# Other Hobbies

**URL:** https://3dprintingspace.com/c/hobbies/72.md

[Latest](https://3dprintingspace.com/latest.md) · [Categories](https://3dprintingspace.com/categories.md)

---

## [About the Other Hobbies category](https://3dprintingspace.com/t/about-the-other-hobbies-category/1229)

<div class="topic-metadata">

**Author:** [@chris](https://3dprintingspace.com/u/chris)\
**Replies:** 1\
**Last updated:** [February 7, 2021, 2:01am UTC](https://3dprintingspace.com/t/about-the-other-hobbies-category/1229 "2021-02-07T02:01:32Z")

</div>

A place to discuss other hobbies that compliment 3d printing.

---

## [Printing RC Plane Stuff](https://3dprintingspace.com/t/printing-rc-plane-stuff/1440)

<div class="topic-metadata">

**Author:** [@new2print](https://3dprintingspace.com/u/new2print)\
**Replies:** 15\
**Last updated:** [December 21, 2024, 2:00am UTC](https://3dprintingspace.com/t/printing-rc-plane-stuff/1440 "2024-12-21T02:00:31Z")

</div>

So I just saw this topic of RC related items. I use my printer for making some parts for my rc planes, such as servo horns, engine mounts, servo connector keepers and such. But I mainly use it to make small mounts and pa…

---

## [Specify laser engraving speed](https://3dprintingspace.com/t/specify-laser-engraving-speed/7013)

<div class="topic-metadata">

**Author:** [@dontknwmucboutanythn](https://3dprintingspace.com/u/dontknwmucboutanythn)\
**Replies:** 1\
**Last updated:** [August 9, 2023, 8:49pm UTC](https://3dprintingspace.com/t/specify-laser-engraving-speed/7013 "2023-08-09T20:49:13Z")

</div>

Hello, I am a total newbie in 3D printing, CNC, and laser engraver. I recently bought a used 3-in-1 Creality CP-01. What is the gcode command for specifying the speed in which the laser beam moves? In the CP-01 instr…

---

## [xTool D1 Pro Laser Engraving Machine](https://3dprintingspace.com/t/xtool-d1-pro-laser-engraving-machine/6844)

<div class="topic-metadata">

**Author:** [@garyogden1957uk](https://3dprintingspace.com/u/garyogden1957uk)\
**Replies:** 3\
**Last updated:** [July 17, 2023, 4:30pm UTC](https://3dprintingspace.com/t/xtool-d1-pro-laser-engraving-machine/6844 "2023-07-17T16:30:06Z")

</div>

Seriously looking at getting the xTool D1 Pro Laser Engraving Machine. I know there is most likely a different forum for these engravers. Just wondering if anyone has one and your comments please?

---

## [K40 Laser not framing project, hits hard limit X and Y](https://3dprintingspace.com/t/k40-laser-not-framing-project-hits-hard-limit-x-and-y/5559)

<div class="topic-metadata">

**Author:** [@antsriondel](https://3dprintingspace.com/u/antsriondel)\
**Replies:** 8\
**Last updated:** [April 24, 2023, 5:08pm UTC](https://3dprintingspace.com/t/k40-laser-not-framing-project-hits-hard-limit-x-and-y/5559 "2023-04-24T17:08:15Z")

</div>

So my laser finally started working, but when I went to frame my project on light burn, it said I was hitting a hard limit X. So I tried again and it said I hit a hard limit Y. All help is appreciated!

---

## [Lightburn not recognizing OMTech K40 Laser, need help](https://3dprintingspace.com/t/lightburn-not-recognizing-omtech-k40-laser-need-help/5525)

<div class="topic-metadata">

**Author:** [@antsriondel](https://3dprintingspace.com/u/antsriondel)\
**Replies:** 1\
**Last updated:** [April 13, 2023, 2:10pm UTC](https://3dprintingspace.com/t/lightburn-not-recognizing-omtech-k40-laser-need-help/5525 "2023-04-13T14:10:40Z")

</div>

I recently bought an OMTech K40 Laser and I was really excited to get it going. But when I got it and tried to connect my laser on Light burn it found the laser so I tried to frame a new cut and nothing happened. I made …

---

## [Best Laser machine on the market for cutting clear acrylic sheets](https://3dprintingspace.com/t/best-laser-machine-on-the-market-for-cutting-clear-acrylic-sheets/5312)

<div class="topic-metadata">

**Author:** [@antsriondel](https://3dprintingspace.com/u/antsriondel)\
**Replies:** 1\
**Last updated:** [February 20, 2023, 11:34pm UTC](https://3dprintingspace.com/t/best-laser-machine-on-the-market-for-cutting-clear-acrylic-sheets/5312 "2023-02-20T23:34:12Z")

</div>

I need a laser cutter that can cut through 4-6 mm acrylic sheets. I also need it to either be able to upgrade to or have compatibility with Lightburn software.Thanks!

---

## [I'm the first?!?](https://3dprintingspace.com/t/im-the-first/4672)

<div class="topic-metadata">

**Author:** [@Bikemike](https://3dprintingspace.com/u/Bikemike)\
**Replies:** 17\
**Last updated:** [February 14, 2023, 3:45pm UTC](https://3dprintingspace.com/t/im-the-first/4672 "2023-02-14T15:45:09Z")

</div>

Well, I can’t be the only one that got the TS3 laser. Here a few of the things I have been working on.

---

## [Laser engraver not cutting acrylic, need help](https://3dprintingspace.com/t/laser-engraver-not-cutting-acrylic-need-help/5220)

<div class="topic-metadata">

**Author:** [@antsriondel](https://3dprintingspace.com/u/antsriondel)\
**Replies:** 8\
**Last updated:** [February 7, 2023, 2:06pm UTC](https://3dprintingspace.com/t/laser-engraver-not-cutting-acrylic-need-help/5220 "2023-02-07T14:06:00Z")

</div>

So, I bought my Creality Laser Falcon and it can cut wood perfectly, but I need it to cut acrylic, but when I try to cut it barely leaves a mark. I have it at max power and it still does nothing. I adjust the laser heigh…

---

## [Laser cutter slicer?](https://3dprintingspace.com/t/laser-cutter-slicer/5152)

<div class="topic-metadata">

**Author:** [@antsriondel](https://3dprintingspace.com/u/antsriondel)\
**Replies:** 2\
**Last updated:** [January 25, 2023, 1:46pm UTC](https://3dprintingspace.com/t/laser-cutter-slicer/5152 "2023-01-25T13:46:24Z")

</div>

I have a laser cutter and I have created my own design, and I have it as an STL, and I was wondering if I need to get a slicer to laser engrave my design? All help is appreciated, thanks. :slightly\_smiling\_face:

---

## [Creality Laser Falcon programs for MacOS](https://3dprintingspace.com/t/creality-laser-falcon-programs-for-macos/5053)

<div class="topic-metadata">

**Author:** [@antsriondel](https://3dprintingspace.com/u/antsriondel)\
**Replies:** 9\
**Last updated:** [January 22, 2023, 12:28am UTC](https://3dprintingspace.com/t/creality-laser-falcon-programs-for-macos/5053 "2023-01-22T00:28:25Z")

</div>

I have the Creality Laser Falcon and I am wondering if there is any software for this Laser on MacOS. All help is appreciated. :slightly\_smiling\_face:

---

## [Raspberry Pi loses temp sensor and cam](https://3dprintingspace.com/t/raspberry-pi-loses-temp-sensor-and-cam/5034)

<div class="topic-metadata">

**Author:** [@Davethegearhead](https://3dprintingspace.com/u/Davethegearhead)\
**Replies:** 10\
**Last updated:** [January 13, 2023, 6:08pm UTC](https://3dprintingspace.com/t/raspberry-pi-loses-temp-sensor-and-cam/5034 "2023-01-13T18:08:00Z")

</div>

Hi This post is a bit off topic. I had searched other forums and even posted on Octoprint community but haven’t gotten anywhere. Maybe someone here has seen something similar. I have an Ender 3 Max setup with a heated e…

---

## [C-R Laser falcon not cutting](https://3dprintingspace.com/t/c-r-laser-falcon-not-cutting/5050)

<div class="topic-metadata">

**Author:** [@antsriondel](https://3dprintingspace.com/u/antsriondel)\
**Replies:** 5\
**Last updated:** [January 13, 2023, 4:52pm UTC](https://3dprintingspace.com/t/c-r-laser-falcon-not-cutting/5050 "2023-01-13T16:52:07Z")

</div>

Hi, I recently bought a Creality laser falcon, and when I received it I put it together with no problems and everything was going great. When it finally came to start cutting, I put in the already preloaded file in, and …

---

## [NEW - Twotrees TS3 10W Enclosed Laser Engraver now in stock!](https://3dprintingspace.com/t/new-twotrees-ts3-10w-enclosed-laser-engraver-now-in-stock/4562)

<div class="topic-metadata">

**Author:** [@Sarah](https://3dprintingspace.com/u/Sarah)\
**Replies:** 1\
**Last updated:** [September 24, 2022, 2:46pm UTC](https://3dprintingspace.com/t/new-twotrees-ts3-10w-enclosed-laser-engraver-now-in-stock/4562 "2022-09-24T14:46:28Z")

</div>

Shop Here: Twotrees TS3 10W Enclosed Laser Engraver | Laser Engravers - 3D Printing Canada

---

## [Other hobbies to compliment 3d printing](https://3dprintingspace.com/t/other-hobbies-to-compliment-3d-printing/1228)

<div class="topic-metadata">

**Author:** [@Benchy](https://3dprintingspace.com/u/Benchy)\
**Replies:** 32\
**Last updated:** [July 29, 2022, 12:21pm UTC](https://3dprintingspace.com/t/other-hobbies-to-compliment-3d-printing/1228 "2022-07-29T12:21:59Z")

</div>

What other hobbies do you guys have to compliment your 3d prints? I run a wood lathe to turn wood or plastic spindles, I have an arc welder and can braze aluminum, and I run a small forge for steel parts. What else do…

---

## [I'm into Trucks cars boats](https://3dprintingspace.com/t/im-into-trucks-cars-boats/3413)

<div class="topic-metadata">

**Author:** [@Jaredsay1974](https://3dprintingspace.com/u/Jaredsay1974)\
**Replies:** 0\
**Last updated:** [December 28, 2021, 6:08pm UTC](https://3dprintingspace.com/t/im-into-trucks-cars-boats/3413 "2021-12-28T18:08:11Z")

</div>

I own two emax 3906 two 1/10 Erevo two rustler two 4x4 stampede three speed Pioneers two 1/16 erevo three clod buster two scx10 two TL01 two hpi sprint two trx4 one trx6 snap-on hauler and I’m looking for someone that c…

---

## [Oh the things I would do with this](https://3dprintingspace.com/t/oh-the-things-i-would-do-with-this/3230)

<div class="topic-metadata">

**Author:** [@Jason](https://3dprintingspace.com/u/Jason)\
**Replies:** 0\
**Last updated:** [November 1, 2021, 8:43pm UTC](https://3dprintingspace.com/t/oh-the-things-i-would-do-with-this/3230 "2021-11-01T20:43:08Z")

</div>

A friend of mine just picked up one of these bad boys, got it with all the toys too. Tool changer, flexible Vac Table system, Air pressure tool clamp. Was up helping him set it up. I was just drooling. the actual bed s…

---

## [I'm in the dog house](https://3dprintingspace.com/t/im-in-the-dog-house/2446)

<div class="topic-metadata">

**Author:** [@Benchy](https://3dprintingspace.com/u/Benchy)\
**Replies:** 15\
**Last updated:** [May 9, 2021, 5:40pm UTC](https://3dprintingspace.com/t/im-in-the-dog-house/2446 "2021-05-09T17:40:41Z")

</div>

So where I work has been shut down for a few days related to the pandemic, I’ve been…shopping… My wife has officially had enough, most stuff has been small and to be honest I don’t think she noticed alot of it. Yesterda…

---

## [CNC 2-1 recommendations?](https://3dprintingspace.com/t/cnc-2-1-recommendations/2181)

<div class="topic-metadata">

**Author:** [@Outrider5](https://3dprintingspace.com/u/Outrider5)\
**Replies:** 2\
**Last updated:** [March 26, 2021, 7:41pm UTC](https://3dprintingspace.com/t/cnc-2-1-recommendations/2181 "2021-03-26T19:41:57Z")

</div>

hey guys, in the market for a small dual milling machine/engraver/ laser cutter. any reccomendations? currently looking at machines on amazon but if there is one out there that is a good starter machine i am all ears! w…

---

## [Printing model boats](https://3dprintingspace.com/t/printing-model-boats/1520)

<div class="topic-metadata">

**Author:** [@Keithwspc](https://3dprintingspace.com/u/Keithwspc)\
**Replies:** 10\
**Last updated:** [February 25, 2021, 3:15am UTC](https://3dprintingspace.com/t/printing-model-boats/1520 "2021-02-25T03:15:26Z")

</div>

I am creating a 3D printed 1/20 scale model of an 8 meter shoal sailboat designed by me. This activity is so interesting it looks like more model boats are in my future. The forum will be a great source of suggestions fo…

---

## [3DSets RC Cars Build log](https://3dprintingspace.com/t/3dsets-rc-cars-build-log/1729)

<div class="topic-metadata">

**Author:** [@TriPunk](https://3dprintingspace.com/u/TriPunk)\
**Replies:** 3\
**Last updated:** [February 20, 2021, 5:43am UTC](https://3dprintingspace.com/t/3dsets-rc-cars-build-log/1729 "2021-02-20T05:43:25Z")

</div>

I’ve been working on this 3d printed RC car for a few weeks now. I picked up an RC car around New Year for rock crawling and ended up, inevitably, printing parts for it. I then learned of a site called 3dsets.com that m…

---

## [Arduino tutorial temp and humidity sensor](https://3dprintingspace.com/t/arduino-tutorial-temp-and-humidity-sensor/1692)

<div class="topic-metadata">

**Author:** [@Benchy](https://3dprintingspace.com/u/Benchy)\
**Replies:** 5\
**Last updated:** [February 18, 2021, 1:31am UTC](https://3dprintingspace.com/t/arduino-tutorial-temp-and-humidity-sensor/1692 "2021-02-18T01:31:33Z")

</div>

So here’s a temperature and humidity sensor for your 3d printer enclosure or filament box, that displays the humidity percentage and temp in Celsius on a lcd screen. It’s made using an Arduino Uno R3 Materials list: 1—…

---

## [3D printed tools](https://3dprintingspace.com/t/3d-printed-tools/1552)

<div class="topic-metadata">

**Author:** [@eeffoc](https://3dprintingspace.com/u/eeffoc)\
**Replies:** 13\
**Last updated:** [February 17, 2021, 7:57pm UTC](https://3dprintingspace.com/t/3d-printed-tools/1552 "2021-02-17T19:57:39Z")

</div>

Here are a few tools that I have printed for my other hobby kerf compensation jig Vacuum adapter for my miter saw Mini sanding block Marking gauge

---

## [RC YouTube channel](https://3dprintingspace.com/t/rc-youtube-channel/1549)

<div class="topic-metadata">

**Author:** [@TLW3D](https://3dprintingspace.com/u/TLW3D)\
**Replies:** 11\
**Last updated:** [February 13, 2021, 5:31pm UTC](https://3dprintingspace.com/t/rc-youtube-channel/1549 "2021-02-13T17:31:23Z")

</div>

---

## [Arduino programming](https://3dprintingspace.com/t/arduino-programming/1548)

<div class="topic-metadata">

**Author:** [@Benchy](https://3dprintingspace.com/u/Benchy)\
**Replies:** 1\
**Last updated:** [February 12, 2021, 1:26pm UTC](https://3dprintingspace.com/t/arduino-programming/1548 "2021-02-12T13:26:55Z")

</div>

If you program for the arduino, or are interested in programming for the arduino, why don’t we introduce ourselves, since problem solving tends to benefit from crowd sourcing a bit. It’s always good to have minds to b…
