{"users":[{"id":8,"username":"Jason","avatar_template":"/user_avatar/3dprintingspace.com/jason/{size}/6148_2.png","admin":true,"trust_level":4},{"id":4,"username":"Keith","avatar_template":"/user_avatar/3dprintingspace.com/keith/{size}/92_2.png","trust_level":3},{"id":2732,"username":"StillWizard","avatar_template":"/letter_avatar_proxy/v4/letter/s/ecc23a/{size}.png","trust_level":2},{"id":1322,"username":"Trinity","avatar_template":"/user_avatar/3dprintingspace.com/trinity/{size}/3916_2.png","trust_level":2},{"id":192,"username":"LEGOManiac","avatar_template":"/letter_avatar_proxy/v4/letter/l/ba8739/{size}.png","moderator":true,"trust_level":2},{"id":2699,"username":"Japes02","avatar_template":"/letter_avatar_proxy/v4/letter/j/8e8cbc/{size}.png","trust_level":2},{"id":2711,"username":"Shoden","avatar_template":"/letter_avatar_proxy/v4/letter/s/d78d45/{size}.png","trust_level":2},{"id":2658,"username":"MythN7","avatar_template":"/letter_avatar_proxy/v4/letter/m/e495f1/{size}.png","trust_level":2},{"id":1332,"username":"Almostgem","avatar_template":"/user_avatar/3dprintingspace.com/almostgem/{size}/8778_2.png","trust_level":2},{"id":2004,"username":"Matthew","avatar_template":"/user_avatar/3dprintingspace.com/matthew/{size}/7552_2.png","moderator":true,"trust_level":2},{"id":2553,"username":"BigJim","avatar_template":"/letter_avatar_proxy/v4/letter/b/e0b2c6/{size}.png","trust_level":2},{"id":1808,"username":"Blenky","avatar_template":"/letter_avatar_proxy/v4/letter/b/bc79bd/{size}.png","trust_level":2},{"id":1616,"username":"Davethegearhead","avatar_template":"/user_avatar/3dprintingspace.com/davethegearhead/{size}/5299_2.png","trust_level":2},{"id":520,"username":"TomP","avatar_template":"/letter_avatar_proxy/v4/letter/t/3da27b/{size}.png","trust_level":2},{"id":2557,"username":"hpd777","avatar_template":"/letter_avatar_proxy/v4/letter/h/b5ac83/{size}.png","trust_level":2},{"id":1769,"username":"tundra-mountain","avatar_template":"/user_avatar/3dprintingspace.com/tundra-mountain/{size}/6188_2.png","trust_level":2},{"id":1245,"username":"Loosenut","avatar_template":"/user_avatar/3dprintingspace.com/loosenut/{size}/3612_2.png","moderator":true,"trust_level":4},{"id":1970,"username":"MadMax","avatar_template":"/letter_avatar_proxy/v4/letter/m/8baadc/{size}.png","trust_level":2},{"id":2397,"username":"rsterne","avatar_template":"/user_avatar/3dprintingspace.com/rsterne/{size}/8046_2.png","trust_level":2},{"id":617,"username":"496","avatar_template":"/letter_avatar_proxy/v4/letter/4/82dd89/{size}.png","trust_level":2},{"id":1346,"username":"mykepredko","avatar_template":"/user_avatar/3dprintingspace.com/mykepredko/{size}/4027_2.png","trust_level":4},{"id":1112,"username":"vernonmr","avatar_template":"/letter_avatar_proxy/v4/letter/v/958977/{size}.png","trust_level":2},{"id":2088,"username":"DarkVader","avatar_template":"/letter_avatar_proxy/v4/letter/d/c68b51/{size}.png","trust_level":2},{"id":1627,"username":"MicroFarmModels","avatar_template":"/letter_avatar_proxy/v4/letter/m/9fc348/{size}.png","trust_level":2},{"id":125,"username":"LGSGreybeard","avatar_template":"/user_avatar/3dprintingspace.com/lgsgreybeard/{size}/1295_2.png","trust_level":2},{"id":618,"username":"kitedemon","avatar_template":"/letter_avatar_proxy/v4/letter/k/ecae2f/{size}.png","moderator":true,"trust_level":4},{"id":361,"username":"Glenn","avatar_template":"/user_avatar/3dprintingspace.com/glenn/{size}/728_2.png","moderator":true,"trust_level":4},{"id":25,"username":"Endernomics","avatar_template":"/letter_avatar_proxy/v4/letter/e/f07891/{size}.png","trust_level":2},{"id":1420,"username":"uturnski","avatar_template":"/letter_avatar_proxy/v4/letter/u/e56c9b/{size}.png","trust_level":2},{"id":1401,"username":"gsugar","avatar_template":"/letter_avatar_proxy/v4/letter/g/e79b87/{size}.png","trust_level":2},{"id":1305,"username":"Headrush69","avatar_template":"/letter_avatar_proxy/v4/letter/h/a8b319/{size}.png","trust_level":2},{"id":311,"username":"brittprinter","avatar_template":"/letter_avatar_proxy/v4/letter/b/d07c76/{size}.png","trust_level":2},{"id":1582,"username":"Pagan_Wizard","avatar_template":"/user_avatar/3dprintingspace.com/pagan_wizard/{size}/5115_2.png","trust_level":2},{"id":443,"username":"VagabondElf","avatar_template":"/user_avatar/3dprintingspace.com/vagabondelf/{size}/4936_2.png","trust_level":2},{"id":612,"username":"Derrick","avatar_template":"/letter_avatar_proxy/v4/letter/d/d9b06d/{size}.png","trust_level":2},{"id":1847,"username":"Mikeyg1186","avatar_template":"/letter_avatar_proxy/v4/letter/m/ecccb3/{size}.png","trust_level":2},{"id":1675,"username":"Koen","avatar_template":"/letter_avatar_proxy/v4/letter/k/a9a28c/{size}.png","trust_level":2},{"id":718,"username":"bnddbl07","avatar_template":"/user_avatar/3dprintingspace.com/bnddbl07/{size}/1243_2.png","trust_level":2},{"id":1561,"username":"CrashOpossum","avatar_template":"/letter_avatar_proxy/v4/letter/c/d78d45/{size}.png","trust_level":2},{"id":778,"username":"Blair","avatar_template":"/user_avatar/3dprintingspace.com/blair/{size}/964_2.png","trust_level":2},{"id":254,"username":"mbura","avatar_template":"/user_avatar/3dprintingspace.com/mbura/{size}/273_2.png","trust_level":2},{"id":1488,"username":"Machogg","avatar_template":"/letter_avatar_proxy/v4/letter/m/4af34b/{size}.png","trust_level":2}],"primary_groups":[],"flair_groups":[],"topic_list":{"can_create_topic":false,"filter":"latest","more_topics_url":"/c/filament-3d-printer/ender5/21?page=1","per_page":30,"topics":[{"fancy_title":"Ender 5/5 Pro Specs","id":4232,"title":"Ender 5/5 Pro Specs","slug":"ender-5-5-pro-specs","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2022-05-25T18:28:42.098Z","last_posted_at":"2022-05-25T18:28:42.272Z","bumped":true,"bumped_at":"2022-05-25T18:28:42.272Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"220x220x300mm build area (8.6 x 8.6 x 11.8 inches)\nHeated bed\nMagnetic sticker build platform\nResume printing after power loss\nFilament Diameter - 1.75mm\nHeated Bed\nPower Supply AC input 115/230V, DC output 24V 270W\nNet…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"views":639,"like_count":0,"has_summary":false,"last_poster_username":"Jason","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"About the Creality Ender 5 / 5 Pro category","id":37,"title":"About the Creality Ender 5 / 5 Pro category","slug":"about-the-creality-ender-5-5-pro-category","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2021-01-25T22:12:06.073Z","last_posted_at":null,"bumped":true,"bumped_at":"2021-02-03T20:26:15.937Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"This category is dedicated to questions about the Creality Ender 5, and Ender 5 Pro.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":466,"like_count":0,"has_summary":false,"last_poster_username":"Keith","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ender 5 mainboard switch","id":9170,"title":"Ender 5 mainboard switch","slug":"ender-5-mainboard-switch","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2024-08-21T15:28:22.846Z","last_posted_at":"2024-08-21T15:28:22.950Z","bumped":true,"bumped_at":"2024-08-21T15:28:22.950Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello all, Have issues with my ender 5 with Merlin, not extruding. Switched wires and decided board was bad. Had ender 3 board. \nRemoved V1.1.4 board and installed V4.2.2 ender 3 board. \nX servo seems to be travelling in…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":62,"like_count":0,"has_summary":false,"last_poster_username":"StillWizard","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2732,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ender 5 Pro Strange Behavior ? (Jason?)","id":3475,"title":"Ender 5 Pro Strange Behavior ? (Jason?)","slug":"ender-5-pro-strange-behavior-jason","posts_count":12,"reply_count":4,"highest_post_number":12,"image_url":null,"created_at":"2022-01-09T21:23:21.030Z","last_posted_at":"2024-07-14T20:35:52.597Z","bumped":true,"bumped_at":"2024-07-14T20:35:52.597Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"OK, \nI am a bit frustrated. A few days ago upon starting a known file, during the homing process with a BL Touch, just before the purge line was put down, the X axis was set crashing to the far left to a dead hard stop! …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1233,"like_count":1,"has_summary":false,"last_poster_username":"Shoden","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1322,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":192,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2699,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2711,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ribbon cable for Ender 5s1","id":8285,"title":"Ribbon cable for Ender 5s1","slug":"ribbon-cable-for-ender-5s1","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2024-04-17T18:01:58.567Z","last_posted_at":"2024-04-17T18:01:58.688Z","bumped":true,"bumped_at":"2024-04-17T18:01:58.688Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, I need a new ribbon cable for the Ender 5S1. The cable that goes from the control board starting at 30 pins up to the hot end which is 24 pins I believe and then the four so split offs s to the pieces on top. \nA c…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":177,"like_count":0,"has_summary":false,"last_poster_username":"MythN7","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2658,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Z Axis shows 0 - Bed is 70 - 80 mm below top stop","id":7843,"title":"Z Axis shows 0 - Bed is 70 - 80 mm below top stop","slug":"z-axis-shows-0-bed-is-70-80-mm-below-top-stop","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2024-02-23T14:57:26.385Z","last_posted_at":"2024-02-23T17:52:09.886Z","bumped":true,"bumped_at":"2024-02-23T17:52:09.886Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Had an issue that I noticed after unboxing a CR5 H Pro. The leveling dongle was bent, causing the bed to be too close to the nozzle and making for some really bad prints. I put in a ticket with Creality with pictures to …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":169,"like_count":2,"has_summary":false,"last_poster_username":"Almostgem","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1332,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Upgraded and need Help","id":7513,"title":"Upgraded and need Help","slug":"upgraded-and-need-help","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":null,"created_at":"2024-01-06T21:33:57.381Z","last_posted_at":"2024-01-08T21:44:59.370Z","bumped":true,"bumped_at":"2024-01-08T21:44:59.370Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone. new here and really hoping for some guidance. \nLast spring I got into a used 5 Pro with CRtouch. Rest of the machine was stock and it is running the newest version of Marlin. I printed all sorts of things ov…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":378,"like_count":0,"has_summary":false,"last_poster_username":"Davethegearhead","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2553,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1808,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1616,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Heat Sink Fan Problem","id":5261,"title":"Heat Sink Fan Problem","slug":"heat-sink-fan-problem","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":null,"created_at":"2023-02-09T19:40:45.716Z","last_posted_at":"2024-01-08T12:51:54.343Z","bumped":true,"bumped_at":"2024-01-08T12:51:54.343Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I was having problem with nozzle clogs part way through my prints and discovered that the Heat Sink fan was not working. I bought a new fan from 3d Printing Canada but have not been unable to make it work When I got it h…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":787,"like_count":1,"has_summary":false,"last_poster_username":"hpd777","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster, Accepted Answer","user_id":520,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2557,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ender 5 extruder skipping","id":7321,"title":"Ender 5 extruder skipping","slug":"ender-5-extruder-skipping","posts_count":15,"reply_count":5,"highest_post_number":15,"image_url":"https://storage.3dprintingspace.com/optimized/2X/c/c504f0f108d92bca226a78b20c0bb771be51e238_2_768x1024.jpeg","created_at":"2023-11-01T22:18:03.334Z","last_posted_at":"2023-12-07T20:15:09.712Z","bumped":true,"bumped_at":"2023-12-07T20:15:09.712Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"hello i am having trouble with my ender 5 pro, been sitting unused for the summer, tried doing a 3D Benchy print with generic pla the first layer prints fine and after that the feed motor starts clacking and the results …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1112,"like_count":0,"has_summary":false,"last_poster_username":"Loosenut","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1769,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ender 5 S1 Printing weird with tungsten nozzle","id":5490,"title":"Ender 5 S1 Printing weird with tungsten nozzle","slug":"ender-5-s1-printing-weird-with-tungsten-nozzle","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":"https://storage.3dprintingspace.com/optimized/2X/3/304ee5492c3925a1a474c3be77df3ee916571119_2_768x1024.jpeg","created_at":"2023-04-04T20:28:31.681Z","last_posted_at":"2023-12-01T21:18:34.022Z","bumped":true,"bumped_at":"2023-12-01T21:18:34.022Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey everyone, \nSo My printer has been printing great with standard PLA filaments from the store but my stock nozzle was getting tired so I decided it was time to do the 1st changeout. I’m also planning on printing glow-i…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":730,"like_count":0,"has_summary":false,"last_poster_username":"tundra-mountain","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1970,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2397,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1769,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Mercury one upgrade","id":7200,"title":"Mercury one upgrade","slug":"mercury-one-upgrade","posts_count":7,"reply_count":4,"highest_post_number":7,"image_url":null,"created_at":"2023-10-01T17:57:27.923Z","last_posted_at":"2023-10-03T17:32:00.346Z","bumped":true,"bumped_at":"2023-10-03T17:32:00.346Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have the sonic pad with my ender5 pro. I want to install the mercury one kit. Do l need to change anything in the firmware or once l install l can just run it?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1172,"like_count":0,"has_summary":false,"last_poster_username":"Matthew","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":617,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"CR Touch on an Ender5 pro","id":3512,"title":"CR Touch on an Ender5 pro","slug":"cr-touch-on-an-ender5-pro","posts_count":41,"reply_count":17,"highest_post_number":42,"image_url":null,"created_at":"2022-01-16T02:38:06.795Z","last_posted_at":"2023-05-09T00:30:39.664Z","bumped":true,"bumped_at":"2023-05-09T00:30:39.664Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Has anyone out there had any success installing and setting up a CR Touch on an ender5 pro. I have tried everything I have read and I can’t get it to work. I am thinking of returning it back to stock and perhaps selling …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":7787,"like_count":4,"has_summary":false,"last_poster_username":"MicroFarmModels","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1112,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1322,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2088,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1627,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Hotend maintenance - how to reduce?","id":2236,"title":"Hotend maintenance - how to reduce?","slug":"hotend-maintenance-how-to-reduce","posts_count":13,"reply_count":5,"highest_post_number":13,"image_url":null,"created_at":"2021-04-04T06:13:22.143Z","last_posted_at":"2023-04-12T19:16:55.670Z","bumped":true,"bumped_at":"2023-04-12T19:16:55.670Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"HI, all \nI’ve got about 2275 hours (mostly PETG at 240) on my Ender 5, and have had to do major hotend work (more than re-seating the Bowden tube) five times. One was myowndamnfault, and I’ll ignore it, but this still le…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1144,"like_count":4,"has_summary":false,"last_poster_username":"tundra-mountain","category_id":21,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":125,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":361,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":25,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1769,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Print adhesion, too good?","id":4875,"title":"Print adhesion, too good?","slug":"print-adhesion-too-good","posts_count":13,"reply_count":3,"highest_post_number":13,"image_url":null,"created_at":"2022-12-06T18:55:39.390Z","last_posted_at":"2023-03-14T23:47:05.040Z","bumped":true,"bumped_at":"2023-03-14T23:47:05.040Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I recently obtained an ender 5 pro and am having problems with adhesion… to good when I pull the prints off, I end up with part of the first layer staying on the bed when I pull the prints off. when I increased the first…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":716,"like_count":0,"has_summary":false,"last_poster_username":"tundra-mountain","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":1769,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Klipper on Ender 5 Pro","id":5241,"title":"Klipper on Ender 5 Pro","slug":"klipper-on-ender-5-pro","posts_count":6,"reply_count":4,"highest_post_number":6,"image_url":null,"created_at":"2023-02-06T19:50:20.333Z","last_posted_at":"2023-02-12T02:09:14.826Z","bumped":true,"bumped_at":"2023-02-12T02:09:14.826Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I had a sonic pad in my shopping cart but I figured I’ll give it a go one last time.  Lots of youtube and reading but I got most of the config figured out.  Finally got the offsets right and bed level is working now.  Ne…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":2359,"like_count":1,"has_summary":false,"last_poster_username":"uturnski","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1420,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Linear Rail kit setup","id":3163,"title":"Linear Rail kit setup","slug":"linear-rail-kit-setup","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2021-10-16T20:20:11.480Z","last_posted_at":"2023-02-04T19:20:23.816Z","bumped":true,"bumped_at":"2023-02-04T19:20:23.816Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have an ender 5 pro that I want to change to linear rail. Is it worth to change and what would it cost to switch. Is it something I can do myself. Are they just a plug and play setup.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":2973,"like_count":0,"has_summary":false,"last_poster_username":"Headrush69","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":617,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1401,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1305,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ender 5 plus stock board Klipper fubar","id":5145,"title":"Ender 5 plus stock board Klipper fubar","slug":"ender-5-plus-stock-board-klipper-fubar","posts_count":10,"reply_count":4,"highest_post_number":10,"image_url":null,"created_at":"2023-01-23T16:04:31.988Z","last_posted_at":"2023-01-26T02:07:49.605Z","bumped":true,"bumped_at":"2023-01-26T02:07:49.605Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My attempt at switching My Ender 5 plus over to Klipper has FAILed. It is frozen at the creality screen. \nI have Klipper Moonraker and Mainsail running on an Orange Pi (the orange Pi threw a few curves of it’s own). I us…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":3829,"like_count":4,"has_summary":false,"last_poster_username":"Davethegearhead","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1616,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ender 5 Pro not responsive screen blank","id":5042,"title":"Ender 5 Pro not responsive screen blank","slug":"ender-5-pro-not-responsive-screen-blank","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":"https://storage.3dprintingspace.com/optimized/2X/3/33e3bbabd92e42cc2bea17badfdb34dee5d10836_2_768x1024.jpeg","created_at":"2023-01-11T18:18:12.386Z","last_posted_at":"2023-01-19T02:01:28.225Z","bumped":true,"bumped_at":"2023-01-19T02:01:28.225Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello,  I am having an issue with my printer after I had a failed print.  The hot-end became a ball of PLA as a result of the failure.  I rescued the nozzle and removed the blob before it cooled.  I had to cut the thermi…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1513,"like_count":0,"has_summary":false,"last_poster_username":"VagabondElf","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":311,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1582,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":443,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Extruder cannot push filament through my all metal hot end","id":2089,"title":"Extruder cannot push filament through my all metal hot end","slug":"extruder-cannot-push-filament-through-my-all-metal-hot-end","posts_count":18,"reply_count":10,"highest_post_number":18,"image_url":null,"created_at":"2021-03-16T21:59:50.798Z","last_posted_at":"2023-01-09T19:11:29.608Z","bumped":true,"bumped_at":"2023-01-09T19:11:29.608Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I recently purchased an all-metal hotend and dropped it into my Ender 5 pro.  I put PLA filament into it and am able to force it out the nozzle manually.  However, when I try to print a temperature tower, no filament com…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":2288,"like_count":1,"has_summary":false,"last_poster_username":"Jason","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":612,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":361,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":192,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1847,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ender 5 Temp contol issue","id":4843,"title":"Ender 5 Temp contol issue","slug":"ender-5-temp-contol-issue","posts_count":7,"reply_count":0,"highest_post_number":7,"image_url":null,"created_at":"2022-11-30T04:23:45.883Z","last_posted_at":"2022-12-06T16:11:43.395Z","bumped":true,"bumped_at":"2022-12-06T16:11:43.395Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"This thread is a little old but I have been having similar issues recently with my ender 5. I had to replace the heater cartridge and thermistor recently. I was carful not to solder wires together as I have been warned n…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1168,"like_count":0,"has_summary":false,"last_poster_username":"Jason","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1401,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Standard Ender 5 Hemera Upgrade","id":4601,"title":"Standard Ender 5 Hemera Upgrade","slug":"standard-ender-5-hemera-upgrade","posts_count":11,"reply_count":3,"highest_post_number":11,"image_url":null,"created_at":"2022-09-20T17:52:42.901Z","last_posted_at":"2022-10-21T08:53:37.252Z","bumped":true,"bumped_at":"2022-10-21T08:53:37.252Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi there, \nI recently bought an Hemera Direct drive kit for my Ender-5, the standard version. The assembly and all went fine, but i’ve come to the part where i need to change my firmware, or so i’m told. \nI’m not really …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":693,"like_count":0,"has_summary":false,"last_poster_username":"Koen","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1675,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Unwanted filament unload","id":3317,"title":"Unwanted filament unload","slug":"unwanted-filament-unload","posts_count":11,"reply_count":4,"highest_post_number":11,"image_url":null,"created_at":"2021-11-24T22:02:40.472Z","last_posted_at":"2022-07-26T22:20:32.706Z","bumped":true,"bumped_at":"2022-07-26T22:20:32.706Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi. I  have an ender 5pro and sometimes it will unload all the filament in the tube before it starts printing. I have tried different SYL file and still unloads the filament. What causes this and how do I fix it?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":800,"like_count":4,"has_summary":false,"last_poster_username":"Glenn","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1112,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":192,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":361,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"BLtouch Problem Ender Pro","id":4015,"title":"BLtouch Problem Ender Pro","slug":"bltouch-problem-ender-pro","posts_count":14,"reply_count":3,"highest_post_number":14,"image_url":null,"created_at":"2022-04-07T16:18:13.619Z","last_posted_at":"2022-06-17T17:13:49.182Z","bumped":true,"bumped_at":"2022-06-17T17:13:49.182Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I still cannot get my Cr touch to work. I have read all the posts I could find and tried them all I have re flashed the firmware with every version for an Ender 5pro. Nothing works. I have had another person read the ins…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1089,"like_count":2,"has_summary":false,"last_poster_username":"vernonmr","category_id":21,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1112,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1420,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"5+ Heating less on one side…?","id":4319,"title":"5+ Heating less on one side...?","slug":"5-heating-less-on-one-side","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2022-06-12T17:10:47.366Z","last_posted_at":"2022-06-13T10:14:23.778Z","bumped":true,"bumped_at":"2022-06-13T10:14:23.778Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Good Day, \nI’ll get to the point with my question then explain:   Is it POSSIBLE to have the heated bed start to fail on the Left side only?   or is it an all or nothing thing…?    (EDITed before posting… your “Your topi…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":352,"like_count":2,"has_summary":false,"last_poster_username":"bnddbl07","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":718,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster, Accepted Answer","user_id":1346,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ender 5 Pro/bltouch – z-offset not used","id":4242,"title":"Ender 5 Pro/bltouch -- z-offset not used","slug":"ender-5-pro-bltouch-z-offset-not-used","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":null,"created_at":"2022-05-28T20:49:53.483Z","last_posted_at":"2022-06-02T16:51:33.529Z","bumped":true,"bumped_at":"2022-06-02T16:51:33.529Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, \nThis the first time I’ve posted to an online forum, so if I put my foot wrong please correct me. \nI have an Ender 5 pro that I have used successfully for two years. I added a bltouch about a year and a half ago whic…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1764,"like_count":1,"has_summary":false,"last_poster_username":"Jason","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":520,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Hemera Upgrade (Following Tutorial – Got Stuck)","id":4227,"title":"Hemera Upgrade (Following Tutorial -- Got Stuck)","slug":"hemera-upgrade-following-tutorial-got-stuck","posts_count":31,"reply_count":15,"highest_post_number":31,"image_url":"https://storage.3dprintingspace.com/optimized/2X/c/c28b823ed26b84ea6a0314c2d90fe3f38c147f7a_2_1024x539.jpeg","created_at":"2022-05-25T15:15:20.803Z","last_posted_at":"2022-05-31T19:48:08.613Z","bumped":true,"bumped_at":"2022-05-31T19:48:08.613Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi! I’m following the Hemera Ender 5 Plus tutorial, but I’ve gotten stuck with the Visual Studio Code part. When they go to build, they have a menu I don’t have and can’t figure out how to get. I’m a bit coding ignorant,…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1829,"like_count":1,"has_summary":false,"last_poster_username":"Jason","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1561,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"BLTouch not probing bed","id":4181,"title":"BLTouch not probing bed","slug":"bltouch-not-probing-bed","posts_count":9,"reply_count":2,"highest_post_number":9,"image_url":null,"created_at":"2022-05-12T19:11:37.676Z","last_posted_at":"2022-05-20T23:25:23.569Z","bumped":true,"bumped_at":"2022-05-20T23:25:23.569Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Okidoki.  I’ve a BLTouch installed on my Ender-5 Pro, wired up as the Z Endstop as per Teaching Tech’s instrucitons, running Marlin 2.-something-bugfix, and everything worked fine for ages, until suddenly it just stopped…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":2008,"like_count":0,"has_summary":false,"last_poster_username":"VagabondElf","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":443,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":778,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"What would the cause of this be?","id":3970,"title":"What would the cause of this be?","slug":"what-would-the-cause-of-this-be","posts_count":7,"reply_count":1,"highest_post_number":7,"image_url":"https://storage.3dprintingspace.com/optimized/2X/b/bb5ea0ecf61bd40b5c59ed4361b5974cfad95776_2_576x1024.jpeg","created_at":"2022-03-29T11:56:56.130Z","last_posted_at":"2022-05-10T12:17:09.250Z","bumped":true,"bumped_at":"2022-05-10T12:17:09.250Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am printing with PETG \nNozzle temp is 250 \nBed is 70 \nPrinter is in an enclosure \n  \nAll my litter layers are doing this but the pieces are pretty solid. What causes this?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":429,"like_count":0,"has_summary":false,"last_poster_username":"mbura","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":254,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ender 5 Pro CR Touch failed","id":3732,"title":"Ender 5 Pro CR Touch failed","slug":"ender-5-pro-cr-touch-failed","posts_count":14,"reply_count":7,"highest_post_number":14,"image_url":null,"created_at":"2022-02-08T13:49:17.122Z","last_posted_at":"2022-03-10T15:42:46.857Z","bumped":true,"bumped_at":"2022-04-07T19:34:30.570Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello… I need to pick some brains… \nI’ve purchased the Ender 5 Pro in December and I have to admit I’ve been having more issues than I thought I would.  I consider myself technically inclined and I think most of my issue…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":3654,"like_count":2,"has_summary":false,"last_poster_username":"Jason","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1420,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":361,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1112,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":192,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ender5 to 5Pro issue","id":4005,"title":"Ender5 to 5Pro issue","slug":"ender5-to-5pro-issue","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":null,"created_at":"2022-04-05T13:59:11.495Z","last_posted_at":"2022-04-06T11:59:51.849Z","bumped":true,"bumped_at":"2022-04-06T11:59:51.849Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Upgrading two ender 5 printers to ender 5 Pro configuration. The LCD screen quickly flashes and clicks between Information screen and other screen while heating and printing.  The clicking is driving my wife to distracti…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":591,"like_count":0,"has_summary":false,"last_poster_username":"Machogg","category_id":21,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1488,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]}]}}