# Firmware, Creality CRS10v2, setting auto-temperatures?

**URL:** <https://3dprintingspace.com/t/firmware-creality-crs10v2-setting-auto-temperatures/7713>\
**Category:** Marlin\
**Created:** [February 8, 2024, 12:11pm UTC](https://3dprintingspace.com/t/firmware-creality-crs10v2-setting-auto-temperatures/7713 "2024-02-08T12:11:35Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![aPrinterIntheWater](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/a/a6a055/32.png) [@aPrinterIntheWater](https://3dprintingspace.com/u/aPrinterIntheWater)\
**Post date:** [February 8, 2024, 12:11pm UTC](https://3dprintingspace.com/t/firmware-creality-crs10v2-setting-auto-temperatures/7713/1 "2024-02-08T12:11:35Z")

</div>

i’ve followed instructions to install the MicroSwiss hotend, from CJ, at 3d printing canada. Excellent instructions.  
it is working well  
BUT, question  
there is a button to set the temperature of hotend and nozzle, (prior to starting printing), has AUTO and MANUAL.  
Is there a way to set the temperature value, for the AUTO setting, for the PLA, and ABS, buttons? in the default firmware there was a way to set the temperature, for example, to 60 hotbet, 220 nozzle, and that way i would just go to  
temperature - AUTO - PLA button - and it would set the above.  
now i have to enter it manually, can’t find an option to enter it to establish a default value.  
any help appreciated, thanks