# Mini Furniture and vests for Lego Mini-figures

**URL:** <https://3dprintingspace.com/t/mini-furniture-and-vests-for-lego-mini-figures/2248>\
**Category:** 3D Printing Gallery\
**Created:** [April 7, 2021, 4:53pm UTC](https://3dprintingspace.com/t/mini-furniture-and-vests-for-lego-mini-figures/2248 "2021-04-07T16:53:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![TurkeyOnRye](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/turkeyonrye/32/1788_2.png) [@TurkeyOnRye](https://3dprintingspace.com/u/TurkeyOnRye)\
**Post date:** [April 7, 2021, 4:53pm UTC](https://3dprintingspace.com/t/mini-furniture-and-vests-for-lego-mini-figures/2248/1 "2021-04-07T16:53:31Z")

</div>

Recently I’ve been making mini furniture items to add to Lego scenes, here are a couple!

The fridge and oven range were printed with a 0.4mm nozzle.  
The vests are also done with a 0.4mm nozzle after struggling with a 0.2mm nozzle for a while 😅

I was originally going to print them quickly to test on a FDM machine then do the final prints in resin, but I’m quite happy with the quality of them as they are!  
Certain items I’ve tried  
(like a TV set with bunny ears) just didn’t work out in FDM, those I’ll have to do in resin.

 ![Screenshot_20210407-124054](https://storage.3dprintingspace.com/original/2X/6/6dba6b31f9eaf9fdc1fa3be9f05acc69cfbf1a99.jpeg) ![Screenshot_20210407-124338](https://storage.3dprintingspace.com/original/2X/1/17fa15c7f52d075a702995e1ac9e7fd26c540890.jpeg) ![Screenshot_20210407-124324](https://storage.3dprintingspace.com/original/2X/3/3a4ef47ec717c17f0ab898f03faddd0b173aae88.jpeg)

---

<div class="post-metadata">

**Author:** ![LEGOManiac](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/l/ba8739/32.png) [@LEGOManiac](https://3dprintingspace.com/u/LEGOManiac)\
**Post date:** [April 7, 2021, 6:25pm UTC](https://3dprintingspace.com/t/mini-furniture-and-vests-for-lego-mini-figures/2248/2 "2021-04-07T18:25:17Z")

</div>

Nicely done! How long did the appliances take to print?

---

<div class="post-metadata">

**Author:** ![TurkeyOnRye](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/turkeyonrye/32/1788_2.png) [@TurkeyOnRye](https://3dprintingspace.com/u/TurkeyOnRye)\
**Post date:** [April 7, 2021, 6:32pm UTC](https://3dprintingspace.com/t/mini-furniture-and-vests-for-lego-mini-figures/2248/3 "2021-04-07T18:32:32Z")

</div>

Not long at all, they are about 0.5 - 3 hours each.

The table that the cat is on, that is basically hidden on the right side only takes about 35 minutes. The fridge, with 5% infill took 2.5 hours.