# Ender 3 X Axis Switch Move

**URL:** <https://3dprintingspace.com/t/ender-3-x-axis-switch-move/4973>\
**Category:** 3D Printer Parts\
**Created:** [December 29, 2022, 11:02am UTC](https://3dprintingspace.com/t/ender-3-x-axis-switch-move/4973 "2022-12-29T11:02:23Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![MicroFarmModels](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/m/9fc348/32.png) [@MicroFarmModels](https://3dprintingspace.com/u/MicroFarmModels)\
**Post date:** [December 29, 2022, 11:02am UTC](https://3dprintingspace.com/t/ender-3-x-axis-switch-move/4973/1 "2022-12-29T11:02:23Z")

</div>

> **[Ender 3 X Axis Pulley Shroud For Stop Relocation by ALThings3d](https://www.thingiverse.com/thing:5750974)**
>
> I designed this part as a replacement shroud for the x axis stepper pulley in order to move the end stop switch back 4mm. This allows me to utilize the entire 235mm by 235mm bed. With the original endstop mount, 4mm of the bed is not utilized,...

I designed this part to move the x axis end stop on the ender 3 back 4mm. This should allow the entire bed to be utilized properly. Feel free to use it if you desire! 😀