# CR-X Pro Micro SD Card Question

**URL:** <https://3dprintingspace.com/t/cr-x-pro-micro-sd-card-question/9914>\
**Category:** 3D Printer Parts\
**Created:** [February 11, 2025, 8:54am UTC](https://3dprintingspace.com/t/cr-x-pro-micro-sd-card-question/9914 "2025-02-11T08:54:41Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Carlosk12](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/c/dc4da7/32.png) [@Carlosk12](https://3dprintingspace.com/u/Carlosk12)\
**Post date:** [February 11, 2025, 8:54am UTC](https://3dprintingspace.com/t/cr-x-pro-micro-sd-card-question/9914/1 "2025-02-11T08:54:41Z")

</div>

I need a new micro sd card for my Creality CR-X pro and i was wondering if you need to have a netac card or is it just recommended?  
Thank you in advance.

---

<div class="post-metadata">

**Author:** ![Loosenut](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/loosenut/32/3612_2.png) [@Loosenut](https://3dprintingspace.com/u/Loosenut)\
**Post date:** [February 11, 2025, 2:23pm UTC](https://3dprintingspace.com/t/cr-x-pro-micro-sd-card-question/9914/2 "2025-02-11T14:23:55Z")

</div>

Did the manufacturer recommend it?

---

<div class="post-metadata">

**Author:** ![Den](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/d/ce7236/32.png) [@Den](https://3dprintingspace.com/u/Den)\
**Post date:** [February 11, 2025, 3:18pm UTC](https://3dprintingspace.com/t/cr-x-pro-micro-sd-card-question/9914/3 "2025-02-11T15:18:12Z")

</div>

You should be able to use any standard micro sd card with your printer.

---

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [February 12, 2025, 11:03am UTC](https://3dprintingspace.com/t/cr-x-pro-micro-sd-card-question/9914/4 "2025-02-12T11:03:38Z")

</div>

I’ll just add any manufacturer will work the format may need to be altered, although unlikely. I would recommend staying under 16 GB. some printers will run larger even 128 GB but not all. 16 should work in every printer.

---

<div class="post-metadata">

**Author:** ![Carlosk12](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/c/dc4da7/32.png) [@Carlosk12](https://3dprintingspace.com/u/Carlosk12)\
**Post date:** [February 12, 2025, 6:10pm UTC](https://3dprintingspace.com/t/cr-x-pro-micro-sd-card-question/9914/5 "2025-02-12T18:10:31Z")

</div>

Are there any other specs required and thank you so much, this was a big help