# A Cura 4 to Cura 5 difrence

**URL:** <https://3dprintingspace.com/t/a-cura-4-to-cura-5-difrence/4373>\
**Category:** General Discussion\
**Created:** [June 30, 2022, 1:17pm UTC](https://3dprintingspace.com/t/a-cura-4-to-cura-5-difrence/4373 "2022-06-30T13:17:26Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Loosenut](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/loosenut/32/3612_2.png) [@Loosenut](https://3dprintingspace.com/u/Loosenut)\
**Post date:** [June 30, 2022, 1:17pm UTC](https://3dprintingspace.com/t/a-cura-4-to-cura-5-difrence/4373/1 "2022-06-30T13:17:26Z")

</div>

In Cura 4.xx when it positions the seam it is usually a fine line, unless you randomize it. I just did two of prints of the same part in 5 and instead of that neat line it is a bit wobbly and spread out? Changing the positioning settings (not the randomize setting) doesn’t make any difference.

Right out of the “Outer limits”.