# K1 Max problems

**URL:** <https://3dprintingspace.com/t/k1-max-problems/7329>\
**Category:** Creality K1 Max\
**Created:** [November 5, 2023, 12:53pm UTC](https://3dprintingspace.com/t/k1-max-problems/7329 "2023-11-05T12:53:41Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![MikeGumbo](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/m/e495f1/32.png) [@MikeGumbo](https://3dprintingspace.com/u/MikeGumbo)\
**Post date:** [November 5, 2023, 12:53pm UTC](https://3dprintingspace.com/t/k1-max-problems/7329/1 "2023-11-05T12:53:41Z")

</div>

I bought the K1 Max yesterday. printed the sample files then printed a few of my own. the last file started to home the z axis but would only home half way up. seemed to go through the leveling process and started printing up in the air. I am also getting a lidar error and the machine keep going. Does any one have and suggestions or fixes for this?  
Thanks in Advance  
EDIT  
I figured out the bed error. I used screws to mount the top glass on the side that were too long.  
still figuring out the lidar problem tho.