# About the 3D Printing News category

**URL:** <https://3dprintingspace.com/t/about-the-3d-printing-news-category/28>\
**Category:** 3D Printing News\
**Created:** [January 25, 2021, 9:54pm UTC](https://3dprintingspace.com/t/about-the-3d-printing-news-category/28 "2021-01-25T21:54:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![tony](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/tony/32/218_2.png) [@tony](https://3dprintingspace.com/u/tony)\
**Post date:** [January 25, 2021, 9:54pm UTC](https://3dprintingspace.com/t/about-the-3d-printing-news-category/28/1 "2021-01-25T21:54:29Z")

</div>

Discuss the topics around the globe and/or your local communities that have impacted the 3D printing world

---

<div class="post-metadata">

**Author:** ![Mikie](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/m/e9bcb4/32.png) [@Mikie](https://3dprintingspace.com/u/Mikie)\
**Post date:** [May 11, 2021, 10:09pm UTC](https://3dprintingspace.com/t/about-the-3d-printing-news-category/28/2 "2021-05-11T22:09:20Z")

</div>

I have an issue with the bed heater. I was printing PETG and it may have being to hot. The bed temp was set at 85. The nozzle was set at 255. The bed heater will not activate and the alarm goes off and shuts the machine down. It all was working fine up to this point. I’ve unplugged power and restart, but still the alarm goes off and shuts down. Any help would be appreciated.

---

<div class="post-metadata">

**Author:** ![browide3d](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/b/8c91f0/32.png) [@browide3d](https://3dprintingspace.com/u/browide3d)\
**Post date:** [September 11, 2025, 6:42am UTC](https://3dprintingspace.com/t/about-the-3d-printing-news-category/28/3 "2025-09-11T06:42:42Z")

</div>

Just desolder your alarm bro. Easy fix. if you want us to print your part. WE provide [3D Printing in Pakistan](https://browide3d.pk/)
