# Finally got ABS working

**URL:** <https://3dprintingspace.com/t/finally-got-abs-working/7131>\
**Category:** 3D Printing Materials\
**Created:** [September 10, 2023, 9:33pm UTC](https://3dprintingspace.com/t/finally-got-abs-working/7131 "2023-09-10T21:33:22Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Andy.wpg](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/a/edb3f5/32.png) [@Andy.wpg](https://3dprintingspace.com/u/Andy.wpg)\
**Post date:** [September 10, 2023, 9:33pm UTC](https://3dprintingspace.com/t/finally-got-abs-working/7131/1 "2023-09-10T21:33:22Z")

</div>

I had an idea for an item to sell (along with other things, of course) when I’m at craft sales.  
“Jade” Buddha figures.  
Never had much luck with ABS, but I finally found settings that work for me. The idea is this forest green ABS should look like jade when it’s vapour polished with acetone.  
This is a test of the model I purchased. I scaled it to 60mm tall, and it turned out pretty good IMHO.  
Now to figure out vapour polishing……  
Anyone got any tips?

 ![IMG_3083](https://storage.3dprintingspace.com/original/2X/4/43d72c9ebff4f6d8e574e8ca6d1c0035cba0c39b.jpeg)

---

<div class="post-metadata">

**Author:** ![Loosenut](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/loosenut/32/3612_2.png) [@Loosenut](https://3dprintingspace.com/u/Loosenut)\
**Post date:** [September 10, 2023, 9:57pm UTC](https://3dprintingspace.com/t/finally-got-abs-working/7131/2 "2023-09-10T21:57:14Z")

</div>

YouTube has info on vapour polishing.

I’d call him a little fat guy but if i open my shirt it could be there. SIGH.

---

<div class="post-metadata">

**Author:** ![Andy.wpg](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/a/edb3f5/32.png) [@Andy.wpg](https://3dprintingspace.com/u/Andy.wpg)\
**Post date:** [September 10, 2023, 9:58pm UTC](https://3dprintingspace.com/t/finally-got-abs-working/7131/3 "2023-09-10T21:58:17Z")

</div>

You and me both, brother. 😉

---

<div class="post-metadata">

**Author:** ![Jason](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/jason/32/6148_2.png) [@Jason](https://3dprintingspace.com/u/Jason)\
**Post date:** [September 11, 2023, 7:50pm UTC](https://3dprintingspace.com/t/finally-got-abs-working/7131/4 "2023-09-11T19:50:16Z")

</div>

me three 🙄

---

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [September 12, 2023, 11:46am UTC](https://3dprintingspace.com/t/finally-got-abs-working/7131/5 "2023-09-12T11:46:39Z")

</div>

Me 4. Be careful acetone is really flammable and acetone vapour is even more, and bad to breath.
