# Importing crm4 into Prusa slicer

**URL:** <https://3dprintingspace.com/t/importing-crm4-into-prusa-slicer/10172>\
**Category:** General Discussion\
**Created:** [June 30, 2025, 1:48am UTC](https://3dprintingspace.com/t/importing-crm4-into-prusa-slicer/10172 "2025-06-30T01:48:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![NickGarai](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/n/ec9cab/32.png) [@NickGarai](https://3dprintingspace.com/u/NickGarai)\
**Post date:** [June 30, 2025, 1:48am UTC](https://3dprintingspace.com/t/importing-crm4-into-prusa-slicer/10172/1 "2025-06-30T01:48:15Z")

</div>

Can someone let me know if the prusa slicer supports the CRM4 printer? What parameters need to be added to make the printer work?

---

<div class="post-metadata">

**Author:** ![Loosenut](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/loosenut/32/3612_2.png) [@Loosenut](https://3dprintingspace.com/u/Loosenut)\
**Post date:** [June 30, 2025, 10:09pm UTC](https://3dprintingspace.com/t/importing-crm4-into-prusa-slicer/10172/2 "2025-06-30T22:09:25Z")

</div>

I looked through Prusa slicer and could not find a profile for your printer, there is one for it in Orca slicer and they are very similar in use. Orca is based on Bambu slicer which is based on Prusa Slicer.