# Bad Bambu Lab Filament

**URL:** <https://3dprintingspace.com/t/bad-bambu-lab-filament/9424>\
**Category:** General Discussion\
**Created:** [September 19, 2024, 2:49pm UTC](https://3dprintingspace.com/t/bad-bambu-lab-filament/9424 "2024-09-19T14:49:07Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Matthew](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/matthew/32/7552_2.png) [@Matthew](https://3dprintingspace.com/u/Matthew)\
**Post date:** [September 19, 2024, 2:49pm UTC](https://3dprintingspace.com/t/bad-bambu-lab-filament/9424/1 "2024-09-19T14:49:07Z")

</div>

Found this today on a roll of BambuLabs matte PLA, there was a chunk of black garbage in the middle of the filament which was causing it to be extremely brittle. Just wanted to throw this out there, filament manufacturing is still more of an art than a science. Even the big companies stuff it up sometimes!

 ![IMG_8904.HEIC](https://storage.3dprintingspace.com/original/2X/6/6e31d803909779fb108f5c7c9f64837399e7a0d5.jpeg)  
 ![IMG_8905.HEIC](https://storage.3dprintingspace.com/original/2X/5/52a845d8ae9df475daadffe27f6cfd27d3d5cad4.jpeg)

Just thought this was an interesting discovery, haven’t seen an extrusion defect as bad as this one in quite some time, but they definitely still happen

---

<div class="post-metadata">

**Author:** ![Loosenut](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/loosenut/32/3612_2.png) [@Loosenut](https://3dprintingspace.com/u/Loosenut)\
**Post date:** [September 21, 2024, 5:55pm UTC](https://3dprintingspace.com/t/bad-bambu-lab-filament/9424/2 "2024-09-21T17:55:45Z")

</div>

Velly, Velly Strange. If it is a bog standard white filament why would there be black in it???

---

<div class="post-metadata">

**Author:** ![3DP](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/3/848f3c/32.png) [@3DP](https://3dprintingspace.com/u/3DP)\
**Post date:** [September 24, 2024, 1:15pm UTC](https://3dprintingspace.com/t/bad-bambu-lab-filament/9424/3 "2024-09-24T13:15:53Z")

</div>

Thank you for sharing, kind sir
