# Build a new release of Marlin

**URL:** <https://3dprintingspace.com/t/build-a-new-release-of-marlin/4348>\
**Category:** 3D Printer Firmware\
**Created:** [June 20, 2022, 11:15pm UTC](https://3dprintingspace.com/t/build-a-new-release-of-marlin/4348 "2022-06-20T23:15:44Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![era99](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/e/7ab992/32.png) [@era99](https://3dprintingspace.com/u/era99)\
**Post date:** [June 20, 2022, 11:15pm UTC](https://3dprintingspace.com/t/build-a-new-release-of-marlin/4348/1 "2022-06-20T23:15:44Z")

</div>

I’ve previously built Marlin 2.0.9.3 for my Ender 3 Max, and have been using it for a while.  
I want to re-flash the printer, but would like to update to the 2.1.x release.  
Does anyone have experience upgrading Marlin versions on a build?  
Can I just copy over top? Do a completely new build?

Thanks!

---

<div class="post-metadata">

**Author:** ![mykepredko](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/mykepredko/32/4027_2.png) [@mykepredko](https://3dprintingspace.com/u/mykepredko)\
**Post date:** [June 21, 2022, 12:32am UTC](https://3dprintingspace.com/t/build-a-new-release-of-marlin/4348/2 "2022-06-21T00:32:32Z")

</div>

My approach is to copy in the later version of Marlin into a new folder and then do a kdiff to look at the differences in the configuration files and make changes where appropriate to maintain my settings.

---

<div class="post-metadata">

**Author:** ![era99](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/e/7ab992/32.png) [@era99](https://3dprintingspace.com/u/era99)\
**Post date:** [June 22, 2022, 2:34pm UTC](https://3dprintingspace.com/t/build-a-new-release-of-marlin/4348/3 "2022-06-22T14:34:13Z")

</div>

Thanks.  
My concern was that I would lose some important setting when doing the new version.
