# Favorite Infill **URL:** \ **Category:** 3D Printer Slicers\ **Created:** [February 11, 2021, 5:05pm UTC](https://3dprintingspace.com/t/favorite-infill/1541 "2021-02-11T17:05:57Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![mobiobi](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/mobiobi/32/7960_2.png) [@mobiobi](https://3dprintingspace.com/u/mobiobi)\ **Post date:** [February 11, 2021, 5:05pm UTC](https://3dprintingspace.com/t/favorite-infill/1541/1 "2021-02-11T17:05:57Z")
So Gyroid is all the rage these days, it's what the cool kids are using, and I want to like it, I see the benefits, ref, https://3dprintingspace.com/t/everything-you-need-to-know-about-infills/205 I guess I have only two ‘first-world’ kinda problems with it. It seems to cause some excess vibrations at higher speeds(shakes my camera…) It is supposed to be faster, but it looks to me that there is more infill at 10% than my goto, Stars. In fact, since we all agree that most infill is done between 10-40%, why can’t we expand the options for infill percent in that range? Why can’t I at least have 12.5% and 17.5% if not a crazy 7.5%… ---
**Author:** ![mobiobi](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/mobiobi/32/7960_2.png) [@mobiobi](https://3dprintingspace.com/u/mobiobi)\ **Post date:** [February 11, 2021, 5:10pm UTC](https://3dprintingspace.com/t/favorite-infill/1541/2 "2021-02-11T17:10:54Z")
(K, apparently I don’t know how to put a link in a post…) ---
**Author:** ![Glenn](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/glenn/32/728_2.png) [@Glenn](https://3dprintingspace.com/u/Glenn)\ **Post date:** [February 11, 2021, 5:59pm UTC](https://3dprintingspace.com/t/favorite-infill/1541/3 "2021-02-11T17:59:18Z")
I’ve settled on using gyroid mostly because the head doesn’t usually hit it. most of the other infills have intersections that are on the same layer and the head bumps over them ---
**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\ **Post date:** [February 11, 2021, 6:42pm UTC](https://3dprintingspace.com/t/favorite-infill/1541/4 "2021-02-11T18:42:15Z")
Support Cubic is my new go to. Faster! I use adaptive cubic too but typically support cubic. I use the Prusa slicer I am not sure if others have that function. [https://youtu.be/AFnzRb3BPhs?t=345](https://youtu.be/AFnzRb3BPhs?t=345) ---
**Author:** ![mobiobi](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/mobiobi/32/7960_2.png) [@mobiobi](https://3dprintingspace.com/u/mobiobi)\ **Post date:** [February 11, 2021, 6:45pm UTC](https://3dprintingspace.com/t/favorite-infill/1541/5 "2021-02-11T18:45:27Z")
true, true. I do like the idea of infill designed to support upper horizontal layers…I’ll need to use that more. ---
**Author:** ![Keith](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/keith/32/92_2.png) [@Keith](https://3dprintingspace.com/u/Keith)\ **Post date:** [February 12, 2021, 8:03pm UTC](https://3dprintingspace.com/t/favorite-infill/1541/6 "2021-02-12T20:03:46Z")
> [@mobiobi](#): > > [Everything you need to know about infills](https://3dprintingspace.com/t/everything-you-need-to-know-about-infills/205) 🙂 > [@Everything you need to know about infills](https://3dprintingspace.com/t/everything-you-need-to-know-about-infills/205): > > This is a great article covering the different types of infill options in PrusaSlicer (2.3) > **[Everything you need to know about infills - Original Prusa 3D Printers](https://blog.prusa3d.com/everything-you-need-to-know-about-infills_43579/)** > > You may have noticed that there are new infill patterns in our new version of PrusaSlicer (2.3). Now, with the sheer amount of options, you might even feel overwhelmed with all the possibilities. Which infill should you choose? Is there a... ---
**Author:** ![frozenrc](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/frozenrc/32/149_2.png) [@frozenrc](https://3dprintingspace.com/u/frozenrc)\ **Post date:** [February 12, 2021, 9:36pm UTC](https://3dprintingspace.com/t/favorite-infill/1541/7 "2021-02-12T21:36:56Z")
I tend to prefer gyroid, for the projects I do that don’t have a lot of infill I find it adds great strength in comparison to the normal grid. ---
**Author:** ![LEGOManiac](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/l/ba8739/32.png) [@LEGOManiac](https://3dprintingspace.com/u/LEGOManiac)\ **Post date:** [February 15, 2021, 12:29pm UTC](https://3dprintingspace.com/t/favorite-infill/1541/8 "2021-02-15T12:29:24Z")
For infill I still use cubic, but for support layers, I fell in love with gyroid. It comes off so cleanly. ---
**Author:** ![frozenrc](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/frozenrc/32/149_2.png) [@frozenrc](https://3dprintingspace.com/u/frozenrc)\ **Post date:** [February 15, 2021, 9:51pm UTC](https://3dprintingspace.com/t/favorite-infill/1541/9 "2021-02-15T21:51:50Z")
Never thought of using it for support