# Installation tutorial for #BLTouch on #BIQU B1

**URL:** <https://3dprintingspace.com/t/installation-tutorial-for-bltouch-on-biqu-b1/184>\
**Category:** BigTreeTech Biqu B1\
**Created:** [February 2, 2021, 7:10pm UTC](https://3dprintingspace.com/t/installation-tutorial-for-bltouch-on-biqu-b1/184 "2021-02-02T19:10:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Keith](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/keith/32/92_2.png) [@Keith](https://3dprintingspace.com/u/Keith)\
**Post date:** [February 2, 2021, 7:10pm UTC](https://3dprintingspace.com/t/installation-tutorial-for-bltouch-on-biqu-b1/184/1 "2021-02-02T19:10:17Z")

</div>

Here is a quick little video from BigTreeTech showing how to install the BLTouch system to the Biqu B1. Just follow along with this video and get on that auto-bed leveling train!

[![](https://storage.3dprintingspace.com/original/2X/d/da43c37810575f1e880691e68dfb434a36f5666d.jpeg "Installation tutorial for #BLTouch on #BIQU B1") ](https://www.youtube.com/watch?v=vtW7WoUI13A)

---

<div class="post-metadata">

**Author:** ![Glenn](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/glenn/32/728_2.png) [@Glenn](https://3dprintingspace.com/u/Glenn)\
**Post date:** [February 3, 2021, 10:14pm UTC](https://3dprintingspace.com/t/installation-tutorial-for-bltouch-on-biqu-b1/184/2 "2021-02-03T22:14:46Z")

</div>

On mine the bracket was made so the springs can’t ube used. it already puts the sensor in the right place.