# First successful print: Raspberry Pi case **URL:** \ **Category:** 3D Printing Gallery\ **Created:** [March 4, 2021, 6:19pm UTC](https://3dprintingspace.com/t/first-successful-print-raspberry-pi-case/1919 "2021-03-04T18:19:30Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![SpaceMoose](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/spacemoose/32/951_2.png) [@SpaceMoose](https://3dprintingspace.com/u/SpaceMoose)\ **Post date:** [March 4, 2021, 6:19pm UTC](https://3dprintingspace.com/t/first-successful-print-raspberry-pi-case/1919/1 "2021-03-04T18:19:30Z")
So after a ton of fiddling around I have finally printed something useful! A case for my Raspberry Pi 3B+. It’s not 100% but I’m pretty happy with it. Next steps are to set up Octoprint! ![image1 (2)](https://storage.3dprintingspace.com/original/2X/0/067b157cf81a03eb86213f2d688f764f0880ae79.jpeg) ![image0 (3)](https://storage.3dprintingspace.com/original/2X/6/60c634aefbd35babc0fde6b289edd8193da9381b.jpeg) ![image2 (2)](https://storage.3dprintingspace.com/original/2X/4/48d39820edff3095eb36b18b35a32c1ee8ffbb35.jpeg) ---
**Author:** ![tony](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/tony/32/218_2.png) [@tony](https://3dprintingspace.com/u/tony)\ **Post date:** [March 4, 2021, 7:28pm UTC](https://3dprintingspace.com/t/first-successful-print-raspberry-pi-case/1919/2 "2021-03-04T19:28:44Z")
Looks awesome! Great job 🙂 ---
**Author:** ![SpaceMoose](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/spacemoose/32/951_2.png) [@SpaceMoose](https://3dprintingspace.com/u/SpaceMoose)\ **Post date:** [March 4, 2021, 7:29pm UTC](https://3dprintingspace.com/t/first-successful-print-raspberry-pi-case/1919/3 "2021-03-04T19:29:37Z")
Thanks!! I’m pretty happy with it 🙂 ---
**Author:** ![DavidR8](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/d/59ef9b/32.png) [@DavidR8](https://3dprintingspace.com/u/DavidR8)\ **Post date:** [March 4, 2021, 8:32pm UTC](https://3dprintingspace.com/t/first-successful-print-raspberry-pi-case/1919/4 "2021-03-04T20:32:44Z")
Looks really good to me! ---
**Author:** ![SpaceMoose](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/spacemoose/32/951_2.png) [@SpaceMoose](https://3dprintingspace.com/u/SpaceMoose)\ **Post date:** [March 4, 2021, 8:39pm UTC](https://3dprintingspace.com/t/first-successful-print-raspberry-pi-case/1919/5 "2021-03-04T20:39:46Z")
Thanks! I still need to dial it in a little as you could tell in the first layer that my z-offset was a little off and I think I need to turn on ironing so that the top layers are nice and flat so the two halves go together nicely (there are a few small imperfections that prevent a tight fit). But that’s part of the learning. ---
**Author:** ![TurkeyOnRye](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/turkeyonrye/32/1788_2.png) [@TurkeyOnRye](https://3dprintingspace.com/u/TurkeyOnRye)\ **Post date:** [March 4, 2021, 8:58pm UTC](https://3dprintingspace.com/t/first-successful-print-raspberry-pi-case/1919/6 "2021-03-04T20:58:38Z")
Looks good! I think I like your case more than the ones I printed. ![20210126_090825_HDR](https://storage.3dprintingspace.com/original/2X/2/2313f468d3139f1c9bf94a6bfb0b63ba4f25026e.jpeg) ---
**Author:** ![SpaceMoose](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/spacemoose/32/951_2.png) [@SpaceMoose](https://3dprintingspace.com/u/SpaceMoose)\ **Post date:** [March 4, 2021, 8:59pm UTC](https://3dprintingspace.com/t/first-successful-print-raspberry-pi-case/1919/7 "2021-03-04T20:59:57Z")
Thanks! I chose this one because it had a space for the pi camera ribbon cable to go through. The case that came with the pi didn’t for some weird reason. Now I just have to figure out how and where the hell to mount the camera 😉