# Just to add more to the mix

**URL:** <https://3dprintingspace.com/t/just-to-add-more-to-the-mix/1688>\
**Category:** 3D Printer Slicers\
**Created:** [February 17, 2021, 11:45pm UTC](https://3dprintingspace.com/t/just-to-add-more-to-the-mix/1688 "2021-02-17T23:45:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![HobbyMaker3D](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/h/bb73d2/32.png) [@HobbyMaker3D](https://3dprintingspace.com/u/HobbyMaker3D)\
**Post date:** [February 17, 2021, 11:45pm UTC](https://3dprintingspace.com/t/just-to-add-more-to-the-mix/1688/1 "2021-02-17T23:45:24Z")

</div>

New SLA slicer seems to be getting raves, Lychee. I have not downloaded nor used but just putting it out there.

---

<div class="post-metadata">

**Author:** ![Keith](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/keith/32/92_2.png) [@Keith](https://3dprintingspace.com/u/Keith)\
**Post date:** [February 19, 2021, 10:16pm UTC](https://3dprintingspace.com/t/just-to-add-more-to-the-mix/1688/2 "2021-02-19T22:16:37Z")

</div>

Hello Hobby.

I’ve made a whole new heading Tab just for Lychee, under slicers. As per your request.