# Like not always available on first post

**URL:** <https://3dprintingspace.com/t/like-not-always-available-on-first-post/2710>\
**Category:** Site Feedback\
**Created:** [June 18, 2021, 9:06pm UTC](https://3dprintingspace.com/t/like-not-always-available-on-first-post/2710 "2021-06-18T21:06:41Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![LEGOManiac](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/l/ba8739/32.png) [@LEGOManiac](https://3dprintingspace.com/u/LEGOManiac)\
**Post date:** [June 18, 2021, 9:06pm UTC](https://3dprintingspace.com/t/like-not-always-available-on-first-post/2710/1 "2021-06-18T21:06:41Z")

</div>

I’ve noticed that the Like option doesn’t appear on all first posts.

This first post has one, for example:

> [@BSOD on Ender 5 Pro after shorting thermistor](https://3dprintingspace.com/t/bsod-on-ender-5-pro-after-shorting-thermistor/2707):
>
> Hi, folks. So, last week I’d had a bad nozzle clog. As I was removing the nozzle to clean it out, I loosened the heat break (Micro Swiss all-metal hotend). After cleaning up the nozzle and putting things back together, I wanted to make sure the heat break was solidly in the heater block. My understanding is that it should be tightened once more after the block is hot. So I duly heated everything up to 220 (what the instructions recommended for tightening the nozzle) and got in there with th…

But this one doesn’t:

> [@Great satsana duct](https://3dprintingspace.com/t/great-satsana-duct/2708):
>
> Ender 3 with satsana duct works great, if anyone is looking for a good print in place fan duct this one is amazing, and there are remixes for the bltouch or 5010 cooling fan. Great and simple setup works great on my ender 3 with mircoswiss direct drive and bltouch.

I only noticed this because I had wanted to “like” the second one to show my appreciation for the author’s recommendation of a fan shroud.

Is the inconsistency intentional?

---

<div class="post-metadata">

**Author:** ![Redracefpv](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/redracefpv/32/1056_2.png) [@Redracefpv](https://3dprintingspace.com/u/Redracefpv)\
**Post date:** [June 18, 2021, 11:39pm UTC](https://3dprintingspace.com/t/like-not-always-available-on-first-post/2710/2 "2021-06-18T23:39:51Z")

</div>

I don’t know much about that like issue but thanks for looking at my comment

---

<div class="post-metadata">

**Author:** ![Jason](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/jason/32/6148_2.png) [@Jason](https://3dprintingspace.com/u/Jason)\
**Post date:** [June 13, 2022, 2:20pm UTC](https://3dprintingspace.com/t/like-not-always-available-on-first-post/2710/3 "2022-06-13T14:20:27Z")

</div>

I have noticed that as well, I never really paid attention until you mention it, I will look into it and see what I can find out.

---

<div class="post-metadata">

**Author:** ![Jason](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/jason/32/6148_2.png) [@Jason](https://3dprintingspace.com/u/Jason)\
**Post date:** [June 13, 2022, 4:12pm UTC](https://3dprintingspace.com/t/like-not-always-available-on-first-post/2710/4 "2022-06-13T16:12:29Z")

</div>

Liking the first post is not enabled.

You should see it on all posts in any category.

---

<div class="post-metadata">

**Author:** ![Jason](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/jason/32/6148_2.png) [@Jason](https://3dprintingspace.com/u/Jason)\
**Post date:** [June 16, 2022, 3:33pm UTC](https://3dprintingspace.com/t/like-not-always-available-on-first-post/2710/5 "2022-06-16T15:33:49Z")

</div>

Just an update, the Problem has been resolved, and Liking is now available on all posts including the first post in a thread.