# Has anyone used Unveil Form PETG? **URL:** \ **Category:** 3D Printing Materials\ **Created:** [October 1, 2026, 1:07pm UTC](https://3dprintingspace.com/t/has-anyone-used-unveil-form-petg/10534 "2026-10-01T13:07:51Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Davethegearhead](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/davethegearhead/32/5299_2.png) [@Davethegearhead](https://3dprintingspace.com/u/Davethegearhead)\ **Post date:** [October 1, 2026, 1:07pm UTC](https://3dprintingspace.com/t/has-anyone-used-unveil-form-petg/10534/1 "2026-10-01T13:07:51Z")
Has anyone used Unveil Form’s PETG? How did it perform at 200 -300 mm/s printing speeds? Thanks ---
**Author:** ![HobbyMaker3D](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/h/bb73d2/32.png) [@HobbyMaker3D](https://3dprintingspace.com/u/HobbyMaker3D)\ **Post date:** [October 1, 2026, 11:17pm UTC](https://3dprintingspace.com/t/has-anyone-used-unveil-form-petg/10534/2 "2026-10-01T23:17:18Z")
I have used Unveil PLA and run it through my Bambu H2S, it prints like a dream and fairly inepensive. I have yet to try the PETG but based on the quality of the PLA I would not hesitate to give it a go. ---
**Author:** ![JPPaq](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/f04885/32.png) [@JPPaq](https://3dprintingspace.com/u/JPPaq)\ **Post date:** [October 4, 2026, 9:51pm UTC](https://3dprintingspace.com/t/has-anyone-used-unveil-form-petg/10534/3 "2026-10-04T21:51:17Z")
I’ve used two rolls of black and have a roll of white and a roll of orange. I get good quality, strong prints from all 3. But, I caution that you must make sure that the filament is dried to to 10% or less relative humidity or you may get layer adhesion problems on large prints. I use it in an enclosed Bambu P1S with a 0.4mm hardened steel nozzle. Have fun printing with it. Cheers. ---
**Author:** ![Davethegearhead](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/davethegearhead/32/5299_2.png) [@Davethegearhead](https://3dprintingspace.com/u/Davethegearhead)\ **Post date:** [October 5, 2026, 6:56pm UTC](https://3dprintingspace.com/t/has-anyone-used-unveil-form-petg/10534/4 "2026-10-05T18:56:20Z")
Thanks for the info ---
**Author:** ![Spencer-3D](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/spencer-3d/32/10538_2.png) [@Spencer-3D](https://3dprintingspace.com/u/Spencer-3D)\ **Post date:** [October 6, 2026, 5:57pm UTC](https://3dprintingspace.com/t/has-anyone-used-unveil-form-petg/10534/5 "2026-10-06T17:57:10Z")
I’ve done some tests with our PETG here at the store! Testing max volumetric flow for Unveil Form’s Black Matte PETG on an H2D with a standard 0.4mm nozzle I got about **23 mm/s³**. **To calculate max print speed:** Max volumetric flow (mm³/s) ÷ (Line width × Layer height) = Max speed (mm/s) Printing at a normal 0.2mm layer height, with 0.42mm line width, we get a max printing speed of about **274 mm/s** – so around the same ballpark. Although I would typically knock that down 90% for better quality, so maybe 247 mm/s is a more reasonable ask. The Unveil Form Matte PETG looks to sit right in between Bambu Lab’s discontinued PETG-HF (25mm/s³) and their newer PETG Basic (21mm/s³) in terms of max volumetric flow, so pretty respectable. If you’re curious how it compares to the rest of the PETG we stock, I made a video about this here: [https://youtu.be/uDBimYFa8kc](https://youtu.be/uDBimYFa8kc) -- Spencer **3D Printing Canada Team** ---
**Author:** ![Davethegearhead](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/davethegearhead/32/5299_2.png) [@Davethegearhead](https://3dprintingspace.com/u/Davethegearhead)\ **Post date:** [October 6, 2026, 8:44pm UTC](https://3dprintingspace.com/t/has-anyone-used-unveil-form-petg/10534/6 "2026-10-06T20:44:04Z")
Thanks… That’s excellent info. I’m testing now on a K1 max and K2 plus using 18mm3/sec and 200mm/s outer wall with 300mm/s inner wall. So far so good. I took a bit of a chance and bought 35kg!