# Failing resin print

**URL:** <https://3dprintingspace.com/t/failing-resin-print/10050>\
**Category:** General Discussion\
**Created:** [April 5, 2025, 5:51pm UTC](https://3dprintingspace.com/t/failing-resin-print/10050 "2025-04-05T17:51:12Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![NickGarai](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/n/ec9cab/32.png) [@NickGarai](https://3dprintingspace.com/u/NickGarai)\
**Post date:** [April 5, 2025, 5:51pm UTC](https://3dprintingspace.com/t/failing-resin-print/10050/1 "2025-04-05T17:51:12Z")

</div>

My resin print is consistently failing on the same location. I have had supports added but no effect. Any suggestions that could fix this problem? I have angled it forward 10 degrees but that did not help.

 ![IMG_7316](https://storage.3dprintingspace.com/original/2X/b/bf8a6b37965ff65a262d8861a0387b5ef70005eb.jpeg)

---

<div class="post-metadata">

**Author:** ![Loosenut](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/loosenut/32/3612_2.png) [@Loosenut](https://3dprintingspace.com/u/Loosenut)\
**Post date:** [April 5, 2025, 9:56pm UTC](https://3dprintingspace.com/t/failing-resin-print/10050/2 "2025-04-05T21:56:24Z")

</div>

For a start check your model file for errors.

---

<div class="post-metadata">

**Author:** ![lilyclark](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/l/eb9ed0/32.png) [@lilyclark](https://3dprintingspace.com/u/lilyclark)\
**Post date:** [April 30, 2025, 9:51am UTC](https://3dprintingspace.com/t/failing-resin-print/10050/3 "2025-04-30T09:51:07Z")

</div>

I’m not sure what kind of object you’re trying to print—could you send the model file so I can take a look? The details aren’t very clear in the picture, and there seems to be some deformation. You might need to control the post-curing time and temperature; the temperature might be a bit too high.