# idearMaker dynamic layer height

**URL:** <https://3dprintingspace.com/t/idearmaker-dynamic-layer-height/8421>\
**Category:** Filament 3D Printer Technical Help\
**Created:** [May 5, 2024, 4:08am UTC](https://3dprintingspace.com/t/idearmaker-dynamic-layer-height/8421 "2024-05-05T04:08:21Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mickey](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/m/ccd318/32.png) [@Mickey](https://3dprintingspace.com/u/Mickey)\
**Post date:** [May 5, 2024, 4:08am UTC](https://3dprintingspace.com/t/idearmaker-dynamic-layer-height/8421/1 "2024-05-05T04:08:21Z")

</div>

How to set the dynamic layer height on idearMaker?

---

<div class="post-metadata">

**Author:** ![Matthew](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/matthew/32/7552_2.png) [@Matthew](https://3dprintingspace.com/u/Matthew)\
**Post date:** [May 6, 2024, 2:30pm UTC](https://3dprintingspace.com/t/idearmaker-dynamic-layer-height/8421/2 "2024-05-06T14:30:44Z")

</div>

It will be under the experimental settings, if you have trouble finding it let me know and I can give you a hand!

> **[Cura Adaptive Layers – Simply Explained](https://all3dp.com/2/cura-adaptive-layers-simply-explained/)**
>
> Cura's adaptive layers feature uses varying layer heights to achieve increased detail while reducing print time. Read on to learn more!

---

<div class="post-metadata">

**Author:** ![Mickey](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/m/ccd318/32.png) [@Mickey](https://3dprintingspace.com/u/Mickey)\
**Post date:** [May 7, 2024, 7:12am UTC](https://3dprintingspace.com/t/idearmaker-dynamic-layer-height/8421/3 "2024-05-07T07:12:07Z")

</div>

Thank you, but I hope to use the dynamic layer-high function instead of Cura in the slicing software ideaMaker.

---

<div class="post-metadata">

**Author:** ![Matthew](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/matthew/32/7552_2.png) [@Matthew](https://3dprintingspace.com/u/Matthew)\
**Post date:** [May 7, 2024, 1:45pm UTC](https://3dprintingspace.com/t/idearmaker-dynamic-layer-height/8421/4 "2024-05-07T13:45:55Z")

</div>

Sorry read that as Ultimaker 🤣

I think this will be more what you are looking for:

[Support Center | Raise 3D Technologies Inc](https://support.raise3d.com/ideaMaker/4-5-5-adaptive-layer-height%EF%BB%BF-15-844.html#:~:text=ideaMaker%20will%20figure%20out%20each,mm%20base%20on%20your%20model.&text=Adaptive%20Layer%20Height%20Outward%20Overhang,percentage%20over%20the%20extrusion%20width).

---

<div class="post-metadata">

**Author:** ![Tiago](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/t/f0a364/32.png) [@Tiago](https://3dprintingspace.com/u/Tiago)\
**Post date:** [May 7, 2024, 5:17pm UTC](https://3dprintingspace.com/t/idearmaker-dynamic-layer-height/8421/5 "2024-05-07T17:17:14Z")

</div>

It is a bit more complicated on IdeaMaker

Prepare to Slice → Per-group Settings → Add → Enable Adaptive Layer Height

 ![image](https://storage.3dprintingspace.com/original/2X/4/44d0ac67df5ae35c3a12e3e30e9bda298988eb47.png)

---

<div class="post-metadata">

**Author:** ![Tiago](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/t/f0a364/32.png) [@Tiago](https://3dprintingspace.com/u/Tiago)\
**Post date:** [May 7, 2024, 5:18pm UTC](https://3dprintingspace.com/t/idearmaker-dynamic-layer-height/8421/6 "2024-05-07T17:18:11Z")

</div>

You can play with other settings as well

 ![image](https://storage.3dprintingspace.com/original/2X/a/a8102632339933800efcf505ccc3ba62b7f57524.png)

---

<div class="post-metadata">

**Author:** ![Mickey](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/m/ccd318/32.png) [@Mickey](https://3dprintingspace.com/u/Mickey)\
**Post date:** [May 8, 2024, 12:20am UTC](https://3dprintingspace.com/t/idearmaker-dynamic-layer-height/8421/7 "2024-05-08T00:20:37Z")

</div>

Thank you very much. I don’t know why I didn’t find this article before. 😀

---

<div class="post-metadata">

**Author:** ![Mickey](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/m/ccd318/32.png) [@Mickey](https://3dprintingspace.com/u/Mickey)\
**Post date:** [May 8, 2024, 12:21am UTC](https://3dprintingspace.com/t/idearmaker-dynamic-layer-height/8421/8 "2024-05-08T00:21:14Z")

</div>

Thank you very much. I have set it up successfully.