# CR-M4 Slicer Profile Settings

**URL:** <https://3dprintingspace.com/t/cr-m4-slicer-profile-settings/6553>\
**Category:** General Discussion\
**Created:** [June 6, 2023, 6:03pm UTC](https://3dprintingspace.com/t/cr-m4-slicer-profile-settings/6553 "2023-06-06T18:03:31Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![lauran](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/lauran/32/4205_2.png) [@lauran](https://3dprintingspace.com/u/lauran)\
**Post date:** [June 6, 2023, 6:03pm UTC](https://3dprintingspace.com/t/cr-m4-slicer-profile-settings/6553/1 "2023-06-06T18:03:31Z")

</div>

Hi Everyone  
I’ve been getting this question a lot and there does not seem to be a straight answer available online.

For the CR-M4 - is there a stock slicer profile in Creality Slicer or Cura?

If not, which one can you use, and what needs to be changed to it to make it work with the CR-M4?

---

<div class="post-metadata">

**Author:** ![Jamedds](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/cc9497/32.png) [@Jamedds](https://3dprintingspace.com/u/Jamedds)\
**Post date:** [June 7, 2023, 3:54am UTC](https://3dprintingspace.com/t/cr-m4-slicer-profile-settings/6553/2 "2023-06-07T03:54:58Z")

</div>

Creality Cloud can store the slice profile. You should remote your CR-M4 by Creality Cloud

---

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [June 7, 2023, 10:19am UTC](https://3dprintingspace.com/t/cr-m4-slicer-profile-settings/6553/3 "2023-06-07T10:19:18Z")

</div>

@lauran I don’t think there is one yet. There is this guide however, although I have not personally used it. User beware.

> **[CR M4 Cura Profile & Tips for Using Cura Slicer and Creality Slicer](https://www.smith3d.com/cr-m4-cura-profile-tips-for-using-cura-slicer/)**
>
> Creality's latest addition to their 3D printer lineup, the CR-M4, boasts a large build volume of 450 x 450 x 470mm, making it an ideal workhorse for creating large models with minimal or no post…

---

<div class="post-metadata">

**Author:** ![Jason](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/jason/32/6148_2.png) [@Jason](https://3dprintingspace.com/u/Jason)\
**Post date:** [June 9, 2023, 6:36pm UTC](https://3dprintingspace.com/t/cr-m4-slicer-profile-settings/6553/4 "2023-06-09T18:36:57Z")

</div>

Just created one you can download,

One for Cura and one for Prusa

> [@CR-M4 Cura Profile](https://3dprintingspace.com/t/cr-m4-cura-profile/6574):
>
> For the Printer setup, I used a CR-10 Max and updated the retractions from 6.5 to .5mm The printing profile is located [here](https://drive.google.com/file/d/1fK0I1No7UMWG2uFG472ehColidYZb6OK/view?usp=sharing)

---

<div class="post-metadata">

**Author:** ![lauran](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/lauran/32/4205_2.png) [@lauran](https://3dprintingspace.com/u/lauran)\
**Post date:** [June 9, 2023, 6:50pm UTC](https://3dprintingspace.com/t/cr-m4-slicer-profile-settings/6553/5 "2023-06-09T18:50:44Z")

</div>

Thanks Jason!