# Creality Ender 3 / 3 Pro / V2

**URL:** https://3dprintingspace.com/c/filament-3d-printer/ender3/18.md?page=1

[Latest](https://3dprintingspace.com/latest.md) · [Categories](https://3dprintingspace.com/categories.md)

**Page:** 2

---

## [Whats wrong here?](https://3dprintingspace.com/t/whats-wrong-here/5507)

<div class="topic-metadata">

**Author:** [@Paulnb57](https://3dprintingspace.com/u/Paulnb57)\
**Replies:** 1\
**Last updated:** [April 9, 2023, 5:51pm UTC](https://3dprintingspace.com/t/whats-wrong-here/5507 "2023-04-09T17:51:43Z")

</div>

Ender 3 Neo Im struggling to find decent beginner information, the Creality “Manual” is pretty useless… I have had some success but things are inconsistent. Ok, so, the bed is level on the thumb wheels. Everything is…

---

## [Looking for firmware Ender 3 V2, 4.2.7](https://3dprintingspace.com/t/looking-for-firmware-ender-3-v2-4-2-7/5426)

<div class="topic-metadata">

**Author:** [@Prophead](https://3dprintingspace.com/u/Prophead)\
**Replies:** 4\
**Last updated:** [March 24, 2023, 4:34pm UTC](https://3dprintingspace.com/t/looking-for-firmware-ender-3-v2-4-2-7/5426 "2023-03-24T16:34:02Z")

</div>

Hi CanDiver. I have just replaced the Creality 4.2.2 board with the Creality 4.2.7 Board. The problem i’m having is finding a good Firmware bin file. There are so many options out there ( including building your own f…

---

## [Ender 3 v2 No heat](https://3dprintingspace.com/t/ender-3-v2-no-heat/5343)

<div class="topic-metadata">

**Author:** [@Jaker360](https://3dprintingspace.com/u/Jaker360)\
**Replies:** 20\
**Last updated:** [March 1, 2023, 3:59pm UTC](https://3dprintingspace.com/t/ender-3-v2-no-heat/5343 "2023-03-01T15:59:18Z")

</div>

So I attempted to swap out my hot end after a massive blob problem with an overnight print. I bought a sprite extruded pro kit and followed the steps. On first attempt the heating bed began to warm up but not the hot end…

---

## [How much does z-axis rise before homing](https://3dprintingspace.com/t/how-much-does-z-axis-rise-before-homing/5313)

<div class="topic-metadata">

**Author:** [@MaddyPhi](https://3dprintingspace.com/u/MaddyPhi)\
**Replies:** 4\
**Last updated:** [February 22, 2023, 12:06am UTC](https://3dprintingspace.com/t/how-much-does-z-axis-rise-before-homing/5313 "2023-02-22T00:06:53Z")

</div>

I am using the new plugin for octoprint called ‘Power Failure Recovery’ and I got the unfortunate chance to need it the other day when I accidentally disconnected the data cable. Gladly, the recovery plugin kicked in but…

---

## [Ender 3 V2 Neo Xaxis Not Working](https://3dprintingspace.com/t/ender-3-v2-neo-xaxis-not-working/5162)

<div class="topic-metadata">

**Author:** [@cmmayer](https://3dprintingspace.com/u/cmmayer)\
**Replies:** 6\
**Last updated:** [February 14, 2023, 3:46pm UTC](https://3dprintingspace.com/t/ender-3-v2-neo-xaxis-not-working/5162 "2023-02-14T15:46:09Z")

</div>

Hello all, I have an Ender 3 v2 neo and the hotend does not move anymore along the xaxis. I have tried resetting the motors, by unplugging and plugging them back in, I have tried changing the x-limit switch and have tri…

---

## [Ender v2 printing problems](https://3dprintingspace.com/t/ender-v2-printing-problems/5288)

<div class="topic-metadata">

**Author:** [@Farmer56](https://3dprintingspace.com/u/Farmer56)\
**Replies:** 8\
**Last updated:** [February 14, 2023, 11:52am UTC](https://3dprintingspace.com/t/ender-v2-printing-problems/5288 "2023-02-14T11:52:06Z")

</div>

I have just recently purchase the creality ender v2 and when I go to print something on it, but the object that I am printing won’t stay stuck to the heat bed and the nozzle will just drag it with the filament that is co…

---

## [Having problems with layers dipping down](https://3dprintingspace.com/t/having-problems-with-layers-dipping-down/5063)

<div class="topic-metadata">

**Author:** [@Dnovotny0602](https://3dprintingspace.com/u/Dnovotny0602)\
**Replies:** 3\
**Last updated:** [January 17, 2023, 5:54pm UTC](https://3dprintingspace.com/t/having-problems-with-layers-dipping-down/5063 "2023-01-17T17:54:07Z")

</div>

New to 3d printing just got an ender 3 v2 the first 6 prints came out perfect Im using cura to slice every time i try to start a new print there is a dip like the extruder is pushing down befor it lifts off to go to the …

---

## [PETG stuck to bed!](https://3dprintingspace.com/t/petg-stuck-to-bed/4978)

<div class="topic-metadata">

**Author:** [@kharrisma](https://3dprintingspace.com/u/kharrisma)\
**Replies:** 4\
**Last updated:** [January 3, 2023, 5:24pm UTC](https://3dprintingspace.com/t/petg-stuck-to-bed/4978 "2023-01-03T17:24:41Z")

</div>

Hi Forum Folke, Ender 3, with removable magnetic bed (as shipped.) Made several prints without issue, good adhesion, minimal warping, and not difficult to release from bed. I heat with both a Toyo kerosene heater and …

---

## [Fan noise on startup](https://3dprintingspace.com/t/fan-noise-on-startup/2129)

<div class="topic-metadata">

**Author:** [@Rob1](https://3dprintingspace.com/u/Rob1)\
**Replies:** 7\
**Last updated:** [December 27, 2022, 11:00pm UTC](https://3dprintingspace.com/t/fan-noise-on-startup/2129 "2022-12-27T23:00:00Z")

</div>

When first starting up my Ender3 v2 I am getting some noise from the hotend fan. It goes away after a few seconds and doesn’t come back until the next time the machine is re-started. Is this a sign I need a new fan? I’ve…

---

## [Ender 3 Z-axis limit switch](https://3dprintingspace.com/t/ender-3-z-axis-limit-switch/4939)

<div class="topic-metadata">

**Author:** [@kharrisma](https://3dprintingspace.com/u/kharrisma)\
**Replies:** 2\
**Last updated:** [December 23, 2022, 2:54pm UTC](https://3dprintingspace.com/t/ender-3-z-axis-limit-switch/4939 "2022-12-23T14:54:53Z")

</div>

Hi Forum Folks, New member, and also new to 3D printing. Just assembled my new Ender 3, and while a bit confusing in places, it’s correctly assembled… except for maybe one thing. the harness from the motherboard that …

---

## [Random loss of layer quality](https://3dprintingspace.com/t/random-loss-of-layer-quality/4872)

<div class="topic-metadata">

**Author:** [@Mmcphee](https://3dprintingspace.com/u/Mmcphee)\
**Replies:** 13\
**Last updated:** [December 23, 2022, 2:46pm UTC](https://3dprintingspace.com/t/random-loss-of-layer-quality/4872 "2022-12-23T14:46:30Z")

</div>

Good evening printers. Looking for help with the ender 3/3v2. Been printing steadily the past few months on an ender 3v2 and prints were more or less flawless. The past couple of days I’ve been noticing a drastic change …

---

## [Awful Stringing/Blobs on Ender 3](https://3dprintingspace.com/t/awful-stringing-blobs-on-ender-3/4935)

<div class="topic-metadata">

**Author:** [@MicroFarmModels](https://3dprintingspace.com/u/MicroFarmModels)\
**Replies:** 13\
**Last updated:** [December 23, 2022, 5:07am UTC](https://3dprintingspace.com/t/awful-stringing-blobs-on-ender-3/4935 "2022-12-23T05:07:26Z")

</div>

I am reaching the end of my patience with my two ender 3 printers, hopefully some of you can help me diagnose it. Awful stringing/blobbing(see attached pictures). I am convinced the problem is either hardware or printer …

---

## [Hot End Temp jumps at start of print](https://3dprintingspace.com/t/hot-end-temp-jumps-at-start-of-print/4925)

<div class="topic-metadata">

**Author:** [@Rob1](https://3dprintingspace.com/u/Rob1)\
**Replies:** 4\
**Last updated:** [December 22, 2022, 12:22pm UTC](https://3dprintingspace.com/t/hot-end-temp-jumps-at-start-of-print/4925 "2022-12-22T12:22:02Z")

</div>

I recently changed the hot end thermistor in my Ender3 v2. It was printing fine for a few prints, then it started raising the hot end temp for no reason. It would do the pre-heat for PLA to 190 C, then appeared to raise …

---

## [Serious issue - ender 3 hotend spiked up to 245 degrees in under 10 seconds](https://3dprintingspace.com/t/serious-issue-ender-3-hotend-spiked-up-to-245-degrees-in-under-10-seconds/1849)

<div class="topic-metadata">

**Author:** [@mholder](https://3dprintingspace.com/u/mholder)\
**Replies:** 6\
**Last updated:** [February 28, 2021, 8:20am UTC](https://3dprintingspace.com/t/serious-issue-ender-3-hotend-spiked-up-to-245-degrees-in-under-10-seconds/1849 "2021-02-28T08:20:45Z")

</div>

Hi, I replaced my ender 3 hotend assembly completely, when I turned it on and tried to heat up the nozzle to insert filament to 200 degrees, I suddenly smelled serious burning and looked at the screen to see that my temp…

---

## [Under extrusion (I think)](https://3dprintingspace.com/t/under-extrusion-i-think/4727)

<div class="topic-metadata">

**Author:** [@youcantoo](https://3dprintingspace.com/u/youcantoo)\
**Replies:** 6\
**Last updated:** [November 8, 2022, 6:34pm UTC](https://3dprintingspace.com/t/under-extrusion-i-think/4727 "2022-11-08T18:34:52Z")

</div>

I’ve been searching for the last few days, trying all the troubleshooting tips/videos to try and correct this, and nothing seems to be working. It’s an issue that started a few months ago, and has been getting progressiv…

---

## [Ender 3 v2 Clogging](https://3dprintingspace.com/t/ender-3-v2-clogging/4161)

<div class="topic-metadata">

**Author:** [@Rob1](https://3dprintingspace.com/u/Rob1)\
**Replies:** 15\
**Last updated:** [November 1, 2022, 9:24am UTC](https://3dprintingspace.com/t/ender-3-v2-clogging/4161 "2022-11-01T09:24:12Z")

</div>

I have (had my Ender 3 v2 for about a year- it worked pretty well for most of that time, but lately I am having problems with clogging. I am still using the same brand of filament (IIIDMax PLA+) with hot end at 215 C and…

---

## [Bed sitting too low on Ender 3 V2](https://3dprintingspace.com/t/bed-sitting-too-low-on-ender-3-v2/3187)

<div class="topic-metadata">

**Author:** [@Worldway](https://3dprintingspace.com/u/Worldway)\
**Replies:** 8\
**Last updated:** [October 20, 2022, 10:28pm UTC](https://3dprintingspace.com/t/bed-sitting-too-low-on-ender-3-v2/3187 "2022-10-20T22:28:35Z")

</div>

So I just assembled my Ender 3 V2 following a You Tube video. I then proceeded to level my bed. Once done, I used the home command and instantly noticed a problem. The bed couldn’t travel back far enough to set the ho…

---

## [Ender3 display changing](https://3dprintingspace.com/t/ender3-display-changing/4678)

<div class="topic-metadata">

**Author:** [@Claudec](https://3dprintingspace.com/u/Claudec)\
**Replies:** 1\
**Last updated:** [October 16, 2022, 3:48pm UTC](https://3dprintingspace.com/t/ender3-display-changing/4678 "2022-10-16T15:48:49Z")

</div>

Hi everyone. I’ve reinstalled the firmware for 4.2.2 board and now the Display continues to change screen. I cannot do anything. Anyone seen this before ? and what is the solution ???

---

## [Ender 3 stopped working](https://3dprintingspace.com/t/ender-3-stopped-working/4629)

<div class="topic-metadata">

**Author:** [@vanbiele](https://3dprintingspace.com/u/vanbiele)\
**Replies:** 1\
**Last updated:** [September 30, 2022, 4:06am UTC](https://3dprintingspace.com/t/ender-3-stopped-working/4629 "2022-09-30T04:06:44Z")

</div>

I am Vanbiele - I’ve had my ender 3 for several years and it just stopped working. It has been upgraded with a BL touch and a 32 bit V4.2.7 Creality mother board. I’d been having clogging issues and just serviced my bo…

---

## [What am I not doing?](https://3dprintingspace.com/t/what-am-i-not-doing/4616)

<div class="topic-metadata">

**Author:** [@mbura](https://3dprintingspace.com/u/mbura)\
**Replies:** 13\
**Last updated:** [September 29, 2022, 10:00am UTC](https://3dprintingspace.com/t/what-am-i-not-doing/4616 "2022-09-29T10:00:04Z")

</div>

I have an ender3 v2 with a glass bed. Levelled my bed and running a bed level print. Edges fine, corners are okay but the middle is a mess. Print won’t adhere to the bed. I cleaned the glass bed with hot water and then…

---

## [Prusa Slicer Settings - Ender 3 NEO Pro](https://3dprintingspace.com/t/prusa-slicer-settings-ender-3-neo-pro/4610)

<div class="topic-metadata">

**Author:** [@Warangel](https://3dprintingspace.com/u/Warangel)\
**Replies:** 5\
**Last updated:** [September 23, 2022, 2:27pm UTC](https://3dprintingspace.com/t/prusa-slicer-settings-ender-3-neo-pro/4610 "2022-09-23T14:27:01Z")

</div>

Hey Jason, Joined the group as you recommended. Also giving Prusa a try after years of happily using Simplify3D. Any chance I could get an optimized printer settings profile from you?

---

## [Filament drag and levelling issues](https://3dprintingspace.com/t/filament-drag-and-levelling-issues/4414)

<div class="topic-metadata">

**Author:** [@mwhitney](https://3dprintingspace.com/u/mwhitney)\
**Replies:** 17\
**Last updated:** [September 21, 2022, 1:30pm UTC](https://3dprintingspace.com/t/filament-drag-and-levelling-issues/4414 "2022-09-21T13:30:06Z")

</div>

Hey guys - Hope everyone is doing well. I’ve run into problems again with the Ender3V2- the issues seem pretty similar to before - inconsistent prints even after bed levelling. Here’s where I’m at: -After frustrations…

---

## [Bl touch installed no adhesion possible](https://3dprintingspace.com/t/bl-touch-installed-no-adhesion-possible/4529)

<div class="topic-metadata">

**Author:** [@Dirtyoledog](https://3dprintingspace.com/u/Dirtyoledog)\
**Replies:** 2\
**Last updated:** [August 28, 2022, 3:43am UTC](https://3dprintingspace.com/t/bl-touch-installed-no-adhesion-possible/4529 "2022-08-28T03:43:44Z")

</div>

I have an ender 3 pro. i have an 8 bit silent board. I installed the cr bl touch device to attempt to help at adhesion issues, possible warped bed. I had new firmware flashed, sensor lights up, a touch pattern is perfo…

---

## [Hot end temperature changing during print](https://3dprintingspace.com/t/hot-end-temperature-changing-during-print/4517)

<div class="topic-metadata">

**Author:** [@Rob1](https://3dprintingspace.com/u/Rob1)\
**Replies:** 2\
**Last updated:** [August 22, 2022, 2:44am UTC](https://3dprintingspace.com/t/hot-end-temperature-changing-during-print/4517 "2022-08-22T02:44:32Z")

</div>

Lately I have been problems with my Ender3 V2. The temperature of the hot end initially starts where I set it during slicing in Cura, then after a while it jumps for some reason and stays at the higher temp. Until recen…

---

## [Polycarbonate filament on stock ender 3 v2](https://3dprintingspace.com/t/polycarbonate-filament-on-stock-ender-3-v2/4444)

<div class="topic-metadata">

**Author:** [@KOOLKOLE27](https://3dprintingspace.com/u/KOOLKOLE27)\
**Replies:** 1\
**Last updated:** [July 26, 2022, 10:07pm UTC](https://3dprintingspace.com/t/polycarbonate-filament-on-stock-ender-3-v2/4444 "2022-07-26T22:07:13Z")

</div>

I have been using petg and am looking for a different filiment that has higher impact resistance since I like to build rc airplanes and such that tend to have a bumpy impacts but the filament needs to be light. Any recom…

---

## [Ender 3 V2 no longer returning / cooling down after job](https://3dprintingspace.com/t/ender-3-v2-no-longer-returning-cooling-down-after-job/3829)

<div class="topic-metadata">

**Author:** [@mwhitney](https://3dprintingspace.com/u/mwhitney)\
**Replies:** 21\
**Last updated:** [March 15, 2022, 3:15am UTC](https://3dprintingspace.com/t/ender-3-v2-no-longer-returning-cooling-down-after-job/3829 "2022-03-15T03:15:05Z")

</div>

Hey group - brand new here. Hope everyone is happily creating! I’ve been running an Ender 3 Pro for about a 1.5 years w/ stock parts and no issues to date. I print using the stock nozzle and run the machine 1-2x per mo…

---

## [Strange squeaking noises](https://3dprintingspace.com/t/strange-squeaking-noises/2215)

<div class="topic-metadata">

**Author:** [@g\_fazio](https://3dprintingspace.com/u/g_fazio)\
**Replies:** 10\
**Last updated:** [July 5, 2022, 5:12am UTC](https://3dprintingspace.com/t/strange-squeaking-noises/2215 "2022-07-05T05:12:22Z")

</div>

Hello, I have an Ender 3 V2. It has been upgrade to a MicroSwiss Direct Drive, and BL touch. Lately, while printing, the machine keeps “squeaking and creeking sound” during the print. The print quality does not see…

---

## [Extruder stopped working](https://3dprintingspace.com/t/extruder-stopped-working/4369)

<div class="topic-metadata">

**Author:** [@Grumpy](https://3dprintingspace.com/u/Grumpy)\
**Replies:** 4\
**Last updated:** [June 29, 2022, 2:35am UTC](https://3dprintingspace.com/t/extruder-stopped-working/4369 "2022-06-29T02:35:40Z")

</div>

Hi Guys I have a 2 year old Ender 3, with a v 1.1.4 board, that was printing fine but part way through my last print the extruder quit. I could not move it manually so I plugged in the x axis cable and was able to turn…

---

## [Making Ender 3v2 Wifi capable](https://3dprintingspace.com/t/making-ender-3v2-wifi-capable/4338)

<div class="topic-metadata">

**Author:** [@uncreativeautomaton](https://3dprintingspace.com/u/uncreativeautomaton)\
**Replies:** 0\
**Last updated:** [June 16, 2022, 4:44pm UTC](https://3dprintingspace.com/t/making-ender-3v2-wifi-capable/4338 "2022-06-16T16:44:16Z")

</div>

Hey all, So I finally got around to getting Octoprint working on my computer and I got my printer to work with it too (shout out to everyone on the Octoprint discord for helping me out!) Right now I’m connecting my pri…

---

## [Temperature Jumping](https://3dprintingspace.com/t/temperature-jumping/4184)

<div class="topic-metadata">

**Author:** [@hblyleven](https://3dprintingspace.com/u/hblyleven)\
**Replies:** 2\
**Last updated:** [May 13, 2022, 4:52pm UTC](https://3dprintingspace.com/t/temperature-jumping/4184 "2022-05-13T16:52:33Z")

</div>

I have an Ender 3 v2. The temperature on the extruder keeps jumping. See video in link. https://photos.app.goo.gl/CzdNLE7nZqwGDvUK6 Any ideas?

[Previous page](https://3dprintingspace.com/c/filament-3d-printer/ender3/18.md)

[Next page](https://3dprintingspace.com/c/filament-3d-printer/ender3/18.md?page=2)
