# Creality Print Pause at height

**URL:** <https://3dprintingspace.com/t/creality-print-pause-at-height/9573>\
**Category:** General Discussion\
**Created:** [November 6, 2024, 8:10pm UTC](https://3dprintingspace.com/t/creality-print-pause-at-height/9573 "2024-11-06T20:10:55Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Loosenut](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/loosenut/32/3612_2.png) [@Loosenut](https://3dprintingspace.com/u/Loosenut)\
**Post date:** [November 6, 2024, 8:10pm UTC](https://3dprintingspace.com/t/creality-print-pause-at-height/9573/1 "2024-11-06T20:10:55Z")

</div>

If you move the layer bar, right side of the model, up or down and right click on it there is a “change filament” command. Is this a pause so that the filament can be changed during a print like the “pause at height” G code addition in cura.

---

<div class="post-metadata">

**Author:** ![Matthew](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/matthew/32/7552_2.png) [@Matthew](https://3dprintingspace.com/u/Matthew)\
**Post date:** [November 6, 2024, 8:21pm UTC](https://3dprintingspace.com/t/creality-print-pause-at-height/9573/2 "2024-11-06T20:21:11Z")

</div>

> [@Multicolor Prints On The Creality K1/K1 Max](https://3dprintingspace.com/t/multicolor-prints-on-the-creality-k1-k1-max/8045):
>
> Hi everyone, I have been doing some experimenting with color swaps mid print using the K1 series printers and I have been having lots of questions about how to do this from customers. So I decided I would make a post here to show everyone the process I do this with. For the purposes of this tutorial I will stick with using Creality Print, but this process can also be done using basically any other slicer. If anyone would like details regarding how to do it with a certain slicer please let me k…

This should be generally the same process. Creality print 5.0 might do it a little bit differently now, not entirely sure. If you want me to make an updated version using 5.0 just let me know and I will try and get something out for you!

---

<div class="post-metadata">

**Author:** ![Loosenut](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/loosenut/32/3612_2.png) [@Loosenut](https://3dprintingspace.com/u/Loosenut)\
**Post date:** [November 6, 2024, 11:25pm UTC](https://3dprintingspace.com/t/creality-print-pause-at-height/9573/3 "2024-11-06T23:25:10Z")

</div>

It might help. I’m pretty slow.

I wonder why creality hasn’t put an automatic feature in creality print like there is in Cura, It makes this very quick and simple.

---

<div class="post-metadata">

**Author:** ![Loosenut](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/loosenut/32/3612_2.png) [@Loosenut](https://3dprintingspace.com/u/Loosenut)\
**Post date:** [November 7, 2024, 7:42pm UTC](https://3dprintingspace.com/t/creality-print-pause-at-height/9573/4 "2024-11-07T19:42:39Z")

</div>

I did a little research and found out that both Creality Print and Orca, current versions, do have a very simple pause and/or filament change. No g-code editing to do either. In Creality Print right click the layer slider, in prepare it has a filament change button but in preview it has a pause button. Orca has the same or similar settings. This simplify’s things.