{"users":[{"id":1489,"username":"chris.p","avatar_template":"/user_avatar/3dprintingspace.com/chris.p/{size}/5231_2.png","moderator":true,"trust_level":4},{"id":304,"username":"Yarkspiri","avatar_template":"/user_avatar/3dprintingspace.com/yarkspiri/{size}/234_2.png","trust_level":2},{"id":3,"username":"tony","avatar_template":"/user_avatar/3dprintingspace.com/tony/{size}/218_2.png","trust_level":4},{"id":2163,"username":"Alshain","avatar_template":"/letter_avatar_proxy/v4/letter/a/e9c0ed/{size}.png","trust_level":2},{"id":2705,"username":"J_Hillz","avatar_template":"/letter_avatar_proxy/v4/letter/j/eb8c5e/{size}.png","trust_level":2},{"id":2367,"username":"Somedev","avatar_template":"/letter_avatar_proxy/v4/letter/s/aca169/{size}.png","trust_level":2},{"id":2630,"username":"NickGarai","avatar_template":"/letter_avatar_proxy/v4/letter/n/ec9cab/{size}.png","trust_level":2},{"id":2004,"username":"Matthew","avatar_template":"/user_avatar/3dprintingspace.com/matthew/{size}/7552_2.png","moderator":true,"trust_level":2},{"id":263,"username":"Spankygrant","avatar_template":"/user_avatar/3dprintingspace.com/spankygrant/{size}/190_2.png","trust_level":2},{"id":2634,"username":"Sizzly","avatar_template":"/letter_avatar_proxy/v4/letter/s/71c47a/{size}.png","trust_level":2},{"id":778,"username":"Blair","avatar_template":"/user_avatar/3dprintingspace.com/blair/{size}/964_2.png","trust_level":2},{"id":2077,"username":"slapp","avatar_template":"/letter_avatar_proxy/v4/letter/s/cab0a1/{size}.png","trust_level":2},{"id":1245,"username":"Loosenut","avatar_template":"/user_avatar/3dprintingspace.com/loosenut/{size}/3612_2.png","moderator":true,"trust_level":4},{"id":1860,"username":"Gilengine1","avatar_template":"/letter_avatar_proxy/v4/letter/g/a9adbd/{size}.png","trust_level":2},{"id":2521,"username":"CICERO.CRUZ","avatar_template":"/letter_avatar_proxy/v4/letter/c/898d66/{size}.png","trust_level":2},{"id":2478,"username":"PewCat","avatar_template":"/letter_avatar_proxy/v4/letter/p/258eb7/{size}.png","trust_level":2},{"id":47,"username":"TurkeyOnRye","avatar_template":"/user_avatar/3dprintingspace.com/turkeyonrye/{size}/1788_2.png","trust_level":2},{"id":2476,"username":"ken1","avatar_template":"/letter_avatar_proxy/v4/letter/k/4491bb/{size}.png","trust_level":2},{"id":1842,"username":"Tiago","avatar_template":"/letter_avatar_proxy/v4/letter/t/f0a364/{size}.png","trust_level":2},{"id":2455,"username":"fcpr","avatar_template":"/letter_avatar_proxy/v4/letter/f/46a35a/{size}.png","trust_level":2},{"id":2437,"username":"Tiki","avatar_template":"/letter_avatar_proxy/v4/letter/t/a88e4f/{size}.png","trust_level":2},{"id":2,"username":"chris","avatar_template":"/user_avatar/3dprintingspace.com/chris/{size}/1090_2.png","admin":true,"trust_level":4},{"id":2421,"username":"jokerlegende","avatar_template":"/letter_avatar_proxy/v4/letter/j/9d8465/{size}.png","trust_level":2},{"id":2395,"username":"Angela","avatar_template":"/letter_avatar_proxy/v4/letter/a/f9ae1b/{size}.png","trust_level":2},{"id":800,"username":"HobbyMaker3D","avatar_template":"/letter_avatar_proxy/v4/letter/h/bb73d2/{size}.png","trust_level":2},{"id":2373,"username":"Zeekiah","avatar_template":"/letter_avatar_proxy/v4/letter/z/b77776/{size}.png","trust_level":2},{"id":8,"username":"Jason","avatar_template":"/user_avatar/3dprintingspace.com/jason/{size}/6148_2.png","admin":true,"trust_level":4},{"id":2322,"username":"BrendanFollick","avatar_template":"/letter_avatar_proxy/v4/letter/b/a9a28c/{size}.png","trust_level":2},{"id":2279,"username":"sgv8200","avatar_template":"/letter_avatar_proxy/v4/letter/s/d07c76/{size}.png","trust_level":2},{"id":618,"username":"kitedemon","avatar_template":"/letter_avatar_proxy/v4/letter/k/ecae2f/{size}.png","moderator":true,"trust_level":4},{"id":2148,"username":"irl.wizard","avatar_template":"/letter_avatar_proxy/v4/letter/i/ecae2f/{size}.png","trust_level":2},{"id":2141,"username":"JustinSchubert","avatar_template":"/letter_avatar_proxy/v4/letter/j/85e7bf/{size}.png","trust_level":2},{"id":2082,"username":"TocowaGreg","avatar_template":"/letter_avatar_proxy/v4/letter/t/57b2e6/{size}.png","trust_level":2},{"id":1996,"username":"Brnbar01","avatar_template":"/letter_avatar_proxy/v4/letter/b/7993a0/{size}.png","trust_level":2},{"id":1948,"username":"Avi95","avatar_template":"/letter_avatar_proxy/v4/letter/a/9fc29f/{size}.png","trust_level":2},{"id":1946,"username":"Michaelviper","avatar_template":"/letter_avatar_proxy/v4/letter/m/b2d939/{size}.png","trust_level":2},{"id":1541,"username":"Lucas","avatar_template":"/letter_avatar_proxy/v4/letter/l/ba8739/{size}.png","trust_level":2},{"id":1904,"username":"disc91","avatar_template":"/letter_avatar_proxy/v4/letter/d/e47774/{size}.png","trust_level":2},{"id":1836,"username":"Nyavodar","avatar_template":"/letter_avatar_proxy/v4/letter/n/e19adc/{size}.png","trust_level":2},{"id":839,"username":"Marc","avatar_template":"/letter_avatar_proxy/v4/letter/m/8dc957/{size}.png","trust_level":2},{"id":1768,"username":"JJ99","avatar_template":"/letter_avatar_proxy/v4/letter/j/8edcca/{size}.png","trust_level":2},{"id":129,"username":"Kemot","avatar_template":"/user_avatar/3dprintingspace.com/kemot/{size}/129_2.png","trust_level":2},{"id":1218,"username":"lauran","avatar_template":"/user_avatar/3dprintingspace.com/lauran/{size}/4205_2.png","moderator":true,"trust_level":4},{"id":657,"username":"Kilted_Dragon","avatar_template":"/letter_avatar_proxy/v4/letter/k/dbc845/{size}.png","trust_level":2}],"primary_groups":[],"flair_groups":[],"topic_list":{"can_create_topic":false,"filter":"latest","more_topics_url":"/c/resin-3d-printer/32?page=1","per_page":30,"topics":[{"fancy_title":"Resin Printer Exposure Settings","id":4609,"title":"Resin Printer Exposure Settings","slug":"resin-printer-exposure-settings","posts_count":2,"reply_count":0,"highest_post_number":3,"image_url":"https://storage.3dprintingspace.com/optimized/2X/6/670a10b2d7ea0c57dcced0c3613a2383d8de9deb_2_1024x554.jpeg","created_at":"2022-09-22T17:21:54.079Z","last_posted_at":"2023-02-25T10:31:50.779Z","bumped":true,"bumped_at":"2023-02-25T10:31:50.779Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"Resin Printer Exposure Test Print \nThe Resin XP2 Validation Matrix is a print that I run on every new machine and with every new resin I try. It is a small 10 minute print that shows you which way to dial in your setting…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":2138,"like_count":4,"has_summary":false,"last_poster_username":"Yarkspiri","category_id":32,"op_like_count":4,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1489,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":304,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"About the Resin 3D Printer Technical Help category","id":48,"title":"About the Resin 3D Printer Technical Help category","slug":"about-the-resin-3d-printer-technical-help-category","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2021-01-25T22:33:04.777Z","last_posted_at":null,"bumped":true,"bumped_at":"2021-02-02T19:36:42.155Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"Post your questions and our community will assist you in resolving your Resin 3d printer technical problems.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":456,"like_count":0,"has_summary":false,"last_poster_username":"tony","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":3,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"New to 3D printing, Halot Mage printing fails","id":6662,"title":"New to 3D printing, Halot Mage printing fails","slug":"new-to-3d-printing-halot-mage-printing-fails","posts_count":8,"reply_count":3,"highest_post_number":8,"image_url":null,"created_at":"2023-07-01T07:25:42.616Z","last_posted_at":"2024-11-07T16:44:09.399Z","bumped":true,"bumped_at":"2024-11-07T16:44:09.399Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, \nI’ve just been given the Halot Mage for my birthday last week. I carefully watched several setup and test videos, including the one from 3D Printing Canada, and I thought I’d be able to manage, but I’m afraid tha…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":3717,"like_count":1,"has_summary":false,"last_poster_username":"Matthew","category_id":132,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2163,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2705,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2367,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2630,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Strongest clear resin for RC boat","id":8294,"title":"Strongest clear resin for RC boat","slug":"strongest-clear-resin-for-rc-boat","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2024-04-18T01:44:27.321Z","last_posted_at":"2024-04-20T15:14:15.905Z","bumped":true,"bumped_at":"2024-04-20T15:14:15.905Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello . \nMy brother wants me to use my resin printer to make a clear rudder for his new RC boat. Only been using my printer 4 months and have not tried clear resin yet. \nConsidering this is something that will be in the …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":94,"like_count":0,"has_summary":false,"last_poster_username":"Matthew","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":263,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"What FEP Film for Halot One Pro","id":7928,"title":"What FEP Film for Halot One Pro","slug":"what-fep-film-for-halot-one-pro","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2024-03-04T00:03:10.476Z","last_posted_at":"2024-03-04T02:39:09.380Z","bumped":true,"bumped_at":"2024-03-04T02:39:09.380Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi. \nI was cleaning my printer and poked a hole in my FEP sheet. I’m having a bear of a time finding what to buy to fix the issue.  Any suggestions for my Halot One Pro?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":292,"like_count":1,"has_summary":false,"last_poster_username":"Blair","category_id":132,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2634,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":778,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Need a new motor and z-axis Screw","id":5600,"title":"Need a new motor and z-axis Screw","slug":"need-a-new-motor-and-z-axis-screw","posts_count":10,"reply_count":3,"highest_post_number":10,"image_url":"https://storage.3dprintingspace.com/optimized/2X/d/d68918e5286ae468cff987ea5ecad1ca52f634d8_2_768x1024.jpeg","created_at":"2023-04-27T18:14:55.988Z","last_posted_at":"2023-12-03T10:57:31.065Z","bumped":true,"bumped_at":"2023-12-03T10:57:31.065Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, I am a dad whose job it is to fix my kids different 3d Printers.   The latest issue we have is that the LD-006 Resin Printer got “stuck” some how and the Z-axis Screw had some issues.  The bushings now will no longer…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":618,"like_count":1,"has_summary":false,"last_poster_username":"CICERO.CRUZ","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2077,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1860,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2521,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Resin Print Not Sticking","id":7383,"title":"Resin Print Not Sticking","slug":"resin-print-not-sticking","posts_count":9,"reply_count":5,"highest_post_number":9,"image_url":null,"created_at":"2023-11-26T03:29:23.763Z","last_posted_at":"2023-11-30T22:37:45.678Z","bumped":true,"bumped_at":"2023-11-30T22:37:45.678Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m having an issue where prints on a large X/Y scale are not sticking to the print bed. \nI’m using an Elegoo Saturn 3 Ultra, eSun red resin (Standard type), with the following settings in Voxeldance Tango: \n\nBottom Laye…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":714,"like_count":1,"has_summary":false,"last_poster_username":"Tiago","category_id":32,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2478,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":47,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2476,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1842,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Halot Mage Pro / Elegoo Plant Based Grey Resin","id":7249,"title":"Halot Mage Pro / Elegoo Plant Based Grey Resin","slug":"halot-mage-pro-elegoo-plant-based-grey-resin","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":null,"created_at":"2023-10-12T14:14:23.950Z","last_posted_at":"2023-10-14T13:44:50.429Z","bumped":true,"bumped_at":"2023-10-14T13:44:50.429Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, \nI’m having some troouble configuring Lychee Slicer with the correct settings in order to use the Elegoo Plant-Based resin with my Halot Mage Pro. Could someone help me with those settings? \nThanks in advance.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":621,"like_count":0,"has_summary":false,"last_poster_username":"Matthew","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2455,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Liqcreate Tough-X part warpage?","id":7214,"title":"Liqcreate Tough-X part warpage?","slug":"liqcreate-tough-x-part-warpage","posts_count":5,"reply_count":0,"highest_post_number":5,"image_url":null,"created_at":"2023-10-04T21:18:39.457Z","last_posted_at":"2023-10-05T14:31:33.440Z","bumped":true,"bumped_at":"2023-10-05T14:31:33.440Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I like that it has a little flexibility but an trying to print a long, thin tube and it’s “warping” a bit, ie: the tube is flattening somewhat and becoming oblong. \nAny other resin that has a little give but prints bette…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":275,"like_count":0,"has_summary":false,"last_poster_username":"Tiki","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":2437,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster, Accepted Answer","user_id":1489,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Flashforge Adventure 3 lite - bad printing on one side","id":7168,"title":"Flashforge Adventure 3 lite - bad printing on one side","slug":"flashforge-adventure-3-lite-bad-printing-on-one-side","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://storage.3dprintingspace.com/optimized/2X/7/7f2adff819e3153488b6c78607a00118edee7fd8_2_768x1024.jpeg","created_at":"2023-09-22T01:15:41.718Z","last_posted_at":"2023-09-22T17:11:53.427Z","bumped":true,"bumped_at":"2023-09-22T17:11:53.427Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"So I didn’t used my printer for 1 month now, I want to print something with new filament (PLA) also with the right size 1.75mm and same temperature, but if I print he didn’t print accurate. I was testing to print somethi…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":174,"like_count":0,"has_summary":false,"last_poster_username":"Matthew","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2421,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Use in shed against fumes?","id":7106,"title":"Use in shed against fumes?","slug":"use-in-shed-against-fumes","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":null,"created_at":"2023-09-03T18:24:05.775Z","last_posted_at":"2023-09-06T19:48:51.916Z","bumped":true,"bumped_at":"2023-09-06T19:48:51.916Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi there, i wanna buy my son a resin printer. He already has a PLA printer. Problem is that we live small-housed and  I don’t want the risk of the fumes in the house. \nQuestion: do you think it’s possible to use it in a …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":779,"like_count":1,"has_summary":false,"last_poster_username":"Angela","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":2395,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":800,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Elagoo saturn 2 resin toxicity","id":7058,"title":"Elagoo saturn 2 resin toxicity","slug":"elagoo-saturn-2-resin-toxicity","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":null,"created_at":"2023-08-20T01:40:22.158Z","last_posted_at":"2023-08-21T14:19:42.837Z","bumped":true,"bumped_at":"2023-08-21T14:19:42.837Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, first time poster here. \nI’m a emerging artist who likes 3D form and I just got a Saturn 2 resin printer to help with my work. \nI have a studio that I share with 2 other people, on the 6th floor of high rise building…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":297,"like_count":2,"has_summary":false,"last_poster_username":"Jason","category_id":32,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2373,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1245,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":47,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Help with clean up","id":6965,"title":"Help with clean up","slug":"help-with-clean-up","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2023-08-03T00:26:26.045Z","last_posted_at":"2023-08-03T00:26:26.123Z","bumped":true,"bumped_at":"2023-08-03T03:50:10.370Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, I’m new to this forum and Resin 3d printing. I’ve been at it for a few months now, you name it and I’ve probably done it wrong. Because of this I’m doing a hard reset of my 3d printing space and wanted some advice…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":252,"like_count":0,"has_summary":false,"last_poster_username":"BrendanFollick","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2322,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Editing resin gcode","id":6871,"title":"Editing resin gcode","slug":"editing-resin-gcode","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2023-07-20T11:43:35.758Z","last_posted_at":"2023-07-28T17:11:42.624Z","bumped":true,"bumped_at":"2023-07-28T17:11:42.624Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"im trying to do something like gcode editing to a sliced part for resin printing. but i found that the file formats used in resing slicing is not easly edited. \ndoes some one tried to do this befor and have some advice o…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":379,"like_count":0,"has_summary":false,"last_poster_username":"kitedemon","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2279,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":618,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Photon mono x z axis not moving","id":6917,"title":"Photon mono x z axis not moving","slug":"photon-mono-x-z-axis-not-moving","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2023-07-28T15:02:36.446Z","last_posted_at":"2023-07-28T15:42:20.251Z","bumped":true,"bumped_at":"2023-07-28T15:42:20.251Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"So the z axis has just stopped moving. It stopped mid print last night and when trying to move it by 10mm  it didn’t move at all but could hear what I think to be the motor going. If any one has any ideas on how to fix t…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":390,"like_count":0,"has_summary":false,"last_poster_username":"Matthew","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2148,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Creality Halot One Firmware Issue","id":6779,"title":"Creality Halot One Firmware Issue","slug":"creality-halot-one-firmware-issue","posts_count":7,"reply_count":2,"highest_post_number":7,"image_url":null,"created_at":"2023-07-06T04:09:46.125Z","last_posted_at":"2023-07-11T13:45:50.040Z","bumped":true,"bumped_at":"2023-07-11T13:45:50.040Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I bought the Printer through 3D Printing Canada… \nI was advised by others On YouTube Reviews to update the moment I got the printer… Because of Issues It worked fine for a few days then it started Not printing the models…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1642,"like_count":0,"has_summary":false,"last_poster_username":"Jason","category_id":132,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2141,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Resin is not curing at all","id":6621,"title":"Resin is not curing at all","slug":"resin-is-not-curing-at-all","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2023-06-23T14:54:16.538Z","last_posted_at":"2023-06-23T20:39:52.406Z","bumped":true,"bumped_at":"2023-06-23T20:39:52.406Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My printer has been working fine for months but now my resin isn’t curing at all(like nothing not even from a vat clean). I’m not too sure what could be failing I did just buy new resin and my fep isn’t too old either. I…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":325,"like_count":0,"has_summary":false,"last_poster_username":"Jason","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2148,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Prints stick to the vat bottom","id":5616,"title":"Prints stick to the vat bottom","slug":"prints-stick-to-the-vat-bottom","posts_count":7,"reply_count":1,"highest_post_number":7,"image_url":null,"created_at":"2023-05-02T21:06:14.882Z","last_posted_at":"2023-05-08T18:06:59.515Z","bumped":true,"bumped_at":"2023-05-08T18:06:59.515Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"About half way through a print it starts sticking to the bottom of the vat.  I was doing a big print last night and it got about a quarter of the way finished and started sticking to the vat. Even when I do multiple smal…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":507,"like_count":0,"has_summary":false,"last_poster_username":"Matthew","category_id":40,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2082,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":800,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1996,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2004,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Setting up Resin Supports for a new 3D printer","id":5336,"title":"Setting up Resin Supports for a new 3D printer","slug":"setting-up-resin-supports-for-a-new-3d-printer","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://storage.3dprintingspace.com/optimized/2X/2/2bedb39e3519b8c41220c4c9bf9e40210dfcc932_2_1024x576.jpeg","created_at":"2023-02-25T10:34:03.877Z","last_posted_at":"2023-02-25T10:37:24.445Z","bumped":true,"bumped_at":"2023-02-25T10:37:24.445Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":344,"like_count":0,"has_summary":false,"last_poster_username":"Yarkspiri","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":304,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Mars Elegoo motherboard type","id":5227,"title":"Mars Elegoo motherboard type","slug":"mars-elegoo-motherboard-type","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2023-02-03T23:03:42.638Z","last_posted_at":"2023-02-04T02:10:48.557Z","bumped":true,"bumped_at":"2023-02-04T02:10:48.557Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I bought a \nMars ELEGOO Mars 2 Pro Mono MSLA 3D Printer UV Photocuring LCD Resin 3D Printer with 6 inch 2K Monochrome LCD, Printing Size 129 * 80 * 160mm/5.1 * 3.1 * 6.3inch \nI would like to know which motherboard I have…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":442,"like_count":0,"has_summary":false,"last_poster_username":"Michaelviper","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1948,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1946,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Saturn 2 Print failure","id":5165,"title":"Saturn 2 Print failure","slug":"saturn-2-print-failure","posts_count":16,"reply_count":10,"highest_post_number":16,"image_url":null,"created_at":"2023-01-26T16:10:28.676Z","last_posted_at":"2023-01-30T22:44:51.369Z","bumped":true,"bumped_at":"2023-01-30T22:44:51.369Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My Saturn 2 keeps having issues.  I haven’t got it to stick to the bed yet. I’ve sanded it, and increased the exposure time. I’m new to resin printing so I’m not sure what else to do","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":2471,"like_count":5,"has_summary":false,"last_poster_username":"Yarkspiri","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1541,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":304,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"SLA Printer Basics - What are Resin Supports","id":5164,"title":"SLA Printer Basics - What are Resin Supports","slug":"sla-printer-basics-what-are-resin-supports","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://storage.3dprintingspace.com/optimized/2X/5/58eb64c485a9b968eecafc9ad12603c1c4699bb4_2_1024x576.jpeg","created_at":"2023-01-26T10:56:52.560Z","last_posted_at":"2023-01-26T10:57:54.623Z","bumped":true,"bumped_at":"2023-01-26T10:57:54.623Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":299,"like_count":0,"has_summary":false,"last_poster_username":"Yarkspiri","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":304,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"SLA Printer - How to properly clean resin prints","id":4865,"title":"SLA Printer - How to properly clean resin prints","slug":"sla-printer-how-to-properly-clean-resin-prints","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":"https://storage.3dprintingspace.com/optimized/2X/6/6000da783bf6587dc82543fc539c3fc413c55f6b_2_1024x576.jpeg","created_at":"2022-12-03T21:35:13.173Z","last_posted_at":"2023-01-26T10:54:13.255Z","bumped":true,"bumped_at":"2023-01-26T10:54:13.255Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":775,"like_count":3,"has_summary":false,"last_poster_username":"Yarkspiri","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":304,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1904,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"The resin sticks to the bottom of the tub. Mono 4k","id":4994,"title":"The resin sticks to the bottom of the tub. Mono 4k","slug":"the-resin-sticks-to-the-bottom-of-the-tub-mono-4k","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/1/193dc49e1941dfc9e95483f4df323bdfb4aa2819_2_576x1024.jpeg","created_at":"2022-12-31T20:29:47.200Z","last_posted_at":"2022-12-31T20:29:47.261Z","bumped":true,"bumped_at":"2022-12-31T20:29:47.261Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Good day, dear forum members.  I congratulate you on the coming new year, with the hope that it will be better.  I’m contacting you on a whim because of this problem - my brand new anycubic photon mono 4k did its first p…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":250,"like_count":0,"has_summary":false,"last_poster_username":"Nyavodar","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1836,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"3dRS Fast+ Grey","id":3922,"title":"3dRS Fast+ Grey","slug":"3drs-fast-grey","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":"https://storage.3dprintingspace.com/optimized/2X/a/aeb3f9b733a4377efb53b524e14cc3fe4e203623_2_768x1024.jpeg","created_at":"2022-03-17T00:56:05.227Z","last_posted_at":"2022-11-29T20:07:52.037Z","bumped":true,"bumped_at":"2022-11-29T20:07:52.037Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Well having issue with the 3DRS Fast + Grey I tried a few different setting. Mostly started with their website spec, love some help thank you . Forgot using a phrozen sonic mini 4k,","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":398,"like_count":0,"has_summary":false,"last_poster_username":"Marc","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":839,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1768,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Halot - One and 3DRS fast+ resin settings","id":4839,"title":"Halot - One and 3DRS fast+ resin settings","slug":"halot-one-and-3drs-fast-resin-settings","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":null,"created_at":"2022-11-29T17:20:41.490Z","last_posted_at":"2022-11-29T18:16:00.506Z","bumped":true,"bumped_at":"2022-11-29T18:16:00.506Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey Kemot, did you end up finding the settings that worked well with that resin and printer combo?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":458,"like_count":0,"has_summary":false,"last_poster_username":"JJ99","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1768,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":129,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Halot-One and 3DRS FAST+ V2","id":3459,"title":"Halot-One and 3DRS FAST+ V2","slug":"halot-one-and-3drs-fast-v2","posts_count":3,"reply_count":2,"highest_post_number":3,"image_url":null,"created_at":"2022-01-05T15:13:29.168Z","last_posted_at":"2022-01-06T13:30:24.413Z","bumped":true,"bumped_at":"2022-11-29T17:20:41.490Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I was wondering if anyone has used this printer and resin and what settings worked for you?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":617,"like_count":2,"has_summary":false,"last_poster_username":"Kemot","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":129,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Starting your First Resin Print","id":4713,"title":"Starting your First Resin Print","slug":"starting-your-first-resin-print","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":"https://storage.3dprintingspace.com/optimized/2X/3/3df316d220a6b36e8d30e0c7db94b64cd01f1704_2_1024x576.jpeg","created_at":"2022-10-31T21:55:43.895Z","last_posted_at":"2022-11-02T15:24:51.020Z","bumped":true,"bumped_at":"2022-11-02T15:24:51.020Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"For those just learning about printing, this video goes through the process of taking a file and printing it on a resin printer.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":414,"like_count":4,"has_summary":false,"last_poster_username":"Yarkspiri","category_id":32,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":304,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1218,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Halot One slicing","id":4721,"title":"Halot One slicing","slug":"halot-one-slicing","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2022-11-02T00:32:16.388Z","last_posted_at":"2022-11-02T00:32:16.498Z","bumped":true,"bumped_at":"2022-11-02T00:32:16.498Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I just recently picked up a Halot One printer, and tried slicing in Lychee. I noticed that it saved the file not as a ctb file, but rather a cxdlp. \nSearching online I saw a post that mentioned needing to download Halot …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":332,"like_count":0,"has_summary":false,"last_poster_username":"Kilted_Dragon","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":657,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Resin printing Safety Tips - How to do it safely","id":4669,"title":"Resin printing Safety Tips - How to do it safely","slug":"resin-printing-safety-tips-how-to-do-it-safely","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://storage.3dprintingspace.com/optimized/2X/7/70f71401118dbdd79cf36446cef54b6ca7a2009f_2_1024x576.jpeg","created_at":"2022-10-13T04:42:44.912Z","last_posted_at":"2022-10-13T04:42:45.029Z","bumped":true,"bumped_at":"2022-10-13T04:42:45.029Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"For those of you who were wondering what you should know before picking up an SLA printer, this guide will help you by covering the basics.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":305,"like_count":0,"has_summary":false,"last_poster_username":"Yarkspiri","category_id":32,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":304,"primary_group_id":null,"flair_group_id":null}]}]}}