# Detergent to water ratio

**URL:** <https://3dprintingspace.com/t/detergent-to-water-ratio/9498>\
**Category:** General Discussion\
**Created:** [October 6, 2024, 9:55am UTC](https://3dprintingspace.com/t/detergent-to-water-ratio/9498 "2024-10-06T09:55:01Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![NickGarai](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/n/ec9cab/32.png) [@NickGarai](https://3dprintingspace.com/u/NickGarai)\
**Post date:** [October 6, 2024, 9:55am UTC](https://3dprintingspace.com/t/detergent-to-water-ratio/9498/1 "2024-10-06T09:55:02Z")

</div>

What ratio of detergent to water should I be using for cleaning Resin models on my Halot Mage Resin printer?

---

<div class="post-metadata">

**Author:** ![fcpr](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/f/46a35a/32.png) [@fcpr](https://3dprintingspace.com/u/fcpr)\
**Post date:** [October 11, 2024, 12:40pm UTC](https://3dprintingspace.com/t/detergent-to-water-ratio/9498/2 "2024-10-11T12:40:08Z")

</div>

Are you talking about cleaning your models after printing? Are you using a water-washable resin or a standard one?  
If you are using a standard resin, the best way to remove excess resin from your model is to use IPO. If you don’t have a washing machine, you can put IPO in a container and place your models in it for a few minutes.  
But be careful. IPO is toxic. Also, don’t leave your models in IPO for a long time because it will dissolve not only the excess resin but the models itself. For small models, keep them in the IPO for 2 or 3 minutes. For large models, you can let them in the IPO for a longer time. The best way is to experiment. Remove the model from the IPO and take a look at it and see if the excess resin was washed away.  
I don’t have experience with water-washable resins. Maybe someone in the forum will help you with that.

---

<div class="post-metadata">

**Author:** ![NickGarai](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/n/ec9cab/32.png) [@NickGarai](https://3dprintingspace.com/u/NickGarai)\
**Post date:** [October 11, 2024, 1:01pm UTC](https://3dprintingspace.com/t/detergent-to-water-ratio/9498/3 "2024-10-11T13:01:09Z")

</div>

I am referring to washing the models after printing. I am using Jang He resin.

---

<div class="post-metadata">

**Author:** ![Matthew](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/matthew/32/7552_2.png) [@Matthew](https://3dprintingspace.com/u/Matthew)\
**Post date:** [October 17, 2024, 1:57pm UTC](https://3dprintingspace.com/t/detergent-to-water-ratio/9498/4 "2024-10-17T13:57:28Z")

</div>

Do not use any sort of detergent when washing water washable resin, use the cleanest water you can possibly get. Usually I just go for distilled water because it is cheap and easily accessible.

For normal resin do not water down the IPA, you will want ideally a 95-99% concentration IPA for your wash. If you are using our model wash concentrate then the ideal dilution is 125ml of concentrate per 4L of water.
