# K1C not connecting to network

**URL:** <https://3dprintingspace.com/t/k1c-not-connecting-to-network/9119>\
**Category:** General Discussion\
**Created:** [August 13, 2024, 7:49pm UTC](https://3dprintingspace.com/t/k1c-not-connecting-to-network/9119 "2024-08-13T19:49:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Robmar](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/r/ec9cab/32.png) [@Robmar](https://3dprintingspace.com/u/Robmar)\
**Post date:** [August 13, 2024, 7:49pm UTC](https://3dprintingspace.com/t/k1c-not-connecting-to-network/9119/1 "2024-08-13T19:49:56Z")

</div>

K1C will not connect to my bell modem. I have tried resetting the printer but still won’t connect.

---

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [August 19, 2024, 3:26pm UTC](https://3dprintingspace.com/t/k1c-not-connecting-to-network/9119/2 "2024-08-19T15:26:55Z")

</div>

Most will not connect to 5ghz. You need 2.4 generally. Best guess.
