# Honey bee stuff **URL:** \ **Category:** High-Quality STL Files for 3D Printing\ **Created:** [December 12, 2022, 11:45am UTC](https://3dprintingspace.com/t/honey-bee-stuff/4894 "2022-12-12T11:45:16Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Kim](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/9f8e36/32.png) [@Kim](https://3dprintingspace.com/u/Kim)\ **Post date:** [December 12, 2022, 11:45am UTC](https://3dprintingspace.com/t/honey-bee-stuff/4894/1 "2022-12-12T11:45:16Z")
Any one have files on 3d honey be foundation. Or know where I could find. Thanks ---
**Author:** ![Jason](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/jason/32/6148_2.png) [@Jason](https://3dprintingspace.com/u/Jason)\ **Post date:** [December 12, 2022, 3:41pm UTC](https://3dprintingspace.com/t/honey-bee-stuff/4894/2 "2022-12-12T15:41:03Z")
HI Kim Welcome to the forum, Glad you found us in our little corner of the web. I personally have never heard of this before, is this like a starter block for honey bees? Can you describe a little more detail, I am sure someone here has seen it before. ---
**Author:** ![era99](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/e/7ab992/32.png) [@era99](https://3dprintingspace.com/u/era99)\ **Post date:** [December 12, 2022, 4:34pm UTC](https://3dprintingspace.com/t/honey-bee-stuff/4894/3 "2022-12-12T16:34:09Z")
Hi, Kim: There are STL files on Thingiverse for honey bee foundation, such as [DNM Mittelwand Honey Bee Foundation Carnica 5,55mm by Explorator - Thingiverse](https://www.thingiverse.com/thing:4805521) I’ve not kept bees in such a long time, I wasn’t aware that you could use a plastic foundation. Mine were made of beeswax in a wooden frame. ---
**Author:** ![Kim](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/9f8e36/32.png) [@Kim](https://3dprintingspace.com/u/Kim)\ **Post date:** [December 12, 2022, 11:09pm UTC](https://3dprintingspace.com/t/honey-bee-stuff/4894/4 "2022-12-12T23:09:17Z")
Thank you I found some good files ---
**Author:** ![Kim](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/9f8e36/32.png) [@Kim](https://3dprintingspace.com/u/Kim)\ **Post date:** [December 12, 2022, 11:09pm UTC](https://3dprintingspace.com/t/honey-bee-stuff/4894/5 "2022-12-12T23:09:42Z")
Thanks Jason ---
**Author:** ![Jason](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/jason/32/6148_2.png) [@Jason](https://3dprintingspace.com/u/Jason)\ **Post date:** [December 13, 2022, 3:05pm UTC](https://3dprintingspace.com/t/honey-bee-stuff/4894/6 "2022-12-13T15:05:39Z")
No Problem, show us your finished product, I’m interested ---
**Author:** ![JayGee59](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/54ee81/32.png) [@JayGee59](https://3dprintingspace.com/u/JayGee59)\ **Post date:** [October 5, 2023, 11:01pm UTC](https://3dprintingspace.com/t/honey-bee-stuff/4894/7 "2023-10-05T23:01:05Z")
Sure! Type in “Instructables” in a search engine. Once there FIND/SEARCH “3D Honeycomb Pendant” They are easy enough to draw too. You just need to set two or more Hexagons together and then DELETE all of the duplicate lines created where they join each other. You can build up a BLOCK of these (make sure you get ALL duplicate lines) and then copy and paste and get rid of MORE duplicate lines. Easy stuff to do! You just need to put a rein on and have PATIENCE! HAVE FUN WITH THE BEES! ---
**Author:** ![chris](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/chris/32/1090_2.png) [@chris](https://3dprintingspace.com/u/chris)\ **Post date:** [October 5, 2023, 11:42pm UTC](https://3dprintingspace.com/t/honey-bee-stuff/4894/8 "2023-10-05T23:42:06Z")
I saw a kickstarter for a 3d printer bee hive, check it out: [https://www.kickstarter.com/projects/975458331/hex-hives-3d-printable-bee-hives-for-everyone](https://www.kickstarter.com/projects/975458331/hex-hives-3d-printable-bee-hives-for-everyone) ![image](https://storage.3dprintingspace.com/original/2X/8/877a539b2ccfedd1bf60df278f7386b74bb119b2.jpeg)