I had a surprise when I used a black light to QC some conformal coating on a PCB. The UnveilForm blue and white filament are glowing. No other filament arround did the same thing.
Are the other UnveilForm or 3D Pinting Canada colors that also react to black light? In the picture you can see UnveilForm white and blue, the dark one are regular blue and white filament and the orange one is PETG “Montreal RoadWork Orange”. The picture does not really shows the difference between the UnveilForm withe and blue, but there is one. Halloween is comming, I’m looking for ideas.
Could make for some sneaky Halloween accents, especially on white parts where it looks normal until the UV hits. Funny how the random QC light turns into a filament test rig
You got me curious… so I had a look at a bunch of the filament we have in the shop. Most white filaments will glow ok, but in general greens and oranges seem to be the brightest.
Here’s some from our store that I found to glow brightly. Tested with a 395nm blacklight, added a to ones that were exceptionally bright:
3D Printing Canada
Budget PLA Green
Budget PLA Orange
Budget PLA Pink
Standard PLA Red
Standard PLA Light Blue
Standard PLA Green
Standard PLA Yellow
Standard PLA Silk Red
Budget PETG Orange
Standard PETG Transparent Orange
Standard PETG Transparent Green
Standard PETG Transparent Yellow
UnveilForm
Refill PLA Green
Refill PLA Orange
Refill PLA Blue
Refill PLA White
SUNLU
PLA Red
PLA Klein Blue
PLA Cyan
PLA Sunny Orange
PETG Red
PETG Klein Blue
PETG Cyan
PETG Sunny Orange
Spectrum
PLA Premium Neon Orange UV
PETG Premium Lime Green
If anyone else has some to contribute feel free to add! I didn’t get to testing much of Bambu’s filaments.
Definitely giving some good ideas for Halloween decoration in combination with blacklights