# Great satsana duct

**URL:** <https://3dprintingspace.com/t/great-satsana-duct/2708>\
**Category:** General Discussion\
**Created:** [June 18, 2021, 6:34pm UTC](https://3dprintingspace.com/t/great-satsana-duct/2708 "2021-06-18T18:34:05Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Redracefpv](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/redracefpv/32/1056_2.png) [@Redracefpv](https://3dprintingspace.com/u/Redracefpv)\
**Post date:** [June 18, 2021, 6:34pm UTC](https://3dprintingspace.com/t/great-satsana-duct/2708/1 "2021-06-18T18:34:06Z")

</div>

Ender 3 with satsana duct works great, if anyone is looking for a good print in place fan duct this one is amazing, and there are remixes for the bltouch or 5010 cooling fan. Great and simple setup works great on my ender 3 with mircoswiss direct drive and bltouch.

 ![image](https://storage.3dprintingspace.com/original/2X/c/ca1df2818546881ad37206806c812d9eabde863a.jpeg) ![image](https://storage.3dprintingspace.com/original/2X/4/41fff75a6cc6d4ad85eafe6bc86137b1e9c9421d.jpeg)

---

<div class="post-metadata">

**Author:** ![Dr.Marvin](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/dr.marvin/32/195_2.png) [@Dr.Marvin](https://3dprintingspace.com/u/Dr.Marvin)\
**Post date:** [June 19, 2021, 6:04am UTC](https://3dprintingspace.com/t/great-satsana-duct/2708/2 "2021-06-19T06:04:03Z")

</div>

Thanks for the heads up. Ill need to check if itll fit onto my adimlab printer. But looks great on yours 🙂

---

<div class="post-metadata">

**Author:** ![Redracefpv](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/redracefpv/32/1056_2.png) [@Redracefpv](https://3dprintingspace.com/u/Redracefpv)\
**Post date:** [June 19, 2021, 4:48pm UTC](https://3dprintingspace.com/t/great-satsana-duct/2708/3 "2021-06-19T16:48:25Z")

</div>

Thanks, they are great ducts try to make one