# 3D Printed Upgrades "Mega Thread" **URL:** \ **Category:** High-Quality STL Files for 3D Printing\ **Created:** [September 21, 2022, 6:00pm UTC](https://3dprintingspace.com/t/3d-printed-upgrades-mega-thread/4607 "2022-09-21T18:00:09Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![lauran](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/lauran/32/4205_2.png) [@lauran](https://3dprintingspace.com/u/lauran)\ **Post date:** [September 21, 2022, 6:00pm UTC](https://3dprintingspace.com/t/3d-printed-upgrades-mega-thread/4607/1 "2022-09-21T18:00:09Z")
I am always getting messages from everyone looking for specific .STL files needed to upgrade your printer. So, I’ve created a Mega Thread of .STLs so we can keep them all in one place. Feel free to message me if you have any go to files for specific upgrades so we can make sure they are added to the list! **CR10S Pro V1** Fan Shroud for Micro Swiss Direct Drive [https://www.thingiverse.com/thing:5341202](https://www.thingiverse.com/thing:5341202) **CR10S Pro V2** Fan Shroud for Micro Swiss Direct Drive > **[Fan Shroud for Micro Swiss Direct Drive on CR-10S Pro V2 and CR-10 Max by...](https://www.thingiverse.com/thing:5267414)** > > Fan shroud for installing the Micro Swiss Direct Drive Extruder on the Creality CR-10S Pro V2 or Creality CR-10 Max. > The CR-10 Extruder/Hotend package comes with the 4 finned cooling block. > The CR-10S Pro/CR-10 Max All-Metal hotend comes with the 5... **CR10 Max** Fan Shroud for Micro Swiss Direct Drive > **[Fan Shroud for Micro Swiss Direct Drive on CR-10S Pro V2 and CR-10 Max by...](https://www.thingiverse.com/thing:5267414)** > > Fan shroud for installing the Micro Swiss Direct Drive Extruder on the Creality CR-10S Pro V2 or Creality CR-10 Max. > The CR-10 Extruder/Hotend package comes with the 4 finned cooling block. > The CR-10S Pro/CR-10 Max All-Metal hotend comes with the 5... **Ender 3 Max** Ender 3 Max Remix - Micro Swiss Direct Drive (No Probe) (Made by SATSANA) > **[SATSANA Ender 3 Max Remix - Micro Swiss Direct Drive (No Probe) by BAurelius](https://www.thingiverse.com/thing:4913212)** > > Remixed from - Satsana dual fan remix by BobanaPirate to fit on my Ender-3 Max with the Micro Swiss direct drive extruder. > Changes made: removed the clip that held the cables up above the fan shroud because it interfered with the direct drive... Ender 3 Max Shroud Adapter and PTFE Bracket for Micro Swiss Direct Drive > **[Ender 3 Max Shroud Adapter and PTFE Bracket for Micro Swiss Direct Drive by...](https://www.thingiverse.com/thing:5273992)** > > Fan Shroud Adapter and PTFE Guide Tube Bracket used to install the Micro Swiss Direct Drive Extruder kit on an Ender 3 Max. > The PTFE bracket will align the PTFE tube with the Ender 3 Max filament runout sensor. **Ender 3V2** Ender 3 Remix for Micro - Swiss Direct Drive + BLtouch (Made by SATSANA) _to print successfully be sure to include separate support material_ > **[SATSANA Ender 3 Remix for Micro - Swiss Direct Drive + BLtouch by Juanolo](https://www.thingiverse.com/thing:4408571)** > > It is a remix of https://www.thingiverse.com/thing:4369859 to fit my Micro-Swiss Direct Drive for Ender 3 Pro. > Offset for my extruder: X-45.15 Y-8.28 Z-2.40 > Mount: https://www.thingiverse.com/thing:4170190 ---
**Author:** ![mykepredko](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/mykepredko/32/4027_2.png) [@mykepredko](https://3dprintingspace.com/u/mykepredko)\ **Post date:** [September 21, 2022, 6:54pm UTC](https://3dprintingspace.com/t/3d-printed-upgrades-mega-thread/4607/2 "2022-09-21T18:54:55Z")
Hiya, Just a comment, I repeatedly tried to print the SATSANA Ender 3 Remix for Micro-Swiss Direct drive + BLtouch and wasn’t able to get anything close to successful. The problems occur about 3/4 of the way through the print with the various unsupported bridges. If you are going to print this, I suggest using a printer with a separate extruder for water soluable support material. ---
**Author:** ![Jason](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/jason/32/6148_2.png) [@Jason](https://3dprintingspace.com/u/Jason)\ **Post date:** [September 22, 2022, 1:33pm UTC](https://3dprintingspace.com/t/3d-printed-upgrades-mega-thread/4607/3 "2022-09-22T13:33:05Z")
Just a thought Lauran, if this does get to large we can break it out to a separate section or post up in the printer specific sections. ---
**Author:** ![lauran](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/lauran/32/4205_2.png) [@lauran](https://3dprintingspace.com/u/lauran)\ **Post date:** [September 22, 2022, 1:54pm UTC](https://3dprintingspace.com/t/3d-printed-upgrades-mega-thread/4607/4 "2022-09-22T13:54:59Z")
That sounds like a good plan. ✔