# 3DPC help! K1 max nozzle info

**URL:** <https://3dprintingspace.com/t/3dpc-help-k1-max-nozzle-info/9764>\
**Category:** General Discussion\
**Created:** [January 2, 2025, 8:00pm UTC](https://3dprintingspace.com/t/3dpc-help-k1-max-nozzle-info/9764 "2025-01-02T20:00:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Loosenut](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/loosenut/32/3612_2.png) [@Loosenut](https://3dprintingspace.com/u/Loosenut)\
**Post date:** [January 2, 2025, 8:00pm UTC](https://3dprintingspace.com/t/3dpc-help-k1-max-nozzle-info/9764/1 "2025-01-02T20:00:47Z")

</div>

Is the K1 MAX unicorn nozzle the same as the K1C that is shown on the 3DPC website or is it different.

> **[Creality K1C Unicorn Quick Swap Nozzle Kit - 3D Printing Canada](https://3dprintingcanada.com/products/official-creality-k1c-quick-swap-nozzle-kit)**
>
> Price: CAD 71.96

Which silicon sock goes with them on the Unicorn hotend.

Any idea what the life expectancy of these nozzles and socks is.

---

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [January 3, 2025, 2:29am UTC](https://3dprintingspace.com/t/3dpc-help-k1-max-nozzle-info/9764/2 "2025-01-03T02:29:25Z")

</div>

I can’t speak to that exact nozzle but I was swapping nozzles every 4-10 kg when I was running brass. I switched to E3D XNozzles on everything and have not worn one out. The oldest is 3 or 4 years I lost track. 100s of kgs for sure. Even if it is ½ as robust and twice the price a good hardened steel nozzle will out perform brass.

The only issue is you may need to heat soak it.

Socks get hard and dirty I go through one every 8 months give or take.

You might be better off with a CHG style high flow over an volcano. Just a thought
