# CR-6 SE USB problems

**URL:** <https://3dprintingspace.com/t/cr-6-se-usb-problems/82>\
**Category:** Creality CR-6 SE\
**Created:** [January 26, 2021, 7:25pm UTC](https://3dprintingspace.com/t/cr-6-se-usb-problems/82 "2021-01-26T19:25:51Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![Verdna](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/v/a88e4f/32.png) [@Verdna](https://3dprintingspace.com/u/Verdna)\
**Post date:** [February 8, 2021, 1:49am UTC](https://3dprintingspace.com/t/cr-6-se-usb-problems/82/9 "2021-02-08T01:49:23Z")

</div>

I had my CR-6 SE and had no problem. It is true that I didn’t use the USB port but I know I need to remove the 5V power. I am still at firmware 1.0.2. I hesitate to switch to community firmware because I have no problem. Not sure if the benefits are worth the risks?

---

_[View the full topic](https://3dprintingspace.com/t/cr-6-se-usb-problems/82)._