# Layer shift in the exact same spot?

**URL:** <https://3dprintingspace.com/t/layer-shift-in-the-exact-same-spot/1829>\
**Category:** Creality Ender 5 Plus\
**Created:** [February 25, 2021, 3:42pm UTC](https://3dprintingspace.com/t/layer-shift-in-the-exact-same-spot/1829 "2021-02-25T15:42:44Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Besideupside](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/b/ecae2f/32.png) [@Besideupside](https://3dprintingspace.com/u/Besideupside)\
**Post date:** [February 25, 2021, 3:42pm UTC](https://3dprintingspace.com/t/layer-shift-in-the-exact-same-spot/1829/1 "2021-02-25T15:42:44Z")

</div>

Hello, hope I can get some guidance;

Two prints in a row and had a layer shift in the exact same spot, I do not believe it’s the stl, I printed this stl at 100% that was too big, scaled down to 90% and here we are…

 ![image](https://storage.3dprintingspace.com/original/2X/4/4379de9fb5790ebdfa49bdd6772a315923b43729.jpeg)

---

<div class="post-metadata">

**Author:** ![3DMultiMaker](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/3dmultimaker/32/1037_2.png) [@3DMultiMaker](https://3dprintingspace.com/u/3DMultiMaker)\
**Post date:** [February 25, 2021, 5:21pm UTC](https://3dprintingspace.com/t/layer-shift-in-the-exact-same-spot/1829/2 "2021-02-25T17:21:08Z")

</div>

It could be the slicer, just angle the stl on the bed in the slicer, say 15 degrees see if that helps. Slicers are not infallible.

---

<div class="post-metadata">

**Author:** ![Besideupside](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/b/ecae2f/32.png) [@Besideupside](https://3dprintingspace.com/u/Besideupside)\
**Post date:** [February 25, 2021, 6:35pm UTC](https://3dprintingspace.com/t/layer-shift-in-the-exact-same-spot/1829/3 "2021-02-25T18:35:06Z")

</div>

Oh?

Neat, I’ll give it a try👍

---

<div class="post-metadata">

**Author:** ![Besideupside](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/b/ecae2f/32.png) [@Besideupside](https://3dprintingspace.com/u/Besideupside)\
**Post date:** [February 25, 2021, 11:35pm UTC](https://3dprintingspace.com/t/layer-shift-in-the-exact-same-spot/1829/4 "2021-02-25T23:35:00Z")

</div>

![image](https://storage.3dprintingspace.com/original/2X/d/d9b58418a5fb2348a6fc58930fa35ca425dade4d.jpeg)

This printed just fine, I did what was suggested and started up the print, guess we will see in the morning 👍

---

<div class="post-metadata">

**Author:** ![Besideupside](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/b/ecae2f/32.png) [@Besideupside](https://3dprintingspace.com/u/Besideupside)\
**Post date:** [February 27, 2021, 1:01am UTC](https://3dprintingspace.com/t/layer-shift-in-the-exact-same-spot/1829/5 "2021-02-27T01:01:02Z")

</div>

Well, that seemed to work👍

 ![image](https://storage.3dprintingspace.com/original/2X/2/2f9e3cb94768659067ed55b968a8362ce5a9a2de.jpeg)

---

<div class="post-metadata">

**Author:** ![sts41](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/s/3da27b/32.png) [@sts41](https://3dprintingspace.com/u/sts41)\
**Post date:** [March 1, 2021, 2:22pm UTC](https://3dprintingspace.com/t/layer-shift-in-the-exact-same-spot/1829/6 "2021-03-01T14:22:17Z")

</div>

I found that lowering the Jerk helped with mine… Only happened on certain prints, and reducing jerk in the slicer fixed the problem.

---

<div class="post-metadata">

**Author:** ![Besideupside](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/b/ecae2f/32.png) [@Besideupside](https://3dprintingspace.com/u/Besideupside)\
**Post date:** [March 1, 2021, 2:33pm UTC](https://3dprintingspace.com/t/layer-shift-in-the-exact-same-spot/1829/7 "2021-03-01T14:33:51Z")

</div>

Thanks. I feel there is so much I need to learn about the slicers, I’ve spent too much time on mechanical issues