{"users":[{"id":8,"username":"Jason","avatar_template":"/user_avatar/3dprintingspace.com/jason/{size}/6148_2.png","admin":true,"trust_level":4},{"id":343,"username":"PJprincefpv","avatar_template":"/user_avatar/3dprintingspace.com/pjprincefpv/{size}/262_2.png","trust_level":2},{"id":1346,"username":"mykepredko","avatar_template":"/user_avatar/3dprintingspace.com/mykepredko/{size}/4027_2.png","trust_level":4},{"id":291,"username":"eeffoc","avatar_template":"/user_avatar/3dprintingspace.com/eeffoc/{size}/233_2.png","trust_level":2},{"id":192,"username":"LEGOManiac","avatar_template":"/letter_avatar_proxy/v4/letter/l/ba8739/{size}.png","moderator":true,"trust_level":2},{"id":1738,"username":"AJ-3D","avatar_template":"/letter_avatar_proxy/v4/letter/a/df705f/{size}.png","trust_level":2},{"id":3,"username":"tony","avatar_template":"/user_avatar/3dprintingspace.com/tony/{size}/218_2.png","trust_level":4},{"id":4,"username":"Keith","avatar_template":"/user_avatar/3dprintingspace.com/keith/{size}/92_2.png","trust_level":3},{"id":3356,"username":"realbecca","avatar_template":"/letter_avatar_proxy/v4/letter/r/898d66/{size}.png","trust_level":2},{"id":1245,"username":"Loosenut","avatar_template":"/user_avatar/3dprintingspace.com/loosenut/{size}/3612_2.png","moderator":true,"trust_level":4},{"id":1292,"username":"Mikeyxx","avatar_template":"/letter_avatar_proxy/v4/letter/m/3ab097/{size}.png","trust_level":2},{"id":2657,"username":"TimInElmira","avatar_template":"/user_avatar/3dprintingspace.com/timinelmira/{size}/8902_2.png","trust_level":2},{"id":3351,"username":"WestonPierce","avatar_template":"/letter_avatar_proxy/v4/letter/w/ad7895/{size}.png","trust_level":2},{"id":3329,"username":"Pates455","avatar_template":"/letter_avatar_proxy/v4/letter/p/b9bd4f/{size}.png","trust_level":2},{"id":3332,"username":"Richardwt","avatar_template":"/letter_avatar_proxy/v4/letter/r/76d3ee/{size}.png","trust_level":2},{"id":1582,"username":"Pagan_Wizard","avatar_template":"/user_avatar/3dprintingspace.com/pagan_wizard/{size}/5115_2.png","trust_level":2},{"id":3354,"username":"Repton","avatar_template":"/letter_avatar_proxy/v4/letter/r/ee7513/{size}.png","trust_level":2},{"id":2378,"username":"97camaroturbo","avatar_template":"/letter_avatar_proxy/v4/letter/9/90ced4/{size}.png","trust_level":2},{"id":800,"username":"HobbyMaker3D","avatar_template":"/letter_avatar_proxy/v4/letter/h/bb73d2/{size}.png","trust_level":2},{"id":3349,"username":"BrassKettle","avatar_template":"/user_avatar/3dprintingspace.com/brasskettle/{size}/10664_2.png","trust_level":2},{"id":3167,"username":"Spencer-3D","avatar_template":"/user_avatar/3dprintingspace.com/spencer-3d/{size}/10538_2.png","moderator":true,"trust_level":4},{"id":3309,"username":"vikas","avatar_template":"/letter_avatar_proxy/v4/letter/v/ac91a4/{size}.png","trust_level":2},{"id":3091,"username":"genewayman","avatar_template":"/letter_avatar_proxy/v4/letter/g/aeb1de/{size}.png","trust_level":2},{"id":618,"username":"kitedemon","avatar_template":"/letter_avatar_proxy/v4/letter/k/ecae2f/{size}.png","moderator":true,"trust_level":4},{"id":3089,"username":"Agtrea","avatar_template":"/letter_avatar_proxy/v4/letter/a/e79b87/{size}.png","trust_level":2},{"id":3320,"username":"Nullbrawl","avatar_template":"/letter_avatar_proxy/v4/letter/n/4af34b/{size}.png","trust_level":2},{"id":3306,"username":"MrGameShow","avatar_template":"/letter_avatar_proxy/v4/letter/m/ce73a5/{size}.png","trust_level":2},{"id":2,"username":"chris","avatar_template":"/user_avatar/3dprintingspace.com/chris/{size}/1090_2.png","admin":true,"trust_level":4},{"id":1821,"username":"dkerrivan","avatar_template":"/user_avatar/3dprintingspace.com/dkerrivan/{size}/6279_2.png","trust_level":2},{"id":3286,"username":"divertas","avatar_template":"/letter_avatar_proxy/v4/letter/d/ac8455/{size}.png","trust_level":2},{"id":3243,"username":"Kirky","avatar_template":"/letter_avatar_proxy/v4/letter/k/ed8c4c/{size}.png","trust_level":2},{"id":2591,"username":"Bobbi1977","avatar_template":"/letter_avatar_proxy/v4/letter/b/35a633/{size}.png","trust_level":2},{"id":3249,"username":"tina3dp","avatar_template":"/letter_avatar_proxy/v4/letter/t/9dc877/{size}.png","trust_level":2},{"id":3221,"username":"PapaStove","avatar_template":"/letter_avatar_proxy/v4/letter/p/ac91a4/{size}.png","trust_level":2},{"id":3202,"username":"4qseven","avatar_template":"/letter_avatar_proxy/v4/letter/4/4da419/{size}.png","trust_level":2},{"id":3246,"username":"koiuy","avatar_template":"/letter_avatar_proxy/v4/letter/k/67e7ee/{size}.png","trust_level":2}],"primary_groups":[],"flair_groups":[],"topic_list":{"can_create_topic":false,"filter":"latest","more_topics_url":"/c/general/1?page=1","per_page":30,"topics":[{"fancy_title":"The Gcode Dictonary","id":2978,"title":"The Gcode Dictonary","slug":"the-gcode-dictonary","posts_count":4,"reply_count":0,"highest_post_number":6,"image_url":null,"created_at":"2021-08-26T19:16:40.201Z","last_posted_at":"2022-01-25T17:44:10.990Z","bumped":true,"bumped_at":"2022-01-25T17:44:10.990Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"If anyone needs a quick link to the Gcode dictionary here it is. \nhttps://reprap.org/wiki/G-code","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1242,"like_count":1,"has_summary":false,"last_poster_username":"mykepredko","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":343,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Troubleshooting - Pictoral","id":2977,"title":"Troubleshooting - Pictoral","slug":"troubleshooting-pictoral","posts_count":5,"reply_count":0,"highest_post_number":6,"image_url":null,"created_at":"2021-08-26T19:14:12.491Z","last_posted_at":"2023-04-10T18:00:16.151Z","bumped":true,"bumped_at":"2023-04-10T18:00:16.151Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"I found this today researching something online thought someone may be able to use it here. \nIt’s actually pretty awesome. \nhttps://reprap.org/wiki/Print_Troubleshooting_Pictorial_Guide","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1049,"like_count":1,"has_summary":false,"last_poster_username":"AJ-3D","category_id":1,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":291,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":192,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1738,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Membership Trust Levels on our Forum","id":819,"title":"Membership Trust Levels on our Forum","slug":"membership-trust-levels-on-our-forum","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2021-02-03T22:06:14.685Z","last_posted_at":"2021-02-03T22:06:14.836Z","bumped":true,"bumped_at":"2021-02-03T22:06:14.836Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"As this Forum is new I am posting this as an informational message to our new users. \nWithin this forum, Discourse has enabled a specific AI to identify and eliminate Bot users. As you are more active in the Forum the re…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"views":995,"like_count":3,"has_summary":false,"last_poster_username":"Jason","category_id":1,"op_like_count":3,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Terms of the Forum","id":31,"title":"Terms of the Forum","slug":"terms-of-the-forum","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2021-01-25T22:02:42.685Z","last_posted_at":"2021-01-25T22:02:42.980Z","bumped":true,"bumped_at":"2021-01-26T18:15:32.063Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"These terms govern use of the Internet forum at http://3dprintingspace.com. To use the forum, you must agree to these terms with 3D Printing Space, the company that runs the forum. \nThe company may offer other products a…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":748,"like_count":0,"has_summary":false,"last_poster_username":"tony","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":3,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Do I really need 3 machines for one project?","id":10461,"title":"Do I really need 3 machines for one project?","slug":"do-i-really-need-3-machines-for-one-project","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-09-04T10:30:08.506Z","last_posted_at":"2026-09-04T17:08:47.193Z","bumped":true,"bumped_at":"2026-09-04T17:08:47.193Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Trying to keep my setup small, but every project seems to need a bit of everything: FDM for the part, laser for a panel/marking, CNC for the bits that need actual cutting. \nThe annoying part isn’t even the work. It’s mov…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":5,"like_count":0,"has_summary":false,"last_poster_username":"Loosenut","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3356,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"I have a question for our community members/readers","id":5350,"title":"I have a question for our community members/readers","slug":"i-have-a-question-for-our-community-members-readers","posts_count":33,"reply_count":15,"highest_post_number":33,"image_url":null,"created_at":"2023-03-01T16:16:14.065Z","last_posted_at":"2026-09-04T00:34:03.828Z","bumped":true,"bumped_at":"2026-09-04T00:34:03.828Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone, \nI was thinking about the forum on my rather long drive to Ottawa and was wondering a couple of things hope you would not mind answering for me. \nWhere does our community base come from? Are most of you loca…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":654,"like_count":26,"has_summary":false,"last_poster_username":"WestonPierce","category_id":1,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1346,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1292,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2657,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":3351,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"3D printing issu : vertical walls are not straight","id":10452,"title":"3D printing issu : vertical walls are not straight","slug":"3d-printing-issu-vertical-walls-are-not-straight","posts_count":8,"reply_count":0,"highest_post_number":8,"image_url":"https://storage.3dprintingspace.com/optimized/2X/e/e29088fa0e7288a45a66d8b43c4f909571d191f2_2_768x1024.jpeg","created_at":"2026-08-07T23:39:45.792Z","last_posted_at":"2026-09-02T14:09:31.227Z","bumped":true,"bumped_at":"2026-09-02T14:09:31.227Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi everyone, \nI’m having an issue on all my 3D prints with my Bambu Lab A1. Whenever a model has a vertical wall that ends with a flat horizontal surface, the walls tend to deform/lean instead of staying straight (see ph…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":68,"like_count":0,"has_summary":false,"last_poster_username":"Loosenut","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3329,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3332,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1582,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":3354,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Picture added to object","id":10445,"title":"Picture added to object","slug":"picture-added-to-object","posts_count":14,"reply_count":10,"highest_post_number":14,"image_url":"https://storage.3dprintingspace.com/optimized/2X/6/6eec2981021aaa54a9a84f228a6bf774a72b2ba8_2_1024x1024.jpeg","created_at":"2026-07-20T04:30:59.102Z","last_posted_at":"2026-09-01T15:51:37.422Z","bumped":true,"bumped_at":"2026-09-01T15:51:37.422Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Im having a hard time getting this picture added to my object and being able to edit it. No mater what I do nothing changes.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":97,"like_count":0,"has_summary":false,"last_poster_username":"BrassKettle","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2378,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2657,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":800,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":3349,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"PLA - coefficient of expancion","id":10459,"title":"PLA - coefficient of expancion","slug":"pla-coefficient-of-expancion","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2026-08-28T20:06:21.072Z","last_posted_at":"2026-08-31T18:21:47.188Z","bumped":true,"bumped_at":"2026-08-31T18:21:47.188Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I printed out a new number plate for my house, thick black base with thinner top layers in copper coloured PLA. Both where PLA+ but different brands. I noticed that the plate now has a significant warp in it, outwards to…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":27,"like_count":0,"has_summary":false,"last_poster_username":"Loosenut","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":3167,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Why are so many people getting into 3D printing?","id":10433,"title":"Why are so many people getting into 3D printing?","slug":"why-are-so-many-people-getting-into-3d-printing","posts_count":15,"reply_count":6,"highest_post_number":15,"image_url":null,"created_at":"2026-06-30T10:43:38.926Z","last_posted_at":"2026-08-23T21:15:32.509Z","bumped":true,"bumped_at":"2026-08-23T21:15:32.509Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"If you’ve been following the 3D printing community over the last few years, you’ve probably noticed how much it has grown. What was once considered a niche hobby is now being used by students, hobbyists, engineers, and e…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":200,"like_count":2,"has_summary":false,"last_poster_username":"Mikeyxx","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3309,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2657,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":3332,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1292,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Old Guy with a Ton of Questions","id":10253,"title":"Old Guy with a Ton of Questions","slug":"old-guy-with-a-ton-of-questions","posts_count":23,"reply_count":9,"highest_post_number":23,"image_url":null,"created_at":"2025-10-15T22:39:03.245Z","last_posted_at":"2026-08-18T00:04:36.159Z","bumped":true,"bumped_at":"2026-08-18T00:04:36.159Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Biting the bullet and looking into 3D printers to support my wife’s obsession. I recently retired after spending around 40 years running CAD (ComputerVision, CATIA, and NX). I’m hoping to get some help with all the begin…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":250,"like_count":6,"has_summary":false,"last_poster_username":"Pagan_Wizard","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3091,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":800,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1582,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Simple project, for now","id":10444,"title":"Simple project, for now","slug":"simple-project-for-now","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://storage.3dprintingspace.com/optimized/2X/c/cef05b180c23de9a0fab419dfca0b05533e14baa_2_1024x768.jpeg","created_at":"2026-07-17T19:35:09.264Z","last_posted_at":"2026-07-29T17:43:38.330Z","bumped":true,"bumped_at":"2026-07-29T17:43:38.330Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My shop has cheap Venetian blinds in it and over time the parts that mount them to the windows get brittle and break. You can buy these cheap but that wouldn’t be right, we have the technology to make them “better, faste…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":39,"like_count":1,"has_summary":false,"last_poster_username":"Loosenut","category_id":1,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Python mod? Question to the room","id":10334,"title":"Python mod? Question to the room","slug":"python-mod-question-to-the-room","posts_count":8,"reply_count":1,"highest_post_number":8,"image_url":null,"created_at":"2026-01-21T04:14:02.932Z","last_posted_at":"2026-07-21T18:29:42.539Z","bumped":true,"bumped_at":"2026-07-21T18:29:42.539Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey @kitedemon Question just for you… :slight_smile: \nIn this thread What are your thoughts? P1S vs P2S - #3 by kitedemon \nyou mentioned a Python mod for the AMS, I have to ask, Never heard of this before what is it? \nI …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":133,"like_count":0,"has_summary":false,"last_poster_username":"kitedemon","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3089,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":3320,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Creality Print update","id":10441,"title":"Creality Print update","slug":"creality-print-update","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-07-05T19:54:32.016Z","last_posted_at":"2026-07-05T19:54:32.156Z","bumped":true,"bumped_at":"2026-07-05T19:54:32.156Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Creality has just released a significant upgrade to Creality Print. \n7.2.0.5226 \nCreality Print | Creality Slicer Softwares & Firmware Download","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":38,"like_count":0,"has_summary":false,"last_poster_username":"Loosenut","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"What would cause this?","id":10431,"title":"What would cause this?","slug":"what-would-cause-this","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://storage.3dprintingspace.com/optimized/2X/2/2b3683af89a88a545daccef33e10c7249ab8f8bb_2_576x1024.jpeg","created_at":"2026-06-24T02:27:38.933Z","last_posted_at":"2026-06-24T14:29:00.297Z","bumped":true,"bumped_at":"2026-06-24T14:29:00.297Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello friends! \nI just got my new X2D over the weekend, and am trying some homegrown tokens I made - but as I’ve been printing with the BL PLA BLACK, I’ve come in to see part way throguh the print it’s banding a little w…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":39,"like_count":0,"has_summary":false,"last_poster_username":"Loosenut","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3306,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"K1 max extruder motor problems","id":10422,"title":"K1 max extruder motor problems","slug":"k1-max-extruder-motor-problems","posts_count":12,"reply_count":4,"highest_post_number":12,"image_url":null,"created_at":"2026-06-05T20:58:30.135Z","last_posted_at":"2026-06-14T01:10:23.432Z","bumped":true,"bumped_at":"2026-06-14T01:10:23.432Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Help!\nThe last time I used the printer it worked fine. Today I tried to use it and the extruder motor has the “jitters”,  it doesn’t rotate. The drive gear on the stepper motor spindle just vibrates back and forth a bit …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":98,"like_count":1,"has_summary":false,"last_poster_username":"Loosenut","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1821,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Upgrading Longer LK5 Pro with BTT SKR mini E3 V3 & Pi2 v1.0.1","id":10415,"title":"Upgrading Longer LK5 Pro with BTT SKR mini E3 V3 & Pi2 v1.0.1","slug":"upgrading-longer-lk5-pro-with-btt-skr-mini-e3-v3-pi2-v1-0-1","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-05-19T22:32:05.341Z","last_posted_at":"2026-06-04T02:04:55.851Z","bumped":true,"bumped_at":"2026-06-04T02:04:55.851Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Thank you in advance for helping a neophyte in the printing world. I have been printing with a Prusa until a few years ago I got fed up with constant repairs. Last year I found the Longer LK5 Pro and bought it. I used it…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":30,"like_count":0,"has_summary":false,"last_poster_username":"dkerrivan","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3286,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1821,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Reusable filament spools","id":10413,"title":"Reusable filament spools","slug":"reusable-filament-spools","posts_count":4,"reply_count":0,"highest_post_number":4,"image_url":null,"created_at":"2026-05-14T16:40:33.123Z","last_posted_at":"2026-05-20T20:39:36.956Z","bumped":true,"bumped_at":"2026-05-20T20:39:36.956Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Is this still a thing??? \nI have some, are the centre diameters the same on all/most filament spools. Can I use different brands on these spools??","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":85,"like_count":0,"has_summary":false,"last_poster_username":"Spencer-3D","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":800,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":3167,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Trouble with prints lifting off the bed…again!","id":10412,"title":"Trouble with prints lifting off the bed...again!","slug":"trouble-with-prints-lifting-off-the-bed-again","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":null,"created_at":"2026-05-09T15:01:11.542Z","last_posted_at":"2026-05-13T17:01:59.799Z","bumped":true,"bumped_at":"2026-05-13T17:01:59.799Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have had trouble with a print, 3 try’s and it lifted off the bed every time. I have been using a new, too me, high speed type filament. I set the temp. to match the recommended ones for each print speed on the part. No…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":64,"like_count":0,"has_summary":false,"last_poster_username":"Loosenut","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2657,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Best Multi-Color 3D Printers for Hobbyists (2026 Guide)","id":10410,"title":"Best Multi-Color 3D Printers for Hobbyists (2026 Guide)","slug":"best-multi-color-3d-printers-for-hobbyists-2026-guide","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-05-04T20:11:06.827Z","last_posted_at":"2026-05-05T17:30:39.939Z","bumped":true,"bumped_at":"2026-05-05T17:30:39.939Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Multi-color 3D printing sounds simple… until you actually use it. \nThe reality: \n\n\nMost printers fail at reliable filament switching \n\n\nMulti-color always introduces waste + time penalties \n\n\nSoftware matters more than h…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":881,"like_count":2,"has_summary":false,"last_poster_username":"kitedemon","category_id":1,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Room filter update","id":10401,"title":"Room filter update","slug":"room-filter-update","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-04-30T20:54:43.464Z","last_posted_at":"2026-05-02T10:15:43.375Z","bumped":true,"bumped_at":"2026-05-02T10:15:43.375Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Last week some of us where contemplating the need for a room air filter because of potential micro plastic contact. I purchased a small room filter, only about 9" square and a foot high but it has two filters, one on eac…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":54,"like_count":1,"has_summary":false,"last_poster_username":"kitedemon","category_id":1,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Any Flashforge info","id":10396,"title":"Any Flashforge info","slug":"any-flashforge-info","posts_count":4,"reply_count":0,"highest_post_number":4,"image_url":null,"created_at":"2026-04-18T21:35:20.050Z","last_posted_at":"2026-04-20T09:20:29.565Z","bumped":true,"bumped_at":"2026-04-20T09:20:29.565Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I know that Bambo Labs is a leading company in the 3d printing world. But is there any information for users with a Flashforge machine?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":44,"like_count":0,"has_summary":false,"last_poster_username":"kitedemon","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3243,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2591,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"I just got an Anycubic Kobra X","id":10394,"title":"I just got an Anycubic Kobra X","slug":"i-just-got-an-anycubic-kobra-x","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-04-17T22:36:35.463Z","last_posted_at":"2026-04-17T22:36:35.574Z","bumped":true,"bumped_at":"2026-04-17T22:36:35.574Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve had two good years with a Creality Ender 3 V3 SE. Once calibrated, that was a good workhorse. That printer has now gone on for kids to learn on (our local Catholic elementary school). \nI gave in to the hype and boug…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":153,"like_count":0,"has_summary":false,"last_poster_username":"TimInElmira","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2657,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Been printing more ABS lately… air feels kinda off","id":10389,"title":"Been printing more ABS lately… air feels kinda off","slug":"been-printing-more-abs-lately-air-feels-kinda-off","posts_count":19,"reply_count":8,"highest_post_number":19,"image_url":null,"created_at":"2026-04-11T08:14:19.845Z","last_posted_at":"2026-04-17T11:33:40.476Z","bumped":true,"bumped_at":"2026-04-17T11:33:40.476Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Lately I’ve been printing quite a bit of ABS. Didn’t really think much about it at first, but after a few longer jobs the room just feels… not great. \nSmell sticks around more than I expected, and the air feels a bit hea…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":179,"like_count":0,"has_summary":false,"last_poster_username":"kitedemon","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3249,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3221,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1582,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ams2pro stacker (3 units)","id":10391,"title":"Ams2pro stacker (3 units)","slug":"ams2pro-stacker-3-units","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2026-04-15T09:34:49.436Z","last_posted_at":"2026-04-16T02:31:49.846Z","bumped":true,"bumped_at":"2026-04-16T02:31:49.846Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am currently looking for a solution to hold three ams vertically as space on my tool chest is limited to 41inch across. \nI am right now using a h2c, with 3 ams2pro, and 1 ams-ht. \nI would love to know what designs and …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":136,"like_count":0,"has_summary":false,"last_poster_username":"kitedemon","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3221,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":800,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ender 3 s1 pro base layer","id":10390,"title":"Ender 3 s1 pro base layer","slug":"ender-3-s1-pro-base-layer","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":"https://storage.3dprintingspace.com/optimized/2X/4/445be326e0ff7449feb81ca881f3c9b1ae44f5e6_2_768x1024.jpeg","created_at":"2026-04-11T22:53:13.713Z","last_posted_at":"2026-04-12T14:10:36.466Z","bumped":true,"bumped_at":"2026-04-12T14:10:36.466Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am having difficulty with the base layers for the supports for my ender 3 s1 pro, any thoughts as to why they look like this?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":33,"like_count":0,"has_summary":false,"last_poster_username":"Loosenut","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3202,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ender 3 s1 and s1 pro printer maintenance","id":10383,"title":"Ender 3 s1 and s1 pro printer maintenance","slug":"ender-3-s1-and-s1-pro-printer-maintenance","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2026-04-04T13:40:21.509Z","last_posted_at":"2026-04-12T14:04:23.472Z","bumped":true,"bumped_at":"2026-04-12T14:04:23.472Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey guys, I was wondering what you would do maintenance wise for your 3d printers or more specifically for an ender 3 s1 and s1 pro? also how often do you do the various forms of maintenance?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":56,"like_count":0,"has_summary":false,"last_poster_username":"Loosenut","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3202,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Food safe PLA, maybe","id":10388,"title":"Food safe PLA, maybe","slug":"food-safe-pla-maybe","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":"https://storage.3dprintingspace.com/optimized/2X/c/cf7cf7e320ba76dfa7e1455b8a7e19c71ed5fe4c_2_1024x576.jpeg","created_at":"2026-04-10T21:39:22.998Z","last_posted_at":"2026-04-12T13:54:32.006Z","bumped":true,"bumped_at":"2026-04-12T13:54:32.006Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Joel at 3D Printing Nerd has a video on making PLA food safe.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":39,"like_count":0,"has_summary":false,"last_poster_username":"Loosenut","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Best Laser Printer Drum Expert Advice","id":10385,"title":"Best Laser Printer Drum Expert Advice","slug":"best-laser-printer-drum-expert-advice","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-04-08T11:06:10.494Z","last_posted_at":"2026-04-08T13:53:59.758Z","bumped":true,"bumped_at":"2026-04-08T13:53:59.758Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have been looking into the laser printer drum for my office printer. I spent a days reading about it because I need a replacement that I can count on. I looked at reviews on PCMag, TechRadar and some printer forums. Th…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":50,"like_count":0,"has_summary":false,"last_poster_username":"Loosenut","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3246,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Recommendations For Trouble With Larger Flat Pieces","id":10381,"title":"Recommendations For Trouble With Larger Flat Pieces","slug":"recommendations-for-trouble-with-larger-flat-pieces","posts_count":5,"reply_count":0,"highest_post_number":5,"image_url":null,"created_at":"2026-04-03T22:58:21.481Z","last_posted_at":"2026-04-07T01:02:24.727Z","bumped":true,"bumped_at":"2026-04-07T01:02:24.727Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have been trying, with no success, printing larger flat pieces. One piece was a funnel for a Kitchen Aid mixer (from Makerworld), and the other is a shelf for my IR sauna (5.5 x 5.5 triangle). Each one came loose from …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":58,"like_count":0,"has_summary":false,"last_poster_username":"kitedemon","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3091,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]}]}}