# Empty spool weights

**URL:** <https://3dprintingspace.com/t/empty-spool-weights/1514>\
**Category:** Filament 3D Printer Technical Help\
**Created:** [February 10, 2021, 8:53am UTC](https://3dprintingspace.com/t/empty-spool-weights/1514 "2021-02-10T08:53:21Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [February 10, 2021, 8:53am UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/1 "2021-02-10T08:53:21Z")

</div>

This is lifted from ‘So you have run out of …’ thread by (@gondolin).

3D Printing Canada Euro Line Spool: 225g (@Keith )

3D Printing Canada NEAT Line Early 2020 Spool: 240g (@Keith )

3D Printing Canada Standard Line Spool 240 g ( @Keith )

3D Printing Canada Value Line Early 2020 Spool: 230g (@Keith )

3D Printing Canada Value Line Late 2020 Spool: 230g (@Keith )

Amz3d 224g (@mobiobi )

Canadian Maker 328 g (Kitedemon)

Creality 200g Spool: 104g (@Keith)

Dupont Clear 1kg 360g (@Amiro62)

Esun Black 0.5kg 212 g (@Amiro62)

eSun Clear 210 g ( Thanks to @Amiro62)

eSun Black 230 g (@Amiro62)

eSun Clear .5kg 203g (@Amiro62)

eSun Nylon, CF-Pa Spools, Clear w/Bolt together : 220g (@Keith )

Eurekatec (3d printed-laser cut mdf) 242g (@kitedemon )

Geeetech 182 g black (Kitedemon)

Geeetech 233gm ‘cubes pattern’ (@Keith)

Hello3D (rainbow label) 210g (kitedemon)

MG Chemicals Black “Narrow” 1Kg: 239g (@Keith )

MG Chemicals Black “Wide” 1Kg: 250g (@Keith )

MG Chemicals Black 200G: 136g (@Keith )

MG Chemicals Cardboard 1Kg: ~150g (@Keith )

Nefila “Recycled filament” reusable Spool: 130g (@Keith )

Priline 206 g (Kitedemon)

Sakata Clear Spool: 240g (@Keith )

Sakata Grey Spool: 205g (@Keith )

Solutech black spool: 218g (@kitedemon)

SunLu Black 1Kg: ~220g (@Keith )

SunLu Clear “Lightweight” 1Kg: 139g (@Keith )

True Food safe PLA (3dpn) 250g (Kitedemon)

3D Printing Canada Budget Spool: 126g (@lauran)

Hopefully we can keep adding weights. It might help others to figure how much filament is left on a roll. 🕶

---

<div class="post-metadata">

**Author:** ![Keith](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/keith/32/92_2.png) [@Keith](https://3dprintingspace.com/u/Keith)\
**Post date:** [February 10, 2021, 6:46pm UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/2 "2021-02-10T18:46:10Z")

</div>

3D Printing Canada Standard Line Spool: 240g

3D Printing Canada Euro Line Spool: 225g

3D Printing Canada Value Line Early 2020 Spool: 230g

3D Printing Canada Value Line Late 2020 Spool: 230g

3D Printing Canada NEAT Line Early 2020 Spool: 240g

3DXTech Black Spools:

3DXTech “200g” Red Spools:

Creality 1KG Spool:

Creality 200g Spool: 104g

eSun Nylon, CF-Pa Spools, Clear w/Bolt together : 220g

Hello3D Spool:

GeeeTech 1KG Spools “Cubes pattern” : 233g

Materio3D Spool:

MG Chemicals Black “Narrow” 1Kg: 239g

MG Chemicals Black “Wide” 1Kg: 250g

MG Chemicals Black 200G: 136g

MG Chemicals Cardboard 1Kg: ~150g

Nefila “Recycled filament” reusable Spool: 130g

Recreus Clear Spool: 240g

Sakata Clear Spool: 253g

Sakata Grey Spool: 205g

SunLu Black 1Kg: ~220g

SunLu Clear “Lightweight” 1Kg: 139g

---

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [February 10, 2021, 7:01pm UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/3 "2021-02-10T19:01:31Z")

</div>

Awesome! I’ll just keep adding them !

---

<div class="post-metadata">

**Author:** ![Keith](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/keith/32/92_2.png) [@Keith](https://3dprintingspace.com/u/Keith)\
**Post date:** [February 12, 2021, 10:54pm UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/4 "2021-02-12T22:54:04Z")

</div>



---

<div class="post-metadata">

**Author:** ![LEGOManiac](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/l/ba8739/32.png) [@LEGOManiac](https://3dprintingspace.com/u/LEGOManiac)\
**Post date:** [February 15, 2021, 12:11pm UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/5 "2021-02-15T12:11:17Z")

</div>

Now if only I had an accurate scale, I could give you some Geeetech numbers.

---

<div class="post-metadata">

**Author:** ![Keith](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/keith/32/92_2.png) [@Keith](https://3dprintingspace.com/u/Keith)\
**Post date:** [February 15, 2021, 6:33pm UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/6 "2021-02-15T18:33:30Z")

</div>

GeeeTech 1KG Spools “Cubes pattern” : 233g

---

<div class="post-metadata">

**Author:** ![Amiro62](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/amiro62/32/732_2.png) [@Amiro62](https://3dprintingspace.com/u/Amiro62)\
**Post date:** [February 15, 2021, 6:59pm UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/7 "2021-02-15T18:59:29Z")

</div>

ESun Clear .5kg 203g  
ESun Black .5kg 212g  
Dupont Clear 1kg 360g

---

<div class="post-metadata">

**Author:** ![mobiobi](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/mobiobi/32/7960_2.png) [@mobiobi](https://3dprintingspace.com/u/mobiobi)\
**Post date:** [February 22, 2021, 8:14pm UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/8 "2021-02-22T20:14:59Z")

</div>

(AMZ3D 1kg, 224g…)

---

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [February 26, 2021, 3:07am UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/9 "2021-02-26T03:07:57Z")

</div>

I just finished a 15 hour print. I had weighed the part roll of Amz3D and Based on @mobiobi weight figured I had what I needed. I did finish the print with around 35g left. 19g less than I calculated but given scales water absorption and a 100 variables I am not thinking of that seems really reasonable. Thanks gang! That helped I didn’t think there was enough on that spool.

---

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [March 1, 2021, 7:11pm UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/10 "2021-03-01T19:11:32Z")

</div>

I sorted this alphabetically and added one.

---

<div class="post-metadata">

**Author:** ![bd43](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/b/d26b3c/32.png) [@bd43](https://3dprintingspace.com/u/bd43)\
**Post date:** [April 12, 2021, 4:02pm UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/11 "2021-04-12T16:02:51Z")

</div>

IIID Max PLA+ spool 216g, density of filament 1.24 g/cm3

---

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [April 12, 2021, 4:44pm UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/12 "2021-04-12T16:44:39Z")

</div>

Thanks @bd43 the form has locked the top so it is no longer editable. I am talking with Keith to figure out something. Stay tuned!

---

<div class="post-metadata">

**Author:** ![Keith](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/keith/32/92_2.png) [@Keith](https://3dprintingspace.com/u/Keith)\
**Post date:** [April 12, 2021, 6:22pm UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/13 "2021-04-12T18:22:37Z")

</div>

@kitedemon  
Alex,

Please just cut and Paste all the data into a new reply with all the updated weights.

I’ll mark it as “Solution” so it’ll quick link to the new post.

If I Make the post, only myself or higher can edit it.

---

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [April 12, 2021, 6:26pm UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/14 "2021-04-12T18:26:54Z")

</div>

| Brand | Kind | Weight in Grams | Submitted |
| --- | --- | --- | --- |
| 3D Printing Canada | Euro Line Spool | 225 | Keith |
| 3D Printing Canada | NEAT Line Early 2020 Spool | 240 | Keith |
| 3D Printing Canada | Standard Line Spool | 240 | Keith |
| 3D Printing Canada | Value Line Early 2020 Spool | 230 | Keith |
| 3D Printing Canada | Value Line Late 2020 Spool | 230 | Keith |
| Amz3d | N/A | 224 | mobiobi |
| Creality | 200 gm spools | 104 | Keith |
| Dupont | Clear 1 kg | 360 | Amiro62 |
| eSun | Black 500 gm | 212 | Amiro62 |
| eSun | Black | 230 | Amiro62 |
| eSun | Clear 500 gm | 203 | Amiro62 |
| eSun | Clear 1 kg | 210 | Amiro62 |
| eSun | Nylon, CF-Pa Spools, Clear Bolt together | 220 | Keith |
| Eurekatec | Laser Cut with 3d printed core | 196 | Kitedemon |
| Filaments ca | Canadian Maker Series | 328 | Kitedemon |
| Filaments ca | True Food Safe PLA 3DPN | 250 | Kitedemon |
| Filaments ca | EcoTough Clear | 215 | Kitedemon |
| Filaments ca | Value | 210 | Kitedemon |
| FormFutura | Apollo X 750 gm | 195 | Kitedemon |
| Geeetech | Black | 182 | Kitedemon |
| Geeetech | Cubes Pattern | 233 | Keith |
| Hello3D | Rainbow Label | 210 | Kitedemon |
| IIID Max | PLA+ (this is likely common to others) | 216 | BD43 |
| MG Chemicals | Narrow 1 kg | 239 | Keith |
| MG Chemicals | Wide 1 kg | 250 | Keith |
| MG Chemicals | Black 200 gm | 136 | Keith |
| MG Chemicals | Cardboard 1 kg | 150 | Keith |
| Nefila | “Recycled Filament” Reusable Spool | 130 | Keith |
| Priline | Black | 206 | Kitedemon |
| Prusa by Fillamentum | Clear Spool with Core Sleeve | 284 | Kitedemon |
| Prusament | Spool | 191 | Dr. Marvin |
| Sakata | Black | 240 | Keith |
| Sakata | Clear | 205 | Keith |
| Solutech | Black | 218 | Kitedemon |
| SunLu | Black 1 kg | 220 | Keith |
| SunLu | Clear ‘Lightweight’ | 139 | Keith |
| Y&S Filament | Clear 1 kg | 280 | Kitedemon |

---

<div class="post-metadata">

**Author:** ![Keith](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/keith/32/92_2.png) [@Keith](https://3dprintingspace.com/u/Keith)\
**Post date:** [April 12, 2021, 7:22pm UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/15 "2021-04-12T19:22:33Z")

</div>

@kitedemon  
Thanks Alex!

---

<div class="post-metadata">

**Author:** ![Dr.Marvin](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/dr.marvin/32/195_2.png) [@Dr.Marvin](https://3dprintingspace.com/u/Dr.Marvin)\
**Post date:** [April 17, 2021, 4:29am UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/16 "2021-04-17T04:29:56Z")

</div>

Tomorrow ill check my prusament spools to add them to this list. Though if you have a spool of prusament you can check the weight yourself online aswell.

---

<div class="post-metadata">

**Author:** ![Dr.Marvin](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/dr.marvin/32/195_2.png) [@Dr.Marvin](https://3dprintingspace.com/u/Dr.Marvin)\
**Post date:** [April 19, 2021, 4:37am UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/17 "2021-04-19T04:37:54Z")

</div>

Sorry for the delay.

My petg prusament spool weight is 191 grams

---

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [April 19, 2021, 10:35am UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/18 "2021-04-19T10:35:57Z")

</div>

I’ll get that in later. @Dr.Marvin is that the hex pattern spool?

---

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [May 1, 2021, 12:08am UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/19 "2021-05-01T00:08:01Z")

</div>

I finished a couple of Eurekatec spools this week. There is a lot of variation in the weights, I weighed and averaged the weights and updated the list. Please keep in mind there will be variations in all the measurements but this one is quite large with MDF and printed cores.

---

<div class="post-metadata">

**Author:** ![Glenn](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/glenn/32/728_2.png) [@Glenn](https://3dprintingspace.com/u/Glenn)\
**Post date:** [May 1, 2021, 12:47am UTC](https://3dprintingspace.com/t/empty-spool-weights/1514/20 "2021-05-01T00:47:29Z")

</div>

I got plastic cores with my Eurekatec filament. They take them back and give you a bit off so think they get all kinds in there

[Next page](https://3dprintingspace.com/t/empty-spool-weights/1514.md?page=2)
