer is a year old I have printed maybe three - four rolls of filament so far, different brands Settings: • S… --- ## [Auto Bed Level Issues](https://3dprintingspace.com/t/auto-bed-level-issues/8105)
**Author:** [@wohla1](https://3dprintingspace.com/u/wohla1)\ **Replies:** 3\ **Last updated:** [March 25, 2024, 8:27pm UTC](https://3dprintingspace.com/t/auto-bed-level-issues/8105 "2024-03-25T20:27:14Z")
Hoping somebody may have a fix for this as I have been searching the internet and have not been able to find anyone else that has had this issue. I have an Ender 3S1 Pro with a Sonic pad, yesterday i was able to use the… --- ## [Ender 3 S1 Pro - Nozzle Collides with Infill on Taller Prints](https://3dprintingspace.com/t/ender-3-s1-pro-nozzle-collides-with-infill-on-taller-prints/7970)
**Author:** [@Lem0ns](https://3dprintingspace.com/u/Lem0ns)\ **Replies:** 7\ **Last updated:** [March 19, 2024, 1:36pm UTC](https://3dprintingspace.com/t/ender-3-s1-pro-nozzle-collides-with-infill-on-taller-prints/7970 "2024-03-19T13:36:24Z")
Hello fellow 3D printing enthusiasts, I’m experiencing a persistent issue with my Ender 3 S1 Pro, which is currently running the latest firmware and utilizes the Creality Sonic Pad as the interface. The printer is stock… --- ## [Nozzle Rubbing on Overhangs](https://3dprintingspace.com/t/nozzle-rubbing-on-overhangs/7848)
**Author:** [@wohla1](https://3dprintingspace.com/u/wohla1)\ **Replies:** 3\ **Last updated:** [February 24, 2024, 7:51pm UTC](https://3dprintingspace.com/t/nozzle-rubbing-on-overhangs/7848 "2024-02-24T19:51:02Z")
Hey all, I have tried looking for assistance everywhere and I seem to be getting nowhere with fixing my issue. Hoping I can find some help in here! I have an Ender 3S1 Pro with a sonic pad. I have rigged my printed to h… --- ## [Ender 3 with CR Touch goes to X max and stalls](https://3dprintingspace.com/t/ender-3-with-cr-touch-goes-to-x-max-and-stalls/7844)
**Author:** [@vanbiele](https://3dprintingspace.com/u/vanbiele)\ **Replies:** 2\ **Last updated:** [February 24, 2024, 5:15pm UTC](https://3dprintingspace.com/t/ender-3-with-cr-touch-goes-to-x-max-and-stalls/7844 "2024-02-24T17:15:05Z")
The zero and X and Y offsets are way off and I cannot find a way to reset them. I’ve reinstalled the firmware for my Marlin 32 bit board and CR Touch and it does not seem to help. When I try to level the bed it goes to… --- ## [Ender 3 S1 pro not printing- goes to 100% without printing](https://3dprintingspace.com/t/ender-3-s1-pro-not-printing-goes-to-100-without-printing/7315)
**Author:** [@gegardne](https://3dprintingspace.com/u/gegardne)\ **Replies:** 3\ **Last updated:** [November 6, 2023, 10:03pm UTC](https://3dprintingspace.com/t/ender-3-s1-pro-not-printing-goes-to-100-without-printing/7315 "2023-11-06T22:03:02Z")
Ender 3 S1 pro recently purchased from 3d Printing Canada earlier this year is not working. I have 2 of the same printer, purchased at the same time. One of the machines goes to 100 percent print progress without startin… --- ## [Im a bit unsure but my prints keep failing](https://3dprintingspace.com/t/im-a-bit-unsure-but-my-prints-keep-failing/7129)
**Author:** [@larsey](https://3dprintingspace.com/u/larsey)\ **Replies:** 10\ **Last updated:** [September 12, 2023, 11:35am UTC](https://3dprintingspace.com/t/im-a-bit-unsure-but-my-prints-keep-failing/7129 "2023-09-12T11:35:21Z")
Hello, I’m trying to print with PETG with my Ender 3 S1, but it fails 1/3 into the print. The brim seems very frail compared to the brim the Ultimaker at work makes for a solid start for a print. I’m using filament fro… --- ## [Bed Leveling is an issue](https://3dprintingspace.com/t/bed-leveling-is-an-issue/5380)
**Author:** [@WBennett](https://3dprintingspace.com/u/WBennett)\ **Replies:** 5\ **Last updated:** [June 19, 2023, 4:48pm UTC](https://3dprintingspace.com/t/bed-leveling-is-an-issue/5380 "2023-06-19T16:48:43Z")
I have manually leveled the bed many times over and over. I then run the auto bed leveling function and all of a sudden the back of the bed is coming out low when I try manually bed leveling again. Is the Cr Touch off, I… --- ## [3db printer build assistance](https://3dprintingspace.com/t/3db-printer-build-assistance/5610)
**Author:** [@Gnaneshwar](https://3dprintingspace.com/u/Gnaneshwar)\ **Replies:** 9\ **Last updated:** [May 5, 2023, 1:45pm UTC](https://3dprintingspace.com/t/3db-printer-build-assistance/5610 "2023-05-05T13:45:56Z")
I’m building an fdm type printer using Arduino mega 2560, ramps 1.4 in hotend, fan, hearbed confirmation. Using motor drivers drv8825 to run 5 stepper motors. Entire project has run perfectly when everything is run last … --- ## [Ender 3 S1 Pro Thermal Runaway](https://3dprintingspace.com/t/ender-3-s1-pro-thermal-runaway/5441)
**Author:** [@Wilhelm02](https://3dprintingspace.com/u/Wilhelm02)\ **Replies:** 19\ **Last updated:** [April 11, 2023, 5:50pm UTC](https://3dprintingspace.com/t/ender-3-s1-pro-thermal-runaway/5441 "2023-04-11T17:50:54Z")
Just installed new motherboard, new hot end, flashed the firmware in the touch screen and still getting ‘Thermal Runaway’ pop up when the nozzle starts heating. Following the instructions provided by Creality I tried t… --- ## [No Filament Feed](https://3dprintingspace.com/t/no-filament-feed/5368)
**Author:** [@LostNewfie](https://3dprintingspace.com/u/LostNewfie)\ **Replies:** 13\ **Last updated:** [March 19, 2023, 10:16pm UTC](https://3dprintingspace.com/t/no-filament-feed/5368 "2023-03-19T22:16:20Z")
Rebuilt my hot end. Will not feed filament. drive wheel is turning. please help. --- ## [High Flow kit with Sonic Pad](https://3dprintingspace.com/t/high-flow-kit-with-sonic-pad/5249)
**Author:** [@Hobbyist74](https://3dprintingspace.com/u/Hobbyist74)\ **Replies:** 6\ **Last updated:** [February 7, 2023, 3:44pm UTC](https://3dprintingspace.com/t/high-flow-kit-with-sonic-pad/5249 "2023-02-07T15:44:21Z")
Is there anyone on here that is running a S1 Pro with the S1 High Flow kit? Do you suggest the kit the get the most out of the Sonic Pad? Another question; what nozzle does the S1 High Flow use? --- ## [Handle print quality](https://3dprintingspace.com/t/handle-print-quality/5210)
**Author:** [@gsully](https://3dprintingspace.com/u/gsully)\ **Replies:** 7\ **Last updated:** [February 4, 2023, 10:53pm UTC](https://3dprintingspace.com/t/handle-print-quality/5210 "2023-02-04T22:53:47Z")
I got my machine back up and running and I printed the handle file that came on the sd card. I am printing with PLA+ with nozzle set to 215 and bed at 60. I am thinking I need to adjust something but not sure where to st… --- ## [Creality Ender S12 pro](https://3dprintingspace.com/t/creality-ender-s12-pro/5137)
**Author:** [@Charlieborg3D](https://3dprintingspace.com/u/Charlieborg3D)\ **Replies:** 4\ **Last updated:** [January 23, 2023, 3:46pm UTC](https://3dprintingspace.com/t/creality-ender-s12-pro/5137 "2023-01-23T15:46:50Z")
I bought this unit new back in December 2022. I have had several problems with it. It does not print as good as my Ender 3 pro. Now it is not reading from my SD card! Tried several different cards, same thing! I tried to… --- ## [Creality Ender 3 S1 Vase Mode Issues?](https://3dprintingspace.com/t/creality-ender-3-s1-vase-mode-issues/4583)
**Author:** [@chris](https://3dprintingspace.com/u/chris)\ **Replies:** 1\ **Last updated:** [September 15, 2022, 5:24pm UTC](https://3dprintingspace.com/t/creality-ender-3-s1-vase-mode-issues/4583 "2022-09-15T17:24:17Z")
In vase mode. Do you see all the little blobs? Even at 50 mm/s. How to avoid this? Source: https://www.reddit.com/r/3Dprinting/comments/xevko1/creality\_s1\_in\_vase\_mode\_do\_you\_see\_all\_the/