# Creality bed mesh

**URL:** <https://3dprintingspace.com/t/creality-bed-mesh/10262>\
**Category:** General Discussion\
**Created:** [October 29, 2025, 7:32pm UTC](https://3dprintingspace.com/t/creality-bed-mesh/10262 "2025-10-29T19:32:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Loosenut](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/loosenut/32/3612_2.png) [@Loosenut](https://3dprintingspace.com/u/Loosenut)\
**Post date:** [October 29, 2025, 7:32pm UTC](https://3dprintingspace.com/t/creality-bed-mesh/10262/1 "2025-10-29T19:32:01Z")

</div>

Creality print, by itself, does not have a bed mesh display. If you access your printer thru a browser by imputing your printer IP address into the browser then Creality Print comes up and there is a bed mesh display, An one know why???

---

<div class="post-metadata">

**Author:** ![dkerrivan](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/dkerrivan/32/6279_2.png) [@dkerrivan](https://3dprintingspace.com/u/dkerrivan)\
**Post date:** [November 1, 2025, 2:20am UTC](https://3dprintingspace.com/t/creality-bed-mesh/10262/2 "2025-11-01T02:20:59Z")

</div>

Not a clue. I basically bypassed the onboard wifi/network board in my CR10 Smart Pro, and use the USB C cable to connect my RPi 5 to it, and I use OctoPrint to get my bed mesh display.

I _really_ don’t like Creatlity’s clear disregard to your design being owned by you ( Yah, I read the EULA, and I disagreed with the terms). I use the hardware, and none of their badged software. The hardware’s decent enough, and until last week, I was chugging along nicely enough (topic for another post that’s coming).