# Buying a new 3d printer

**URL:** <https://3dprintingspace.com/t/buying-a-new-3d-printer/5020>\
**Category:** 3D Printers\
**Created:** [January 5, 2023, 7:12pm UTC](https://3dprintingspace.com/t/buying-a-new-3d-printer/5020 "2023-01-05T19:12:55Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jeanh](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/73ab20/32.png) [@jeanh](https://3dprintingspace.com/u/jeanh)\
**Post date:** [January 5, 2023, 7:12pm UTC](https://3dprintingspace.com/t/buying-a-new-3d-printer/5020/1 "2023-01-05T19:12:55Z")

</div>

Hello everybody, help me to find a 3d printer for less than 3000$  
I’m looking for buying or modify my ender 6 to print ENGINEERING FILAMENTS  
300_300_400mm Build Size  
CORE XY FULLY heated ENCLOSED  
Linear Rails  
Dual Independent direct Extruders Hotend 500C  
Filament Runout Sensor  
Power Loss Recovery  
heated bed 120C  
Magnetic Flexible PEI Sheet  
Auto Bed & Gantry Leveling  
7in touchscreen  
HEPA Air Filtration  
Advanced 32bit electronics with web control interface

thank you for any idea

Jean , de Val-dOr

---

<div class="post-metadata">

**Author:** ![Jdevidnx](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/47e85d/32.png) [@Jdevidnx](https://3dprintingspace.com/u/Jdevidnx)\
**Post date:** [February 7, 2023, 7:55am UTC](https://3dprintingspace.com/t/buying-a-new-3d-printer/5020/2 "2023-02-07T07:55:57Z")

</div>

I have an Dual Extruder 3D printer from [here](https://43dprint.org/dual-extruder-3d-printer/). Easy to set up, easy to print, and low cost in my opinion. It’s like dummy proofing 3d printing. The only time I’ve had a print fail is when I didn’t take the time to check the bed level before starting.