# CR6SE help with slicing files on the prusa slicer

**URL:** <https://3dprintingspace.com/t/cr6se-help-with-slicing-files-on-the-prusa-slicer/307>\
**Category:** Prusa3D Slicer\
**Created:** [February 3, 2021, 4:22pm UTC](https://3dprintingspace.com/t/cr6se-help-with-slicing-files-on-the-prusa-slicer/307 "2021-02-03T16:22:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![SonsSabers](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/s/e95f7d/32.png) [@SonsSabers](https://3dprintingspace.com/u/SonsSabers)\
**Post date:** [February 3, 2021, 4:22pm UTC](https://3dprintingspace.com/t/cr6se-help-with-slicing-files-on-the-prusa-slicer/307/1 "2021-02-03T16:22:56Z")

</div>

I have a Cr6 se, I have been using cura 4.8 to slice all my prints but I like some of the ease of the prusa slicer… thing is I can’t seem to have identical stl files print remotely the same.

Cura ones come out relatively great… anything from pursa look like crap… and as far as I can tell the settings are all the same…

Does anyone have good pursa slicer settings for the cr6 se?

Thanks

---

<div class="post-metadata">

**Author:** ![keithywhites](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/keithywhites/32/124_2.png) [@keithywhites](https://3dprintingspace.com/u/keithywhites)\
**Post date:** [February 3, 2021, 4:27pm UTC](https://3dprintingspace.com/t/cr6se-help-with-slicing-files-on-the-prusa-slicer/307/2 "2021-02-03T16:27:34Z")

</div>

did you input all your own settings? prusaslicer has creality presets, although i didn’t see the cr6, there may be one in the list that works with your machine. go to configuration wizard, other vendors, creality, then check out the CR family of printers they have there. hope they work.