# About the Creality CR-10 Smart/Smart Pro category

**URL:** <https://3dprintingspace.com/t/about-the-creality-cr-10-smart-smart-pro-category/5074>\
**Category:** Creality CR-10 Smart/Smart Pro\
**Created:** [January 18, 2023, 1:14pm UTC](https://3dprintingspace.com/t/about-the-creality-cr-10-smart-smart-pro-category/5074 "2023-01-18T13:14:24Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![chris](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/chris/32/1090_2.png) [@chris](https://3dprintingspace.com/u/chris)\
**Post date:** [January 18, 2023, 1:14pm UTC](https://3dprintingspace.com/t/about-the-creality-cr-10-smart-smart-pro-category/5074/1 "2023-01-18T13:14:24Z")

</div>

This Tree of our Forum is dedicated to questions comments, Problems and concerns about the Creality CR-10 Smart/Smart Pro 3D printer.

Feel free to post here, It will show up in the general thread tracker so anyone may respond.

---

<div class="post-metadata">

**Author:** ![chris](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/chris/32/1090_2.png) [@chris](https://3dprintingspace.com/u/chris)\
**Post date:** [January 18, 2023, 2:05pm UTC](https://3dprintingspace.com/t/about-the-creality-cr-10-smart-smart-pro-category/5074/2 "2023-01-18T14:05:30Z")

</div>



---

<div class="post-metadata">

**Author:** ![Jason](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/jason/32/6148_2.png) [@Jason](https://3dprintingspace.com/u/Jason)\
**Post date:** [January 24, 2023, 3:53pm UTC](https://3dprintingspace.com/t/about-the-creality-cr-10-smart-smart-pro-category/5074/3 "2023-01-24T15:53:11Z")

</div>



---

<div class="post-metadata">

**Author:** ![Irakandjii](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/i/6a8cbe/32.png) [@Irakandjii](https://3dprintingspace.com/u/Irakandjii)\
**Post date:** [April 4, 2026, 3:58pm UTC](https://3dprintingspace.com/t/about-the-creality-cr-10-smart-smart-pro-category/5074/4 "2026-04-04T15:58:43Z")

</div>

Hi I have a Creality CR-10 Smart Pro with a Sonic Pad.

Recently, the printer stops mid print and the Sonic Pad reports printing is paused.

I am unable to unpause the print. I am stuck in a endless loop of pressing unpause. I could not software quit the print either.

After a forced shutdown (power off) I checked for blockage etc and could find no blockage or physical / electrical faults. I am not sure if it is the printer or the pad.

Anyone have any ideas on what the problem might be?

Opps, I am not familiar with forums. I seem to have put this in the wrong place. Not sure how to correct my error