# M3302 NG Revo Direct Drive Extruder, Rotation Reversed

**URL:** <https://3dprintingspace.com/t/m3302-ng-revo-direct-drive-extruder-rotation-reversed/8873>\
**Category:** Creality Ender 5 Plus\
**Created:** [July 8, 2024, 4:29pm UTC](https://3dprintingspace.com/t/m3302-ng-revo-direct-drive-extruder-rotation-reversed/8873 "2024-07-08T16:29:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JohnNoon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/e95f7d/32.png) [@JohnNoon](https://3dprintingspace.com/u/JohnNoon)\
**Post date:** [July 8, 2024, 4:29pm UTC](https://3dprintingspace.com/t/m3302-ng-revo-direct-drive-extruder-rotation-reversed/8873/1 "2024-07-08T16:29:29Z")

</div>

Hello  
After upgrading my Ender 5 Plus with the Micro Swiss NG Revo direct drive extruder model M3302 The extruder is running backwards, I have used the included wiring harness extension as per directions.  
I would like to reverse the extruder motor direction at the connector if possible.

Thank you for any help

John

---

<div class="post-metadata">

**Author:** ![Matthew](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/matthew/32/7552_2.png) [@Matthew](https://3dprintingspace.com/u/Matthew)\
**Post date:** [July 9, 2024, 6:05pm UTC](https://3dprintingspace.com/t/m3302-ng-revo-direct-drive-extruder-rotation-reversed/8873/2 "2024-07-09T18:05:42Z")

</div>

Try this and see if it works for you!

[![](https://storage.3dprintingspace.com/original/2X/2/228bf30af0f9c58cc755c6bbb50d70f2bb534bd9.jpeg "Stepper motor spinning wrong direction Quick FIX!!") ](https://www.youtube.com/watch?v=s3r9z0CZ808)